Abstract:Time- and precision-critical applications, such as autonomous driving, have extremely rigorous standards for continuous high-precision positioning. The importance of precise point positioning (PPP) technology for self-navigation equipment is self-evident by delivering decimeter-/centimeter-level absolute position accuracy in a global coordinate framework. Nevertheless, the prolonged initialization period renders PPP almost too difficult to be widely used for time-critical applications in real transportation scenarios, for example, in city canyons and overpasses. We proposed a method to accomplish continuous decimeter-level positioning by leveraging triple-frequency GNSS observations with an Inertial Navigation System (INS) aiding in urban environments. In the proposed method, the inertial measurements and the original tri-frequency pseudorange and carrier phase measurements are tightly fused in an extended Kalman filter to obtain the optimal state estimate. Afterwards, with precise extra-wide-lane (EWL) and wide-lane (WL) Uncalibrated Phase Delay (UPD) products, the EWL and WL ambiguities can be resolved sequentially to implement instantaneous decimeter-level positioning. Exploiting the short-term high-precision characteristic of the INS, the continuity of the PPP solution can be ameliorated noticeably, and the ability of decimeter-level positioning can be maintained effortlessly throughout the navigation process. With land vehicle data collected, several experiments are undertaken to comprehensively assess the capability of the proposed system in urban scenarios, taking the solution obtained by a commercial post-processing software as the reference. The single-epoch decimeter-level position estimation can be captured instantaneously for WL ambiguity-fixed PPP solutions. Furthermore, for WL ambiguity-fixed PPP/INS-integrated solutions, the position estimation is better than 0.2 m for horizontal components and improved by 40–90% compared with that of the WL ambiguity-fixed PPP solutions. More importantly, the availability rate of positioning accuracy is better than 0.3 m in the horizontal direction and 0.5 m in the up direction reaching 93.91%, whereas it is only 53.78% for WL ambiguity-fixed PPP solutions. Overall, the WL ambiguity-fixed PPP/INS-integrated solutions have the favorable performance to maintain continuous decimeter-level positioning for self-navigation equipment, even if full GNSS outages are encountered.

Multi-GNSS high-rate RTK, PPP and novel direct phase observation processing method: application to precise dynamic displacement detection

Detection of Structural Vibration with High-Rate Precise Point Positioning: Case Study Results Based on 100 Hz Multi-GNSS Observables and Shake-Table Simulation

The Real-Time Detection of Vertical Displacements by Low-Cost GNSS Receivers Using Precise Point Positioning

Principle and performance of multi-frequency and multi-GNSS PPP-RTK

RANSAC-based instantaneous real-time kinematic positioning with GNSS triple-frequency signals in urban areas

Multi-frequency and multi-GNSS PPP-RTK for vehicle navigation in urban environments

Long-Baseline Real-Time Kinematic Positioning: Utilizing Kalman Filtering and Partial Ambiguity Resolution with Dual-Frequency Signals from BDS, GPS, and Galileo

Study on the Positioning Accuracy of the GNSS/INS System Supported by the RTK Receiver for Railway Measurements

Assessment of the Real-Time and Rapid Precise Point Positioning Performance Using Geodetic and Low-Cost GNSS Receivers

Investigation of real-time kinematic multi-GNSS precise point positioning with the CNES products

A Trajectory Similarity-Based Method to Evaluate GNSS Kinematic Precise Positioning Performance with a Case Study

Feasibility of Using Low-Cost Dual-Frequency GNSS Receivers for Land Surveying

PPP-RTK with Rapid Convergence Based on SSR Corrections and Its Application in Transportation

Continuous Decimeter-Level Positioning in Urban Environments Using Multi-Frequency GPS/BDS/Galileo PPP/INS Tightly Coupled Integration

An Improved Relative GNSS Tracking Method Utilizing Single Frequency Receivers

Low-Cost GNSS and PPP-RTK: Investigating the Capabilities of the u-blox ZED-F9P Module

An Improved Long-Period Precise Time-Relative Positioning Method Based on RTS Data

Using PPP Information to Implement a Global Real-Time Virtual Network DGNSS Approach

GNSS-based Cooperative Instantaneous Precise Positioning Aided by Multi-epoch and Multi-agent Associations

Low-Cost GNSS Receivers for Local Monitoring: Experimental Simulation, and Analysis of Displacements

Triple-Frequency Bds And Dual-Frequency Gps Combination Rtk Algorithm For Moving Baseline Relative Positioning