Abstract:Abstract The reliability and safety of aero-engine are often the decisive factors for the safe and reliable flight of commercial aircraft. Hence, the vibration source location and fault diagnosis of aero-engine are of prime importance to detect faults and carry out fast and effective maintenance in time. However, the vibration signals collected by the sensors arranged on the casing of the aero-engine are generally the mixed signals of the main vibration sources inside the engine, and the components are extremely complicated. Therefore, the vibration source identification is a big challenge for a fault diagnosis and health management of the engine. In order to separate the key vibration sources of rotating machinery such as aero-engine, a Joint Wavelet Transform and Time Synchronous Averaging based algorithm (JWTS) is proposed in this paper. Based on the fact that the fundamental frequency and its harmonic and sub-harmonic components are generally included in the vibration spectrum of shaft fault signal of rotating machinery, wavelet transform and time synchronous averaging algorithm are combined to extract them. The algorithm completes separating the main vibration sources with three steps. First, the source number and fundamental frequency of each source are estimated using the wavelet transform. Second, every source is extracted from each observed signal by the time synchronous averaging method. Time synchronous averaging method can effectively extract a signal of cycle and harmonic rotor components and can suppress noise. Third, the optimal estimation of each source is determined according to signal’s 2-norm. Since the extracted source with a larger energy is closer to the real source, and signal’s 2-norm is a good indicator of the signal energy. Hence, the key vibration sources related to rotary speeds of the engine are obtained separately. The method is verified by synthetic mixed signals first. Three periodic signals of different frequencies are used to simulate the vibration sources of the aeroengine. The fundamental, harmonic and sub-harmonic components of them, as well as Gaussian white noise, are randomly mixed. The results show that the JWTS algorithm can estimate the number of the main sources and can extract each source effectively. Then the method is demonstrated using vibration signals of a real aero-engine. The results indicate that the proposed JWTS method has extracted and located the main sources within the aero-engine, including sources from the low-pressure rotor, high-pressure rotor, combustion chamber and accessory. Therefore, the proposed method provides a new fault diagnosis technology for rotating machinery, especially for a real aero-engine.

An aeroengine fault diagnosis method using high-frequency acoustic coupling with rotating blade flow field

High-resolution localization of rotating acoustic sources: An experimental investigation and axial fan application

Improved High Resolution Estimation Approach for Rotor Fault Diagnosis

Time–Frequency Postprocessing Method Based on Generalized S-Transform and Its Application to Aeroengine Rotor System Fault Diagnosis

Time-frequency Post-Processing Method Based on Generalized S-transform and Its Application to Aero Engine Rotor System Fault Diagnosis

A Conceptual Study of Utilizing Compressive-Sensing-based Fan Noise Mode Detection for Aeroengine Prognostic and Health Management.

Fusion Fault Diagnosis Approach to Rolling Bearing with Vibrational and Acoustic Emission Signals

Fault diagnosis of aeroengine fan based on generative adversarial network and acoustic features

A novel transformer-enhanced and acoustic-based approach for wind turbine blade fault detection with integrated system implementation

A rapid identification technology of turbine low frequency faults based on multi-source information fusion method

Fault Diagnosis of Demountable Disk-Drum Aero-Engine Rotor Using Customized Multiwavelet Method

A Compressive-Sensing-based Method for Radial Mode Analysis of Aeroengine Fan Noise

Aerodynamic Noise-Based Fault Detection for Wind Turbine Blades: an Online Unsupervised Approach

A Multisensor Information Fusion Method for High-Reliability Fault Diagnosis of Rotating Machinery

Early Fault Detection Method for Rotating Machinery Based on Harmonic-Assisted Multivariate Empirical Mode Decomposition and Transfer Entropy

Joint Wavelet Transform and Time Synchronous Averaging Source Separation Method and its Application on Aero-Engine

Experimental investigation of aeroelastic instabilities in an aeroengine fan: Using acoustic measurements

Fault diagnosis of rotating machines based on the EMD manifold

Feature Extraction Based on the 3D Spectrum Analysis of Acoustic Signals to Identify Rotor Malfunction

Wind turbine blade fault detection by acoustic analysis: Preliminary results

Fault Diagnosis of Industrial Wind Turbine Blade Bearing Using Acoustic Emission Analysis