Design and theoretical analysis of broadband bend-resistant low-loss hollow-core anti-resonant fiber

Mengya Cai,Weihua Shi,Yue Lou,Yuying Gu

DOI: https://doi.org/10.1364/ao.522374

IF: 1.9

2024-07-19

Applied Optics

Abstract:Mengya Cai, Weihua Shi, Yue Lou, Yuying Gu With the development of modern fiber-optic communication technology, bend-resistant low-loss fiber within the S+C+L bands is essential to ... [Appl. Opt. 63, 5692-5698 (2024)]

optics

What problem does this paper attempt to address?

Modeling bending losses of optical nanofibers or nanowires.

Huakang Yu,Shanshan Wang,Jian Fu,Min Qiu,Yuhang Li,Fuxing Gu,Limin Tong

DOI: https://doi.org/10.1364/AO.48.004365

IF: 1.9

2009-01-01

Applied Optics

Abstract:Bending losses of nanofibers or nanowires with circular 90 degrees bends are simulated using a three-dimensional finite-difference time-domain (3D-FDTD) method. Dependences of bending losses on wavelength and polarization of guided light are investigated, as well as the diameters, refractive indices, and bending radii of nanowires. The acceptable bending losses (approximately 1 dB/90 degrees) predicted in glass, polymer, and semiconductor nanowires with bending radii down to micrometer level may offer valuable references for assembling highly compact photonic integrated circuits or devices with optical nanowires.
Low-loss, Single-Polarization, Anti-Bending Anti-Resonant Fiber Applicable to the Small Flexibility Field

Jingkai Zhou,Feng Wang,Yuejiang Song,Mi Li,Peng Mao,Qiang Chen

DOI: https://doi.org/10.1364/oe.540148

IF: 3.8

2024-01-01

Optics Express

Abstract:In this paper, a novel hollow-core anti-resonant optical fiber is proposed. We confirm that the U-shaped nested tubes can better compress the fiber core compared with the circular and semi-circular nested tubes to further reduce the loss and improve the single polarization characteristics. The proposed optical fiber has an ultra-low loss of 0.005 dB/m in the considered wavelength range. This is difficult to achieve in most of the previous studies. In the common wavelength band of 1550 nm, the designed fiber achieves a birefringence of about 3 × 10-5 and a single polarization PER index of 2259 and is capable of polarization filtering with a broadband of 16 nm. Meanwhile, the proposed structure still has extremely excellent bending resistance. The critical bending radius of the designed structure is approximately 0.4 cm. It also confirms that our proposed structure has a certain ability to withstand harsh environments and can be widely applied in small, flexible fields. We believe that the designed structure has a wider range of applications in the field of fiber optic communication systems that are more sensitive to polarization, such as fiber optic gyroscopes, optical amplifiers, and fiber lasers.
Design of Hollow-core Anti-resonant Optical Fiber Based on Bragg Elements with Low-Loss and Wide Bandwidth

Lisha Ding,Ming-Yang Chen,Jin-Long Ding

DOI: https://doi.org/10.1088/1402-4896/ad6495

2024-07-18

Physica Scripta

Abstract:A type of anti-resonant hollow-core optical fiber consisting of Bragg elements is proposed. The confinement and bending losses are numerically simulated using the finite element method. It is found that the introduction of concentric rings to form anti-resonant structure can reduce the mode transmission loss by 2~4 orders of magnitude compared with the anti-resonant element composed of only one dielectric layer, therefore it can achieve ultra-low loss optical transmission. The influence of the structural parameters on the confinement loss was investigated. Furthermore, it is demonstrated that each dielectric layer independently contributes to the confinement of the core modes. It is also found that the Bragg reflection structure can effectively suppress the coupling between core and cladding modes, and achieve broadband low-loss optical transmission under small bending radius. In particular, it can achieve a low transmission loss of less than 0.1 dB/km over a wide wavelength range of 600 nm at the bending radius of 3 cm.

physics, multidisciplinary
Design and Fabrication of Super-fine Low Water-peak Bend-resistant Optical Fiber

