Abstract:Recycling industrial solid waste for mine backfill is one of the best ways to achieve green production in multiple industries. In this paper, the desulfurization gypsum (DG) as an activator is combined with the modified magnesium slag-fly ash cementitious paste backfill (MFPB) technology for the co-disposal of solid waste and goaf treatment, and the influence of DG on the performance of MFPB was comprehensively analyzed through rheological properties, mechanical properties, durability, microscopic analysis and environmental characteristics experiments. The results show that the fresh MFPB mortar conforms to the Herschel-Bulkley model at different maximum shear rate (γ̇max) conditions. When the γ̇max is 100 s-1, the mortar exhibits shear-thickening properties. The apparent viscosity, yield stress and static yield stress of mortar decreased first and then increased with the increase of DG content, and all had the minimum value when DG was 2.5 %. The thixotropy of the mortar was significantly increased with the addition of DG, and the change in thixotropy was significantly correlated with the difference between the two yield stresses. Both the rheological and mini-slump results demonstrate that DG can improve the flowability of MFPB mortars. In addition, the UCS of D0 under steam curing and standard water curing conditions for 28 d were 4.342 MPa and 2.827 MPa, and the sample containing DG were 6.109-8.241 MPa and 6.669-9.492 MPa, respectively. The addition of DG not only improves the strength of MFPB, but also improves the durability of MFPB. Microscopic analysis (XRD, SEM, and TG-DTG) indicated that this was mainly because DG promoted the hydration reaction of the MMS-FA system and accelerated the generation of C-S(A)-H and AFt. Finally, in the results of in situ leaching based on durability and leaching based on standard HJ 557, all the indexes of MFPB meet the standard of class III groundwater in GB/T 14848-2017, and it has an effective stabilization/solidification effect on heavy metals (As, Cu, Ni, Ba, Zn and Mo, etc.). To sum up, the collaboration of DG and MFPB technology can not only efficiently clean and utilize a variety of solid wastes (MMS, FA and DG), but also greatly improve the performance of MFPB to promote its application.

Utilization of discarded bauxite tailings into eco-friendly foamed mixture lightweight soil

Optimal Utilization of Low-Quality Construction Waste and Industrial Byproducts in Sustainable Recycled Concrete

Animal-Protein-Based and Synthetic-Based Foamed Mixture Lightweight Soil Doped with Bauxite Tailings: Macro and Microscopic Properties

Novel recycling application of high volume municipal solid waste incineration bottom ash (MSWIBA) into sustainable concrete

Co-disposal of magnesium slag and high-calcium fly ash as cementitious materials in backfill

Reuse of soil-like material solidified by a biomass fly ash-based binder as engineering backfill material and its performance evaluation

Properties and environmental impact of building foundation pit backfilling materials containing iron and steel solid waste

Effect of Cementitious Material Composition on the Performance of Low-Carbon Foamed Lightweight Soil

Recycling multisource industrial waste residues as green binder for cemented ultrafine tailings backfill: Hydration kinetics, mechanical properties, and solidification mechanism

Solidification and stabilization of Pb-Zn mine tailing with municipal solid waste incineration fly ash and ground granulated blast-furnace slag for unfired brick fabrication

Mechanical Properties and Microstructural Features of Biomass Fly Ash-Modified Self-Compacting Coal Gangue-Filled Backfill

Synthesis of cemented paste backfill by reutilizing multiple industrial waste residues and ultrafine tailings: Strength, microstructure, and GA-GPR prediction modeling

Experimental study on full-volume slag alkali-activated mortars: Air-cooled blast furnace slag versus machine-made sand as fine aggregates

Optimization of Proportions of Alkali-Activated Slag–Fly Ash-Based Cemented Tailings Backfill and Its Strength Characteristics and Microstructure under Combined Action of Dry–Wet and Freeze–Thaw Cycles

Application of desulfurization gypsum as activator for modified magnesium slag-fly ash cemented paste backfill material

Mechanical property and microstructure of cemented tailings backfill containing fly ash activated by calcium formate

Development of a Commercial Screed Mortar with Low OPC Content by Incorporation of Biomass Fly Ash

Material innovation and performance optimization of multi-solid waste-based composite grouting materials for semi-flexible pavements

Sustainable binary/ternary blended mortars with recycled water treatment sludge using fly ash or blast slag: Characterization and environmental-economical impacts

Environmental filling materials based on phosphogypsum powder with municipal solid waste incineration ash

Multisolid waste collaborative production of aeolian sand-red mud-fly ash cemented paste backfill