Abstract:The Molasse Basin is one of the most promising areas for deep geothermal exploration in Germany and a very ambitious project in this region is to power the entire district heating system of the city of Munich with renewable energies by 2040; a major part of this will consist of geothermal energy. As part of a joint project (financed by the German Federal Ministry For Economic Affairs And Energy; FKZ 0324332B) the Leibniz Institute for Applied Geophysics (LIAG) works together with the Munich City Utilities (Stadtwerke M&#252;nchen), to improve reservoir characterization and sustainable reservoir exploration within the German Molasse Basin. The target horizon for hydrothermal exploration is the aquifer in the Upper Jurassic carbonates. A major problem is the strong heterogeneity of the carbonates. Compared to quantity and quality of the structural data of the reservoir, the database of reservoir properties such as density, porosity and permeability, which describe the geothermal potential, is insufficient. Therefore, it is necessary to generate such data in order to improve the value of the structural information. A 3D seismic survey cannot only provide structural information, but also important reservoir properties such as elastic parameters and seismic attributes. One of the most important attributes is the acoustic impedance, which can be determined with a seismic inversion and used to estimate a porosity volume.The data basis for this study was the 170km&#178; GRAME-3D seismic survey measured in Munich, a structural geological model, and drilling and logging data from the geothermal site &#8220;Sch&#228;ftlarnstra&#223;e&#8221;.The inversion results show low impedance values at the top of the reservoir, but also at the middle part. Spatially, the intermediate block of the Munich fault shows low values but also the eastern part of the hanging wall block and the western part of the footwall block. Based on a well correlation a relationship between acoustic impedance and porosity could be determined and a 3D porosity volume was calculated. In the upper part but also in the middle part of the reservoir areas with increased porosity (>10%) are shown, which might indicate a high geothermal potential.For a better classification, an attribute analysis was performed. The intermediate block and the eastern part of the hanging wall block show strongly fractured rocks. In contrast, there are hardly any conspicuous features in the western part of the footwall block, although high porosities are also expected here. This suggests that the presence of faults is not the only factor favoring high porosities in carbonates. More likely is a combination with karstification processes, which is why even areas that do not show enhanced tectonic deformation have high porosities.

Micro-scale investigation of the pore network of sandstone in the Pannonian Basin to improve geothermal energy development

Optimizing Micro-CT Resolution for Geothermal Reservoir Characterization in the Pannonian Basin

Influence of sedimentary architecture on static connectivity and geothermal doublet performance (Mezőberény, SE Hungary)

Cements, Waters, and Scales: An Integrated Study of the Szeged Geothermal Systems (SE Hungary) to Characterize Natural Environmental Conditions of the Thermal Aquifer

Comparing petrophysical properties and pore network characteristics of carbonate reservoir rocks using micro X-ray tomography imaging and microfacies analyses

Visualization and Quantification of Capillary Drainage in the Pore Space of Laminated Sandstone by A Porous Plate Method Using Differential Imaging X-Ray Microtomography

Digital reconstruction of reservoir sandstones to predict hydraulic and mechanical rock properties

Geological modeling of a tectonically controlled hydrothermal system in the southwestern part of the Pannonian basin (Croatia)

Characterisation of the fracture- and karst-controlled geothermal reservoir below Munich from geophysical wireline and well information

Demonstration of a successful soft chemical stimulation in a geothermal sandstone reservoir in Mezőberény (Hungary)

Porosity estimation and characterization of a geothermal carbonate reservoir in the South German Molasse Basin based on seismic inversion and attribute analysis

Differential imaging of porous plate capillary drainage in laminated sandstone rock using X-ray micro-tomography

Combined interpretation of geophysical, hydrogeochemical and environmental isotope data in a distal lobe of the Maros fluvial fan, Hungary – A novel approach in aquifer characterisation

Towards a multi-physics multi-scale approach of deep geothermal exploration

Synchrotron-based pore-network modeling of two-phase flow in Nubian Sandstone and implications for capillary trapping of carbon dioxide

Pore Structure and Connectivity of Tight Sandstone Reservoirs in Petroleum Basins: A Review and Application of New Methodologies to the Late Triassic Ordos Basin, China

Analytical Study of Permeability Properties of Loose Sandstone Based on Thermal-Hydraulic-Mechanical (THM) Coupling

Evaluation of the Percolation Sensitivity of Loose Sandstone Using Digital Core Technology

Size Effect on Pore-Scale Variables and Heterogeneous Pore-Network Characteristics in Carbonate Rocks

Prospects for increasing fluid production from sand and clay formations within the Precarpathian and Transcarpathian troughs