Abstract:This paper provides the methodology and performance assessment of multi-GNSS signal processing for the detection of small-scale high-rate dynamic displacements. For this purpose, we used methods of relative (RTK) and absolute positioning (PPP), and a novel direct signal processing approach. The first two methods are recognized as providing accurate information on position in many navigation and surveying applications. The latter is an innovative method for dynamic displacement determination with the use of GNSS phase signal processing. This method is based on the developed functional model with parametrized epoch-wise topocentric relative coordinates derived from filtered GNSS observations. Current regular kinematic PPP positioning, as well as medium/long range RTK, may not offer coordinate estimates with subcentimeter precision. Thus, extended processing strategies of absolute and relative GNSS positioning have been developed and applied for displacement detection. The study also aimed to comparatively analyze the developed methods as well as to analyze the impact of combined GPS and BDS processing and the dependence of the results of the relative methods on the baseline length. All the methods were implemented with in-house developed software allowing for high-rate precise GNSS positioning and signal processing. The phase and pseudorange observations collected with a rate of 50 Hz during the field test served as the experiment's data set. The displacements at the rover station were triggered in the horizontal plane using a device which was designed and constructed to ensure a periodic motion of GNSS antenna with an amplitude of ~3 cm and a frequency of ~4.5 Hz. Finally, a medium range RTK, PPP, and direct phase observation processing method demonstrated the capability of providing reliable and consistent results with the precision of the determined dynamic displacements at the millimeter level. Specifically, the research shows that the standard deviation of the displacement residuals obtained as the difference between a benchmark-ultra-short baseline RTK solution and selected scenarios ranged between 1.1 and 3.4 mm. At the same time, the differences in the mean amplitude of the oscillations derived from the established scenarios did not exceed 1.3 mm, whereas the frequency of the motion detected with the use of Fourier transformation was the same.

EVALUATION OF A GNSS/IMU/LIDAR-INTEGRATION FOR AIRBORNE LASER SCANNING USING RTKLIB PPK AND PPP GNSS SOLUTIONS

MOBILE LASER SCANNING WITH LOW-COST NAVIGATION SENSORS: COMPENSATING FOR LOW-GRADE IMU WITH DUAL-GNSS AND TIGHTLY-COUPLED LIDAR

GP-SLAM plus : real-time 3D lidar SLAM based on improved regionalized Gaussian process map reconstruction

A Test on the Potential of a Low Cost Unmanned Aerial Vehicle RTK/PPK Solution for Precision Positioning

EVALUATION OF LIDAR ODOMETRY AND MAPPING BASED ON REFERENCE LASER SCANNING

PPK PROCESSING TO BOOST UAS ACCURACY IN CADASTRAL MAPPING

A GNSS/INS/LiDAR Integration Scheme for UAV-Based Navigation in GNSS-Challenging Environments

3D LiDAR Aided GNSS NLOS Mitigation for Reliable GNSS-RTK Positioning in Urban Canyons

Evaluating the Performance of Multi-Scan Integration for UAV LiDAR-based Tracking

Hybrid georeferencing of images and LiDAR data for UAV-based point cloud collection at millimetre accuracy

REAL-TIME LIDAR-INERTIAL POSITIONING AND MAPPING FOR FORESTRY AUTOMATION

A LiDAR aiding ambiguity resolution method using fuzzy one-to-many feature matching

Reliability of Real-Time Kinematic (RTK) Positioning for Low-Cost Drones' Navigation across Global Navigation Satellite System (GNSS) Critical Environments

Camera-Aided Orientation of Mobile Lidar Point Clouds Acquired from an Uncrewed Water Vehicle

High-Precision Positioning and Mapping Using Feature-based RTK/LiDAR/INS Integrated System for Urban Environments

LiDAR-based Registration against Georeferenced Models for Globally Consistent Allocentric Maps

EVALUATION OF CONSUMER-GRADE AND SURVEY-GRADE UAV-LIDAR

Performance of LiDAR-SLAM-based PNT with initial poses based on NDT scan matching algorithm

Feature-Aided RTK/LiDAR/INS Integrated Positioning System with Parallel Filters in the Ambiguity-Position-Joint Domain for Urban Environments

LiDAR Scan Matching Aided Inertial Navigation System in GNSS-Denied Environments

Multi-GNSS high-rate RTK, PPP and novel direct phase observation processing method: application to precise dynamic displacement detection