Abstract:A broadband all-optical plane-wave ultrasound imaging system for high-resolution 3-D imaging of biological tissues is presented. The system is based on a planar Fabry-Perot (FP) scanner for ultrasound detection and the photoacoustic generation of ultrasound in a carbon-nanotube-polydimethylsiloxane (CNT-PDMS) composite film. The FP sensor head was coated with the CNT-PDMS film which acts as an ultrasound transmitting layer for pulse-echo imaging. Exciting the CNT-PDMS coating with nanosecond laser pulses generated monopolar plane-wave ultrasound pulses with MPa-range peak pressures and a -6-dB bandwidth of 22 MHz, which were transmitted into the target. The resulting scattered acoustic field was detected across a 15 mm ×15 mm scan area with a step size of 100 [Formula: see text] and an optically defined element size of [Formula: see text]. The -3-dB bandwidth of the sensor was 30 MHz. A 3-D image of the scatterer distribution was then recovered using a k -space reconstruction algorithm. To obtain a measure of spatial resolution, the instrument line-spread function (LSF) was measured as a function of position. At the center of the scan area, the depth-dependent lateral LSF ranged from 46 to 65 [Formula: see text] for depths between 1 and 12 mm. The vertical LSF was independent of position and measured to be [Formula: see text] over the entire field of view. To demonstrate the ability of the system to provide high-resolution 3-D images, phantoms with well-defined scattering structures of arbitrary geometry were imaged. To demonstrate its suitability for imaging biological tissues, phantoms with similar impedance mismatches, sound speed and scattering properties to those present in the tissue, and ex vivo tissue samples were imaged. Compared with conventional piezoelectric-based ultrasound scanners, this approach offers the potential for improved image quality and higher resolution for superficial tissue imaging. Since the FP scanner is capable of high-resolution 3-D photoacoustic imaging of in vivo biological tissues, the system could ultimately be developed into an instrument for dual-mode all-optical ultrasound and photoacoustic imaging.

Spatially resolved readout of a Fabry–Perot ultrasound sensor interrogated through a multimode optical fiber using wavefront shaping

High-spatial-resolution Ultrasonic Sensor Using a Fiber-Optic Fabry–Perot Interferometer

SNR-enhanced Fiber-Laser Ultrasound Sensors for Photoacoustic Tomography

Fiber-Laser-Based Ultrasound Sensor for Photoacoustic Imaging

Tunable high-finesse fiber optic Fabry-Perot interferometer for photoacoustic tomography (Conference Presentation)

Miniaturized Fiber Optic Ultrasound Sensor with Multiplexing for Photoacoustic Imaging

Wavefront shaping and imaging through a multimode hollow-core fiber

Broadband Optical Ultrasound Sensor with a Unique Open-Cavity Structure

Wide-field Photoacoustic Microscopy with a Fiber Laser Ultrasound Sensor

Ultrasonic Sensitivity-Improved Fabry–Perot Interferometer Using Acoustic Focusing and Its Application for Noncontact Imaging

Broadband All-Optical Plane-Wave Ultrasound Imaging System Based on a Fabry-Perot Scanner

Photoacoustic computed tomography with lens-free focused fiber-laser ultrasound sensor

High-spatial-resolution ultrasonic sensor using a micro suspended-core fiber.

Single-shot hybrid photoacoustic-fluorescent microendoscopy through a multi-mode fiber with wavefront shaping

Multi-channel parallel ultrasound detection based on a photothermal tunable fiber optic sensor array

A Fabry–Perot Fiber-Optic Array for Photoacoustic Imaging

Photothermally Tunable Fabry-Pérot Fiber Interferometer for Photoacoustic Mesoscopy.

125 Μm Fiber Based All-Optical Ultrasound Probes for Pulse-Echo Imaging

Prospects on ultrasound measurement techniques with optical fibers

Fiber-Laser-Based Ultrasound Sensors for Fast-Scanning in Vivo Photoacoustic Microscopy

Photoacoustic Mesoscopy with Lower Cost: Using Photothermal Tunable Fabry-Perot Interferometric Ultrasound Sensor