Abstract:Rotating cavities with axial throughflow are found inside the compressor rotors of turbo-machines. The flow pattern and heat transfer in the cavities are known as sophisticated problems. Because of the numerical errors and model errors, as well as the stiffness introduced by low-Ma number, prediction of 3D unsteady flow and heat transfer in rotating cavity is still a challenge for modern CFD technology. An in-house 3D unsteady CFD code was developed in this study. The discontinuous galerkin method, which can fulfill any high-order accuracy on the unstructured grid, was applied to reduce the discretization errors. The SST-γ-Reθ transition model proposed by Menter was applied to reduce the model errors. To overcome the stiffness and achieve good convergence characteristics and solution quality, the preconditioning matrix technique combined with DG method was introduced for low-Ma number viscous flow. First, natural convection of air in a square cavity was studied to test the code. The feasibility and credibility, of applying the DG method and the preconditioned matrix technique for buoyancy–induced Rayleigh-Bénard like flow, were further verified. Second, the 3D compressible flow field in a rotating cavity was investigated numerically using the FV method, DG method and laminar/SA/SST-transition turbulence model. It is demonstrated that the whole flow structure of all calculated cases was similar after comparing the calculated results with the available experimental data. But, the transition turbulence model fitted the experimental data better. On the other hand, the performance of high-order method was much better for both the rotating cavity flow and natural convection, in terms of heat transfer. To better understand this phenomenon, an accuracy analysis of heat flux using DG method and FV method was performed. It showed the DG method could realize arbitrary precision of viscous stress and heat fluxes on irregular unstructured grids, while the FV method could only realize the first-order accuracy of the heat fluxes at the boundary faces and may exhibit erroneous behaviors. It also demonstrated that the high-order accuracy of gradients was needed to decrease errors of heat fluxes and viscous stresses, and that DG method was a promising method.

Analysis of cavity disk heat transfer by solving inverse heat transfer problem

Analysis of Shroud and Disk Heat Transfer in Aero-Engine Compressor Rotors

Numerical simulation of internal flow in forward-curved centrifugal fan

Dimensionless analysis of flow and heat transfer characteristics in a high-speed rotor–stator disk cavity based on similarity criteria

Numerical Investigations of Flows and Heat Transfer in Turbine Disk Cavities

Coupled Fluid-Thermal-Solid Simulation of Axial Through-Flow Rotating Cavities

The Highly Turbulent Flow and Heat Transfer in Semi-Closed Rotating Disc Cavity

Numerical investigation on the flow and heat transfer in a rotor-stator disc cavity

Flow Structures and Heat Transfer Characteristics in a Vaneless Counter-Rotating Turbine Cavity with Different Cooling Inflows

Numerical Investigation of Flows Between Rotating Disks

Axial Thrust, Disk Frictional Losses, and Heat Transfer in a Gas Turbine Disk Cavity

Experimental Investigation of Heat Transfer in a Rotor–stator Cavity with Cooling Air Inlet at Low Radius

Investigation Of The Unstable Flow Structure In A Rotating Cavity

Prediction of 3d Unsteady Flow and Heat Transfer in Rotating Cavity by Discontinuous Galerkin Method and Transition Model

Flow and Heat Transfer in a Rotating Disc Cavity With Axial Throughflow at High Speed Conditions

Determination of heat transfer coefficient in a T-shaped cavity by means of solving the inverse heat conduction problem

Numerical Study of Unsteady Flow and Heat Transfer of Circular Tangential Direction Jets Flowing over the Inner Cylinder Surface in the Annular Chamber

Numerical Investigation of Flow and Heat Transfer in a Rotor-Stator Cavity with Centripetal Carbon Dioxide Through-Flow

Heat Transfer Characteristics Of A Rotor-Stator System With Small Radial Outflow

Conjugate Heat Transfer Analysis of a High Pressure Turbine Vane with Radial Internal Cooling Passages

Analysis of the aerothermal performance of modern commercial high-pressure turbine rotors using different levels of fidelity