ZHANG Li-yong,WU Xing-kun,LU Wei-min,LI Qun-xing,HUANG Xiao-peng

IF: 0.6

2007-01-01

ACTA PHOTONICA SINICA

Abstract:A novel refractive index profile for low bending loss fiber was proposed and the influence on the fiber bending loss was analyzed in detail as a function of various factors,including core diameter, first cladding thickness,difference between core-cladding refractive indices,and ratio of core to cladding diameter.By utilizing Complete Synthetic Technology (VAD+OVD) for the fabrication of optical fiber preforms,combining with a modified fiber drawing technique,a series of super-fine low water-peak bend-resistant optical fibers were fabricated and tested,with a naked diameter as small as 80 μm and coated diameter of 140 μm.The fiber is capable of meeting the standard transmission requirement when being bended to a radius as low as 7.5 mm.
Low Bending Loss Nodeless Hollow-core Anti-Resonant Fiber

Shoufei Gao,Yingying Wang,Xiaolu Liu,Pu Wang

DOI: https://doi.org/10.48550/arXiv.1602.03587

2016-02-11

Optics

Abstract:We report a high performance nodeless hollow-core anti-resonant fiber with a broadband guidance from 1050 nm to >1900 nm, a transmission attenuation of 200 dB/km, and a low bending loss of 0.25 dB/m for a 5 cm radius at wavelength of 1550 nm.
Design and Study of Low Loss, High Birefringence Quasi-Symmetric Hollow-Core Anti-Resonant Fiber

Binhao Gao,Fang Tan,Dexiao Chen,Shunfa Cui,Zhiyong Hou,Yuze Zhang,Weichun Wang,Yumeng Ban,Dechun Zhou

DOI: https://doi.org/10.3390/photonics11070675

IF: 2.536

2024-07-19

Photonics

Abstract:Low-loss, high-birefringence, bend-resistant hollow-core anti-resonant fibers for infrared wavelengths have important applications in the fields of precision interferometric sensing, laser systems, and optical communications. In this paper, an eight-tube cladding quasi-symmetric hollow-core anti-resonant fiber is proposed, and two other anti-resonant fibers are designed based on this fiber structure. The finite element analysis method is used to numerically analyze the limiting loss, birefringence coefficient, bending resistance, and other properties of the three optical fibers after the optimized design. The results show that the limiting loss of the three optical fibers at λ = 1.55 μm is lower than 10−4 magnitude, and all of them obtain a birefringence coefficient of 10−4 magnitude; at the same time, the three optical fibers have their own characteristics and advantages, and the first optical fiber can reach a birefringence coefficient of 9.25 × 10−4 at λ = 1.52 μm.The limiting loss at λ = 1.55 μm is 3.42 × 10−5 dB/km. The minimum bending radius of the three types of anti-resonant fibers is less than 40 mm, which represents good bending characteristics, and the eight-tube cladding quasi-symmetric optical fiber has a bending loss of less than 2.10 × 10−3 dB/km when the bending radius is 28 mm. The three types of optical fibers have obtained good results in improving the mutual constraints between low limiting loss and high birefringence, with better results than the other two types. The obtained results have high development potential.

optics
Theoretical Analysis and Fabrication of a Nested Antiresonant Hollow-Core Fiber with Low Tight Bend Loss

Jie Zhu,Caoyuan Wang,Yu Qin,Cong Xiong,Ye Wang,Zhende Zhai,Yichun Shen,Limin Xiao

DOI: https://doi.org/10.1109/jlt.2024.3382012

IF: 4.7

2024-01-01

Journal of Lightwave Technology

Abstract:The low tight bend-loss of antiresonant hollow-core fibers (AR-HCFs) is critical for many practical applications. In this paper, we provide an approximate analytical formula for the nested AR-HCFs to predict its critical bend radius for the first time, deepening physical insight of its bending mechanism and allowing straightforward design of low tight bend-loss nested AR-HCFs. We further carried out fabrication experiments of nested AR-HCFs and characterized their bending performance. A low bend loss of 0.039 dB/m at 1550 nm under a tightest bend radius of 1.8 cm is achieved. Our theoretical and experimental investigation of tight bend loss in nested AR-HCFs can provide useful design strategies and enhance the applicability of nested AR-HCFs in tight bend circumstances.

