Abstract:Fine modeling of a three‐dimensional fracture structure under dynamic loading of coal is carried out. The streamline distribution law of pressure and velocity field in the loading process of the coal specimen is analyzed, the absolute permeability of the coal specimen is calculated, and the feasibility of the pore network model algorithm and finite element coupling technology is verified. Microscopic fracture structure assessment and seepage simulation are important ways to reveal the macroscopic flow mechanism of coalbed methane in complex low‐permeability hard coal. The flow characteristics of coalbed methane (CBM) are influenced by the coal rock fracture network, which serves as the primary gas transport channel. This has a significant effect on the permeability performance of coal reservoirs. In any case, the traditional techniques of coal rock fracture observation are unable to precisely define the flow of CBM. In this study, coal samples were subjected to an in situ loading scanning test in order to create a pore network model (PNM) and determine the pore and fracture dynamic evolution law of the samples in the loading path. On this basis, the structural characteristic parameters of the samples were extracted from the PNM and the impact on the permeability performance of CBM was assessed. The findings demonstrate that the coal samples' internal porosity increases by 2.039% under uniaxial loading, the average throat pore radius increases by 205.5 to 36.1 μm, and the loading has an impact on the distribution and morphology of the pores in the coal rock. The PNM was loaded into the finite element program COMSOL for seepage modeling, and the M3 stage showed isolated pore connectivity to produce microscopic fissures, which could serve as seepage channels. In order to confirm the viability of the PNM and COMSOL docking technology, the streamline distribution law of pressure and velocity fields during the coal sample loading process was examined. The absolute permeability of the coal samples was also obtained in order for comparison with the measured results. The macroscopic CBM flow mechanism in complex low‐permeability coal rocks can be revealed through three‐dimensional reconstruction of the microscopic fracture structure and seepage simulation. This study lays the groundwork for the fine description and evaluation of coal reservoirs as well as the precise prediction of gas production in CBM wells.

Extraction and numerical simulation of gas–water flow in low permeability coal reservoirs based on a pore network model

Pore-scale modeling of pore structure properties and wettability effect on permeability of low-rank coal

Pore-scale Simulation of Gas-Water Flow in Low Permeability Gas Reservoirs

Analytical solution and evolution process of gas permeability coefficient on typical hard-soft composite coal seam

Experimental studies on the movable-water saturations of different-scale pores and relative permeability of low-medium rank coals from the Southern Junggar Basin

A relative permeability model for CBM reservoir

A study on the flowability of gas displacing water in low-permeability coal reservoir based on NMR technology

Permeability evolution and gas flow in wet coal under non-equilibrium state: Considering both water swelling and process-based gas swelling

Image-based quantitative probing of 3D heterogeneous pore structure in CBM reservoir and permeability estimation with pore network modeling

Experiment, Model, and Mechanism of Multiscale Dynamic Diffusion–Permeability in Coal under Different Fluids

3D Reconstruction of Pore and Fracture Structures in Crushed Soft Coal with Low Permeability and Its Permeability Analysis: Implications for the Design of CO2 Injection and CH4 Production

Influence of Pore Structure Characteristics of Low Permeability Coal on Gas Nonlinear Seepage

Experiment on the Gas Permeability and Gas–Water Relative Permeability in High-Rank Coal with a Self-Developed Device

3D microfracture network and seepage characteristics of low-volatility bituminous coal based on nano-CT

In situ loading of a pore network model for quantitative characterization and visualization of gas seepage in coal rocks

A numerical investigation of hydraulic fracturing on coal seam permeability based on PFC-COMSOL coupling method

Reconstruction of 3D Micro Pore Structure of Coal and Simulation of Its Mechanical Properties

Hydraulic-Mechanical Coupling Model with Dual-Porosity Dual-Permeability for Anisotropy Coal Seams and Its Application in Mine Gas Extraction

Relative permeability measurement of coal microchannels using advanced microchip technology

Comprehensive Analysis of Connectivity and Permeability of a Pore-Fracture Structure in Low Permeability Seam of Huainan-Huaibei Coalfield

Analysis of a Middle-Rank Coal Reservoir on a Triple Porosity/Dual Permeability Model