Abstract:Both thermal cyclic lifetime and thermal barrier performance are essentially important to the application of thermal barrier coatings (TBCs). In this study, equivalent thermal insulation conception is introduced to the design of TBCs to fairly compare different structured TBCs. Dense vertically crack (DVC) structured TBCs and the lamellar structured TBCs with same top coat thickness of 1000µm (D1000 and L1000), and lamellar structured TBCs with 570µm (L570, equivalent thermal insulation performance with D1000) top coat were prepared. Their lifetimes were evaluated under gradient thermal cyclic test. D1000 TBC shows a rather longer lifetime than L1000 TBC because of the alleviation of vertically cracks, but D1000 TBC possesses a much lower thermal barrier performance than L1000 TBC due to the dense structure of D1000 TBC. However, for the TBCs with the same equivalent thermal insulation performance, L570 TBC presents a more than two times longer lifetime than D1000 TBC. TGO thickening and phase transformation were proved not responsible for the failure of L1000 and D1000 TBCs in the present condition. The in-plane elastic modulus and Vickers hardness across top coat thickness were examined, and the results proved that the mechanical evolution of the top coat after high temperature exposure resulting in the competition between driving force and cracking resistance dominates the failure behavior of TBCs. This study is beneficial for the comprehensively understanding of the failure behavior of DVC and lamellar structured TBCs, and thereby shed light to further coating structure optimization and design innovation.

Experimental investigation of high-temperature insulation performance of vacuum encapsulated ceramic fiber-board

Sintering Induced the Failure Behavior of Dense Vertically Crack and Lamellar Structured TBCs with Equivalent Thermal Insulation Performance

An Elevated-Temperature Depth-Sensing Instrumented Indentation Apparatus for Investigating Thermo-Mechanical Behaviour of Thermal Barrier Coatings.

Experimental and theoretical studies on high-temperature thermal properties of fibrous insulation

Theoretical and Experimental Study on a Compound Insulation System for High Temperature Applications

A matching design co-enhancing thermal barrier and thermal cyclic performances of sintering-resistant coatings

Durable TBCs with Self-Enhanced Thermal Insulation Based on Co-Design on Macro- and Microstructure

A Theoretical analysis and experimental study of effective thermal conductivities of high temperature insulations

Carbon nanotube reinforced pyrocarbon matrix composites with high coefficient of thermal expansion for self-adapting ultra-high-temperature ceramic coatings

Ablation Experiments of Ultra-High-Temperature Ceramic Coating on Carbon–Carbon Composite Using ICP Plasma Wind Tunnel

Numerical analysis and experimental investigation on thermal bridge effect of vacuum insulation panel

Research on thermal insulation performance and application simulation of high-temperature vacuum insulation panel

Investigating the Cmas Corrosion Resistance and Thermal Cycling Failure Behavior of Porous Thermal Barrier Coatings with Different Morphologies Prepared by Plasma Spraying

Fabrication and characterization of a novel high-temperature vacuum insulation composites with SiC nanowire core material

Preparation and Thermal Performance Analysis of Novel Multilayer Cladding Structure Composites

Mechanical and dual-stage wind tunnel ablative behavior of ceramic fiber-tile reinforced phenolic aerogel

Numerical and Experimental Studies on the In-Situ Measurement of Thermal Conductivity of the Thermal Barrier Coating

Numerical Modeling and Experimental Study of Heat Transfer in Ceramic Fiberboard

Achieving Self-Enhanced Thermal Barrier Performance Through a Novel Hybrid-Layered Coating Design

Effect of Heat Treatment at 900 °C on Microstructural and Mechanical Properties of Thermal Barrier Coatings

Rear Earth Oxide Multilayer Deposited by Plasma Spray-Physical Vapor Deposition for Envisaged Application as Thermal/Environmental Barrier Coating