Abstract:The mechanical properties of Czochralski (Cz) silicon wafers dictate fundamental limits on the fabrication of diverse electronic devices. Certain impurities with sufficiently high concentrations may affect the mechanical properties of Cz silicon. The underlying mechanisms for such influences have been being explored in the past decades. In this work, the effects of antimony (Sb)- and tin (Sn)-doping at 1018 cm−3 level on the mechanical properties of Czochralski (Cz) silicon have been comparatively investigated. Since Sb and Sn have quite close tetrahedral covalent radii in silicon, the lattice strains resulted from Sb- and Sn-doping and their consequent effects on the mechanical properties of silicon are approximately identical. In silicon, Sb is an electrically active impurity while Sn is a neutral one. Therefore, the present work can essentially reveal the role of electrical activity of Sb playing in the mechanical properties of Cz silicon. It is found that Sb-doped Cz (Sb-Cz) silicon possesses a slightly higher hardness than Sn-doped Cz (Sn-Cz) silicon. Moreover, the dislocation gliding at 500 or 600 °C in Sb-Cz silicon requires a much larger critical resolved shear stress than that in Sn-Cz silicon. At such two temperatures, Sb-Cz silicon remains to be n-type in electrical conduction. The aforementioned two results are believed to be ascribed to the resistance of dislocation motion by the Coulomb interaction between the positively charged Sb ions and the dislocations that are deep-level acceptors thus being negatively charged in Sb-Cz silicon. As the temperature is increased to 700 °C and above, the dislocation gliding in Sb-Cz silicon is not substantially different from that in Sn-Cz silicon. At such elevated temperatures, Sb-Cz silicon becomes intrinsic in electrical conduction like Sn-Cz silicon. In this context, there is no Coulomb interaction between Sb ions and dislocations anymore to impede the dislocation gliding in Sb-Cz silicon. In addition, it is found that the indentation fracture toughness of Sb-Cz is almost the same as that of Sn-Cz silicon. Actually, the fracture of silicon is essentially a cleavage process, to which the electrical activity of Sb is irrelevant.

Effect of solute Ce, Mn, and Si on mechanical properties of silicon steel: insights from DFT calculations

Effects of Antimony- and Tin-Doping on the Mechanical Propertiesof Czochralski Silicon: Revealing the Role of Electrical Activity of Antimony

Effects of metalloid Si on the microstructure and mechanical properties of Fe36Ni36Cr10Mo1Al17-XSiX alloys

Effect of Si on Fe-rich intermetallic formation and mechanical properties of heattreated Al-Cu-Mn-Fe alloys

Effects of Si on the Microstructure and Work Hardening Behavior of Fe‒17Mn‒1.1C‒xSi High Manganese Steels

Structural, electronic, magnetic and mechanical properties of Fe<sub>2</sub>SiC

Effects of dilute substitutional solutes on carbon in $α$-Fe: interactions and associated carbon diffusion from first-principles calculations

Substitution behavior of Cu doped into Fe 3 Si and its effect on the electronic structure and mechanical properties based on first-principles calculation

Effect of Silicon Addition on Phosphorus Segregation at Grain Boundary and Temper Embrittlement of Fe-C-Mn-xSi Steels

Influence of Si content on the microstructure and mechanical properties of silicon stainless steel

Influence of silicon addition on intercritical annealing process and tensile properties of medium Mn steel

First-principles Calculations of the Mechanical Properties of Mg2Si Intermetallic Via Ternary Elements Doping

Study on the Influence of Grain Size and Microstructure on the Mechanical Properties of Fe-6.5 wt%Si High Silicon Steel Prepared by CVD Method

Effect of Sb doping on microstructure, mechanical and electronic properties of Mg2Si in Mg2Si/AZ91 composites by experimental investigation and first-principles calculation

Effect of Si on Microstructure and Mechanical Properties of FeCrNi Medium Entropy Alloys

Effects of Mn and Si on the ferrite decarburization of spring steel

Silicon in Die Steels

Influence of Silicon on Microstructure and Mechanical Properties of Fe-(4.5-7.0)%Si High-silicon Steel

Improving Mechanical Properties of EP823 Ferritic/Martensitic Steel Via Increasing Silicon Contents

Effect of Rare Earth Ce on Structure and Properties in 7CrSiMnMoV Die Steel Castings

Effect of Si content on interfacial reaction and properties between solid steel and liquid aluminum