engineering, electrical & electronic,optics,telecommunications
Design and analysis for a bend-resistant and large-mode-area photonic crystal fiber with hybrid cladding

Yan Qin,Huajun Yang,Ping Jiang,Fengji Gui,Weinan Caiyang,Biao Cao

DOI: https://doi.org/10.1364/AO.57.003976

2018-05-10

Abstract:In this paper, an asymmetric large-mode-area photonic crystal fiber (LMA-PCF) with low bending loss at a smaller bending radius is designed. The finite-element method with a perfectly matched layer boundary is used to analyze the performance of the PCF. To achieve LMA-PCF with low bending loss, the air holes with double lattice constants and different sizes at the core are designed. Numerical results show that this structure can achieve low bending loss and LMA with a smaller bending radius at the wavelength of 1.55 μm. The effective mode area of the fundamental mode is larger than 1000 μm2 when the bending radius is ≥10 cm. The bending loss of the fundamental mode is just 0.0113 dB/m, and the difference between the fundamental and high-order modes of the bending loss is larger than 103 when the bending radius is 10 cm. Simulation results show this novel PCF can achieve LMA and have effective single-mode operation when the bending orientation angle ranges in ±110°. This novel photonic crystal has potential application in high-power fiber lasers.
Optimization method for low-loss single-mode bending negative curvature anti-resonant hollow-core fiber designed by mode modification.

Junyi He,Lizhong Hu,Yan Qin,W. Caiyang,P. Jiang,Huajun Yang,Miaofang Zhou,Jing Yang,Jingxin Deng

DOI: https://doi.org/10.1364/ao.476553

IF: 1.9

2022-11-29

Applied Optics

Abstract:A method of designing negative curvature anti-resonant hollow-core fibers (NC-AR-HCFs) with bending resistance is proposed, by which the fundamental mode (FM) and higher-order mode (HOM) can be adjusted. An asymmetric double-ring negative curvature hollow-core fiber (ADR-NC-HCF) is proposed to verify the method. The ADR-NC-HCF achieves the FM loss of 0.8 dB/km at 1550 nm under the bending radius of 20 mm. The coupling relation between the modes in ADR-NC-HCFs is analyzed revealing the physical principle of the design method. Based on the principle, the fiber can be directionally optimized to achieve a lower loss of the FM or higher-order mode extinction ratio.

Physics,Medicine,Engineering
Reseach Progress of Bent Waveguide and Its Applications

Gao Feng,Qin Li,Chen Yong-yi,Jia Peng,Chen Chao,Liang Lei,Chen Hong,Zhang Xing,Ning Yong-qiang

DOI: https://doi.org/10.3788/co.20171002.0176

2017-01-01

Abstract:The loss mechanism of bent waveguide including the bending loss, propagation loss, radiation loss and the loss of mode conversion are theorically analysed in this paper.It focuses on the review of the design of low loss bent waveguide, including materials, the shape of bent waveguide, strip or rib waveguide, the width, height and radius of the bent waveguide, the dismatch of mode, the shape of the curve and other new structures.The representative works on the design and fabrication of low loss bent waveguides are summarized.The development status of the low loss bent waveguide is analysed and its applications in integrated optical are introduced.The future developing trend of bent waveguide is to develope the theory of the loss characterization and wave coupling, and to realize low bending loss with very small bending radii for high desity integration in Photonics Integrated Circuits(PICs).
Antiresonant Hollow-core Fiber with Ultralow Bending Loss

Jie Zhu,Caoyuan Wang,Ruowei Yu,Ye Wang,Zhende Zhai,Limin Xiao

DOI: https://doi.org/10.1109/acp55869.2022.10088758

2022-01-01

Abstract:We have fabricated a 0.8-km long high performance antiresonant hollow-core fiber (AR-HCF) with a transmission attenuation of ~12 dB/km. And its bending loss behavior has been investigated theoretically and experimentally. The fabricated AR-HCF exhibits an outstanding anti-bending performance in wide wavelength range from 1300 nm to 1750 nm, and an ultralow bending loss @ 1612nm ≤10 dB/km at a bend radius of 1.6 cm is obtained.
Analytical formulation for the bend-loss in single-ring hollow-core photonic crystal fibers

