Abstract:Enhanced geothermal systems (EGS) play a crucial role in the shift from fossil to renewable energy. The Utah Frontier Observatory for Research in Geothermal Energy (FORGE) is a large-scale experimental EGS that aims to overcome setbacks faced by EGS projects, such as economic viability and concerns about induced seismic activity, by studying new tools and strategies. Four circulation experiments were conducted after the completion of the well doublet at a depth of 2.5 km in granitoid rock. The circulation experiments showed that the injection well and the production well were successfully connected via the fracture network that was created during the 2022 stimulation treatments pumped in the injection well. Still, the flow during the circulations was relatively low. We analyze the microseismic activity induced during the circulation experiments using only five (near-)surface stations of the permanent seismic network. The circulation-induced microseismic rates and magnitudes ( < M0.45) are similar to those observed for the stimulations one year before, which is unexpected for fluid flow through pre-stimulated rock volumes. We image the complex seismic response of the reservoir during the circulation by using full-waveform-based analyses for event detection and relative relocations. We apply the same workflow to the stimulations in 2022 and the circulation in 2023 and calibrate the event locations of the stimulations with high-quality downhole locations. This approach allows obtaining reliable event locations for the circulation experiments, overcoming the reduced resolution of the permanent seismic network compared to downhole monitoring systems. Consequently, we can differentiate between aseismic volumes and seismically highly productive volumes. Our study shows that due to the complexity of the fracture network within the granitoid rock, poorly stimulated volumes may exist within zones mapped by large-scale microseismic clouds. Hence, the presence of microseismic activity may not guarantee the presence of stimulated fractures that can enable efficient fluid flow, and the lack of microseismic activity does not imply the lack of stimulated fractures. The microseismic activity was induced predominately after the shut-in, which we attribute to the complex dynamics of opening, propagating, and closing hydraulic fractures in the absence of major conductive features that allow for substantial flow into the production well.

Proof of Concept in a Full-Scale Field Test for the Novel Micro-Turbine Drilling Technology from a Cased Borehole in Granite Rock

Assessment of a medium-deep borehole thermal energy storage site in the crystalline basement: A case study of the demo site Lichtwiese Campus, Darmstadt

Micro-scale investigation of the pore network of sandstone in the Pannonian Basin to improve geothermal energy development

A Combined Thermal Spallation and Melting Technology by Plasma Jet for Deep and Hard Rock Reservoirs

Deep geothermal: The ‘Moon Landing’ mission in the unconventional energy and minerals space

Optimizing Deep Geothermal Drilling for Energy Sustainability in the Appalachian Basin

Multi-Disciplinary Monitoring Networks for Mesoscale Underground Experiments: Advances in the Bedretto Reservoir Project

Close Observation of Hydraulic Fracturing at EGS Collab Experiment 1: Fracture Trajectory, Microseismic Interpretations, and the Role of Natural Fractures

Transverse Hydraulic Fracture Initiation: Insights from Intermediate-Scale Hydraulic Fracture Tests

Successful implementation of HT geothermal drilling technology in Kenya

Optimizing Micro-CT Resolution for Geothermal Reservoir Characterization in the Pannonian Basin

Theoretical and practical realisation of perspective thermal spallation drilling technology

Rock breaking characteristics by swirling impeller abrasive water jet (SAWJ) on granite

MARTE: Technology development and lessons learned from a Mars drilling mission simulation

Development of a Novel TBM Tunnelling Test Platform and Its Application in Rock–Machine Interaction Analysis

Application of Measurement While Drilling Technology to Predict Rock Mass Quality and Rock Support for Tunnelling

Circulation experiments at Utah FORGE: Near-surface seismic monitoring reveals fracture growth after shut-in

Experimental and Numerical Simulation Study on the Mechanism of Fracture-Increasing and Permeability-Increasing in Granite Pore Walls by the Air DTH Hammer Percussion Drilling

Evaluation of Lost Circulation Material Sealing for Geothermal Drilling

Towards a multi-physics multi-scale approach of deep geothermal exploration

Seismic Response of Hectometer‐Scale Fracture Systems to Hydraulic Stimulation in the Bedretto Underground Laboratory, Switzerland