Abstract:Phase change material (PCM) cooling has attracted great attention in battery thermal management applications due to its compact structure and large latent heat of phase change. This study constructs a thermal management system consisting of the paraffin/copper foam metal composite phase change material and heat pipe. The accuracy of the simulation model is verified by comparing the experimental data. Numerical simulations are performed on the operating voltage and temperature of lithium-ion battery packs under different charging rates and ambient temperatures. The results show that copper foam-paraffin composite phase change material has the advantage of high thermal conductivity. The heat pipe can disperse heat in time to ensure the temperature uniformity of the module.Compared with different thermal management systems, the study found that the system can control the module temperature rise and temperature difference at 5 °C and 0.7 °C when charging at 1C in a high-temperature environment. The cooling efficiency of the composite PCM-heat pipe coupling system is more efficient than that of natural cooling and composite PCM cooling. Through simulation verification, the system can meet the working requirements of modules under different environments and different charging rates. However, under the dual conditions of high temperature and high rate, refrigeration or liquid cooling coupling should be considered to assist management in the future. In addition, this paper studies the influence of the size change of center distance between cells on system performance. It is believed that reducing the Y space appropriately is beneficial to saving cost and improving energy density, but excessively reducing the X space will make the module temperature rise and temperature difference change greatly. To meet the dual requirements of material utilization rate and temperature control management, a more suitable size range is given.

Comparison study on cooling management of composite phase change material battery pack: Two different cases

Experimental and Numerical Study of PCM Thermophysical Parameters on Lithium-Ion Battery Thermal Management

Bidirectionally High Thermal Conductive Phase Change Materials with Arrayed Radially Oriented Boron Nitride Nanosheets for Battery Pack Thermal Management

Experimental Investigation on the Heat Dissipation Effect of Power Battery Pack Cooled with Phase Change Materials

Numerical study of paraffin and glass fiber composites for thermal management of lithium‐ion battery packs

Numerical investigation on integrated thermal management for a lithium-ion battery module with a composite phase change material and liquid cooling

Experimental studies and comprehensive computational investigations on composites-based phase change material for battery thermal management systems in electric vehicles

Novel metallic separator coupled composite phase change material passive thermal design for large format prismatic battery pack

Heat Transfer Performance Study on Several Composite Phase Change Materials for Battery Thermal Management

Modeling analysis on the cooling efficiency of composite phase change material-heat pipe coupling system in battery pack

Optimization of heat transfer and temperature control of battery thermal management system based on composite phase change materials

Experimental and Simulative Investigation on Battery Thermal Management System with Structural Optimization of Composite Phase Change Material

Experimental Study of Temperature Control Based on Composite Phase Change Materials during Charging and Discharging of Battery

Experimental study on thermal behavior of PCM-module coupled with various cooling strategies under different temperatures and protocols

Simulation Analysis of Battery Thermal Management System Using Phase Change Material (PCM)

Research on Thermal Management Coupling by CPCM and Liquid Cooling for Vehicle Lithium-Ion Batteries

Experimental Study of a Passive Thermal Management System Using Expanded Graphite/Polyethylene Glycol Composite for Lithium-Ion Batteries

Enhancing Thermal Performance and Cooling Solutions of Phase Change Material in Battery Thermal Management System: A Computational Analysis

Experimental and numerical study on the cooling performance of heat pipe assisted composite phase change material-based battery thermal management system

Thermal Characteristics of Li‐ion Battery based on Phase Change Material‐Aluminum Plate‐Fin Composite Heat Dissipation

Effect Analysis on Thermal Management of Power Batteries Utilizing a Form-Stable Silicone Grease/Composite Phase Change Material