Michael H. Frosz,Paul Roth,Mehmet C. Günendi,Philip St.J. Russell

DOI: https://doi.org/10.48550/arXiv.1611.02581

2016-11-09

Abstract:Understanding bend-loss in single-ring hollow-core photonic crystal fibers is becoming of increasing importance as the fibers enter practical applications. While purely numerical approaches are useful, there is a need for a simpler analytical formalism that provides physical insight and can be directly used in the design of PCFs with low bend-loss. We show theoretically and experimentally that a wavelength-dependent critical bend radius exists below which the bend-loss reaches a maximum, and that this can be calculated from the structural parameters of a fiber using a simple analytical formula. This allows straightforward design of single-ring PCFs that are bend-insensitive for specified ranges of bend radius and wavelength. It also can be used to derive an expression for the bend radius that yields optimal higher-order mode suppression for a given fiber structure.

Optics
The Research on Large-Mode-Area Anti-Bending, Polarization-Insensitive, and Non-Resonant Optical Fibers

Dinghao Zhou,Jingkai Zhou,Yuhang Du,Ruizhe Zhang,Hui Zou

DOI: https://doi.org/10.3390/electronics13101916

IF: 2.9

2024-05-15

Electronics

Abstract:In this paper, we propose a novel type of hollow-core anti-resonance fiber (HC-ARF). The cladding region of this fiber is formed by a combination of nested tubes and U-shaped tubes, and the centrally symmetric arrangement significantly reduces sensitivity to polarization. The influence of parameters on the performance of the designed HC-ARF LMA is analyzed by a finite element algorithm. The simulation results demonstrate that the designed structure achieves a large mode area of 3180 μm2, bending loss of 2 × 10−2 dB/km, and confinement loss of 5 × 10−3 dB/km at a wavelength of 1064 nm. Similarly, at a wavelength of 1550 nm, the large mode area, bending loss, and confinement loss are 3180 μm2, 1.4 × 10−2 dB/km, and 4 × 10−2 dB/km, respectively. These results indicate unprecedentedly large mode areas and ultra-low losses compared to previous studies. Within the bending radius under consideration, the bending loss remains below 1.35 × 10−2 dB/km. Furthermore, by increasing the fiber radius, the large mode area can reach an extraordinary 6250 μm2. The proposed device exhibits excellent mode area and outstanding polarization insensitivity, along with favorable bending performance. We believe that the designed fiber holds promising applications in high-power miniaturized fiber lasers, fiber amplifiers, and various high-power fiber communication systems, and it can be applied in sensors that require polarization insensitivity and better bending performance.

engineering, electrical & electronic,computer science, information systems,physics, applied
Recent Progress in Low-Loss Hollow-Core Anti-Resonant Fibers and Their Applications

Wei Ding,Ying-Ying Wang,Shou-Fei Gao,Meng-Ling Wang,Pu Wang

DOI: https://doi.org/10.1109/jstqe.2019.2957445

IF: 4.9

2020-07-01

IEEE Journal of Selected Topics in Quantum Electronics

Abstract:In the research field of hollow-core optical fiber (HCF), one type of fiber geometry with a leaky mode nature has unexpectedly taken center stage over the last couple of years: the so-called hollow-core anti-resonant fiber (ARF). The guidance mechanism of this ARF has been elucidated explicitly, the optical performance of the fiber has improved significantly, and the range of potential fiber application areas has expanded steadily. This paper will review our continuous efforts to understand, design, and fabricate this hollow-core ARF with the aim of lower loss and wider bandwidth. We also explore the possibility of using an advanced form of ARF in communications applications. In the long journey of looking for optical fibers that provide better performance than conventional solid-core glass fibers, exploitation of the hidden potential of artificial photonic micro-structures will continue to advance.

engineering, electrical & electronic,optics,physics, applied,quantum science & technology
Design and Analysis of a Large Mode Field Area and Low Bending Loss Multi-Cladding Fiber with Comb-Index Core and Gradient-Refractive Index Ring

