Abstract:Abstract The reliability and safety of aero-engine are often the decisive factors for the safe and reliable flight of commercial aircraft. Hence, the vibration source location and fault diagnosis of aero-engine are of prime importance to detect faults and carry out fast and effective maintenance in time. However, the vibration signals collected by the sensors arranged on the casing of the aero-engine are generally the mixed signals of the main vibration sources inside the engine, and the components are extremely complicated. Therefore, the vibration source identification is a big challenge for a fault diagnosis and health management of the engine. In order to separate the key vibration sources of rotating machinery such as aero-engine, a Joint Wavelet Transform and Time Synchronous Averaging based algorithm (JWTS) is proposed in this paper. Based on the fact that the fundamental frequency and its harmonic and sub-harmonic components are generally included in the vibration spectrum of shaft fault signal of rotating machinery, wavelet transform and time synchronous averaging algorithm are combined to extract them. The algorithm completes separating the main vibration sources with three steps. First, the source number and fundamental frequency of each source are estimated using the wavelet transform. Second, every source is extracted from each observed signal by the time synchronous averaging method. Time synchronous averaging method can effectively extract a signal of cycle and harmonic rotor components and can suppress noise. Third, the optimal estimation of each source is determined according to signal’s 2-norm. Since the extracted source with a larger energy is closer to the real source, and signal’s 2-norm is a good indicator of the signal energy. Hence, the key vibration sources related to rotary speeds of the engine are obtained separately. The method is verified by synthetic mixed signals first. Three periodic signals of different frequencies are used to simulate the vibration sources of the aeroengine. The fundamental, harmonic and sub-harmonic components of them, as well as Gaussian white noise, are randomly mixed. The results show that the JWTS algorithm can estimate the number of the main sources and can extract each source effectively. Then the method is demonstrated using vibration signals of a real aero-engine. The results indicate that the proposed JWTS method has extracted and located the main sources within the aero-engine, including sources from the low-pressure rotor, high-pressure rotor, combustion chamber and accessory. Therefore, the proposed method provides a new fault diagnosis technology for rotating machinery, especially for a real aero-engine.

Time-frequency Post-Processing Method Based on Generalized S-transform and Its Application to Aero Engine Rotor System Fault Diagnosis

Time–Frequency Postprocessing Method Based on Generalized S-Transform and Its Application to Aeroengine Rotor System Fault Diagnosis

A New Procedure for Extracting Fault Feature of Multi-Frequency Signal from Rotating Machinery

An energy time-convexity second-order synchrosqueezing transform and application in weak fault diagnosis of rolling bearings in an aerospace engine

Robust post-processing time frequency technology and its application to mechanical fault diagnosis

Joint Wavelet Transform and Time Synchronous Averaging Source Separation Method and its Application on Aero-Engine

A Bilateral Second-Order Synchrosqueezing Transform And Application To Vibration Monitoring Of Aerospace Engine

High-order Synchrosqueezing Wavelet Transform and Application to Planetary Gearbox Fault Diagnosis

Adaptive window rotated second-order Synchroextracting Transform and its application in fault diagnosis of wind turbine gearbox

Matching Synchrosqueezing Transform: A Useful Tool for Characterizing Signals with Fast Varying Instantaneous Frequency and Application to Machine Fault Diagnosis

Matching Synchroextracting Transform for Mechanical Fault Diagnosis Under Variable-Speed Conditions

Parameterized Synchrosqueezing Transform with Application to Machine Fault Diagnosis

A New Improved Synchrosqueezing Transform Based on Adaptive Short Time Fourier Transform

Improved High Resolution Estimation Approach for Rotor Fault Diagnosis

A Parameterized Iterative Synchrosqueezing Transform for the Analysis of Noise Contaminated Non-Stationary Signals

A High-Resolution Time-Frequency Analysis Tool for Fault Diagnosis of Rotating Machinery

Multi-Objective Matched Synchrosqueezing Chirplet Transform for Fault Feature Extraction From Marine Turbochargers

Joint High-Order Synchrosqueezing Transform and Multi-Taper Empirical Wavelet Transform for Fault Diagnosis of Wind Turbine Planetary Gearbox under Nonstationary Conditions

Wavelet-based Synchroextracting Transform: an Effective TFA Tool for Machinery Fault Diagnosis

Generalized S-Synchroextracting Transform for Fault Diagnosis in Rolling Bearing

Nonlinear Squeezing Time-Frequency Transform and Application in Rotor Rub-Impact Fault Diagnosis