Abstract:High-pressure die casting (HPDC) is a widely used process with short cycle times to manufacture complex shapes of aluminium castings for the automotive industry. Most of the die casting companies use specialized commercial software to simulate molten metal filling and solidification. This approach works satisfactorily and is industrially accepted for defect prediction capability. Die cooling is an effective technique to reduce internal porosity in die cast components. But die cooling process is not completely captured in the approach used in the casting simulations. This often resulted in false positives in the defect predictions. One of the main reasons for the lack of precision in simulation is the uncertainty in assigning the boundary conditions such as heat transfer coefficients (HTC) for the die cooling channel. In this study, a coupled simulation strategy was developed to determine accurate HTC values of the die cooling channel. The computational domain was divided into two sub-domains, i.e. , casting zone and die cooling zone. Two different industrially accepted simulation tools were used: (a) for casting simulation and (b) for turbulent fluid flow and heat transfer simulation in the cooling channel. A series of iterations were performed by exchanging information at the interface between the two sub-domains till the convergence was achieved. Experiments were also conducted with a thermocouple inserted in the die and the actual die temperature readings were measured. The converged simulation results agreed well with the experimental measurements. Also, the influence of flow rate on HTC was studied by conducting experiments with two different flow rates and the castings produced were analyzed with the help of CT scan analysis, micro-structure evaluation and thermal imaging. The obtained results demonstrated the efficacy of the method adopted in prescribing the values of heat transfer conditions in casting simulations. With the coupled simulation approach developed in this work, parametric studies were conducted to maximize the heat removal rate from a given die, for different flow velocities, nozzle diameters, cooling hole diameters and nozzle-to-surface spacings.

Parametric Study for Runner Modifications of Die Casted Part with Venting Systems

Numerical and Experimental Analysis on Runner and Gate Positioning for Magnesium Alloy Die-Casted Test Piece

A runner-optimization design study of a die-casting die

The molding analysis of automobile parts using the die-casting system

Design and optimization of runner and gating systems, in high-pressure casting and sand casting, for an aluminum alloy valve cover

Study on a CAD/CAE system of die casting

Finite element analysis for die casting parameters in high-pressure die casting process

Determination of casting parameters of thick wall die-casting of magnesium alloy and simulation of its processing

Analyzing casting defects in high-pressure die casting industrial case study

Numerical Simulation and Optimization of Indirect Squeeze Casting Process

The optimization accuracy control of a die-casting product part

Virtual prototyping in the design process of optimized mould gating system for high pressure die casting

Optimization of Gating System Design for Die Casting of Thin Magnesium Alloy-Based Multi-Cavity LCD Housings

Effects of Process Parameters on Internal Quality of Castings During Novel Casting

Design and Optimization of Runner and Gating Systems for Vacuum Die Casting of Magnesium Through Numerical Simulation

Improving the quality of die castings through optimal plunger motion planning: analytical computation and experimental validation

Study of Flow and Heat Transfer in High Pressure Die Casting Cooling Channel

Development and Validation using Casting Simulation of a Multi-point Remote Monitoring System for High-Pressure Die-Casting (HPDC) Mold Cavity

Computer-Aided Engineering (CAE) Simulation for the Robust Gating System Design: Improved Process for Investment Casting Defects of 316L Stainless Steel Valve Housing

Effects of Process Parameters on Shrinkage Porosity in 357 Semi-Solid Die Casting Parts