Yining Zhang,Yudong Lian

DOI: https://doi.org/10.3390/s23115085

IF: 3.9

2023-05-26

Sensors

Abstract:The large mode field area fiber can raise the tolerance of power, and high requirements for the bending characteristics of optical fibers are needed. In this paper, a fiber composed of a comb-index core, gradient-refractive index ring, and multi-cladding is proposed. The performance of the proposed fiber is investigated by using a finite element method at a 1550 nm wavelength. When the bending radius is 20 cm, the mode field area of the fundamental mode can achieve 2010 μm2, and the bending loss is reduced to 8.452 × 10−4 dB/m. Additionally, when the bending radius is smaller than 30 cm, there are two variations with low BL and leakage; one is a bending radius of 17 cm to 21 cm, and the other is from 24 cm to 28 cm (except for 27 cm). When the bending radius is between 17 cm and 38 cm, the highest bending loss is 1.131 × 10−1 dB/m and the lowest mode field area is 1925 μm2. It has a very important application prospect in the field of high-power fiber lasers and telecom applications.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Design of 2 μm Low-Loss Hollow-Core Anti-Resonant Fibers

Tianran Sun,Xinyang Su,Fanchao Meng,Zaining Wang,Jiale Song,Chenglong Zhang,Tianjia Xu,Yunhong Zhang,Huaiwei Zhang,Mengdi Cui,Yi Zheng

DOI: https://doi.org/10.3390/mi14061198

IF: 3.4

2023-06-06

Micromachines

Abstract:We systematically studied several of the most traditional hollow-core anti-resonant fiber (HC-ARF) structures, with the aim of achieving low confinement loss, single-mode performance, and high insensitivity to bending in the 2 μm band. Moreover, the propagation loss of fundamental mode (FM), higher-order mode (HOMs), and the higher-order mode extinction ratio (HOMER) under different geometric parameters were studied. Analysis showed that the confinement loss of the six-tube nodeless hollow-core anti-resonant fiber at 2 μm was 0.042 dB/km, and its higher-order mode extinction ratio was higher than 9000. At the same time, a confinement loss of 0.040 dB/km at 2 was is achieved in the five-tube nodeless hollow-core anti-resonant fiber, and its higher-order mode extinction ratio was higher than 2700.

chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation,physics, applied
Low bending loss few-mode hollow-core anti-resonant fiber with glass-sheet conjoined nested tubes

Huabei Liu,Yu Wang,Yan Zhou,Zuguang Guan,Zhangwei Yu,Qiang Ling,Si Luo,Jie Shao,Dongmei Huang,Daru Chen

DOI: https://doi.org/10.1364/OE.446841

2022-06-06

Abstract:A novel hollow-core anti-resonant fiber (HC-ARF) with glass-sheet conjoined nested tubes that supports five core modes of LP01-LP31 with low mode couplings, large differential group delays (DGDs), and low bending losses (BLs) is proposed. A novel cladding structure with glass-sheet conjoined nested tubes (CNT) is induced for the proposed HC-ARF which can suppress mode couplings between the LP01-LP31 modes and the cladding modes. The higher-order modes (HOMs) which are LP11-LP31 modes also have very low loss by optimizing the radius of the nested tube and the core radius. Moreover, the large effective refractive index differences Δneff between HOMs are all larger than 1 × 10-4 which contributes to a large DGD in the wavelength range from 1.3 to 1.7 µm. The bending loss of the HC-ARF is analyzed and optimized emphatically. Our calculation results show that bending losses of LP01-LP31 modes are all lower than 3.0 × 10-4 dB/m in the wavelength range from 1.4 to 1.61 µm even when the fiber bending radius of the HC-ARF is 6 cm.
Design of Solid-Core Bragg Few-Mode Fiber for Short-Reach MDM Networks in O+C+L Band

Yuwei Su,Tianwen Zhangsun,Fang Ren,Yiying Zhang,Jie Yi,Wei Chen,Xiaojie Fan,Jianping Wang

DOI: https://doi.org/10.1016/j.optcom.2020.125245

IF: 2.4

2020-01-01

Optics Communications

Abstract:We propose a solid-core Bragg few-mode fiber with alternating layers of high/low refractive indices. The refractive index of the low-index layer in the cladding is the same as that of the fiber core. The influences of filling ratio, periodic structure width and core size on n(eff), Delta n(eff) and Alpha(eff) are investigated. Bending loss of each guided mode and differential mode delay (DMD) between adjacent spatial modes are also studied at 1550 nm. With appropriate geometrical parameters, the minimum effective refractive index difference (min Delta n(eff)) between adjacent modes is 2x10(-3) at 1550 nm. Wavelength-dependent performance is analyzed subsequently ranging from 1180 nm to 1630 nm. Numerical simulations indicate that such fiber could support 7 linearly polarized (LP) modes and have good bending insensibility performance. These results illustrate that the proposed fiber could be a promising candidate for mode division multiplexing to enhance optical transmission capacity.
Design of single-moded holey fibers with large-mode-area and low bending losses: the significance of the ring-core region

Yukihiro Tsuchida,Kunimasa Saitoh,Masanori Koshiba

DOI: https://doi.org/10.1364/oe.15.001794

2007-02-19

Abstract:One of the major trends in optical fiber science is to be able to obtain fibers with large-mode-area (LMA), optimized for various applications such as high power delivery, fiber amplifiers, and fiber lasers. In order to ensure the high beam quality and the ultimate controllability of the damage threshold in the fiber's material, it is required to have a LMA property and of course to operate in a single mode fashion. While the conventional fibers have some difficulties in providing simultaneously LMA, single mode operation, as well as low macro-bending loss characteristics, all-silica holey fibers are highly attractive candidates for realizing LMA single-mode fibers with low bending losses. In this paper, we present a novel type of effectively single-mode holey fibers with effective mode area of about 1400 mum(2), small allowable bending radius as small as 5 cm, good beam quality factor of 1.15, and high confinement losses exceeding 1 dB/m for the higher-order mode at 1.064-mum wavelength.
A Broadband Optical Fiber Coupler Based on Dual-Hollow Core Fiber

Zili Zhang,Huajin Chen,Changxu Wang,Yuan Li

DOI: https://doi.org/10.1088/1742-6596/2517/1/012009

2023-06-08

Journal of Physics: Conference Series

Abstract:Hollow fiber has become a research hotspot in the field of special fibers for its excellent characteristics, such as low loss, low delay, low dispersion, and low nonlinear coefficient. Due to the lack of fiber coupler matching hollow core fiber, the application development of hollow core fiber in the all-fiber integrated system is greatly hindered. Dual-core fiber is widely used in the development of fiber couplers because it can choose optical power, wavelength, and polarization state by the coupling between the two cores. For the urgent need for hollow core fiber coupler, the design and research of wideband fiber coupler based on dual-hollow core fiber are carried out in this paper. Based on the coupled mode theory, the theoretical correlation between the structural parameters and the coupling length in the dual-hollow core anti-resonant fiber was analyzed by using the COMSOL simulation software system. On this basis, a 50:50 wideband fiber coupler was designed by adjusting the structural parameters to reduce the coupling length and introducing the sleeve into the cladding pipe to reduce the loss. The bandwidth of the coupler is up to 150 nm and the transmission loss is on the order of 10 −2 dB/m.

English Else

Design and theoretical analysis of broadband bend-resistant low-loss hollow-core anti-resonant fiber

Modeling bending losses of optical nanofibers or nanowires.

Low-loss, Single-Polarization, Anti-Bending Anti-Resonant Fiber Applicable to the Small Flexibility Field

Design of Hollow-core Anti-resonant Optical Fiber Based on Bragg Elements with Low-Loss and Wide Bandwidth

Design and Fabrication of Super-fine Low Water-peak Bend-resistant Optical Fiber

Low Bending Loss Nodeless Hollow-core Anti-Resonant Fiber

Design and Study of Low Loss, High Birefringence Quasi-Symmetric Hollow-Core Anti-Resonant Fiber

Theoretical Analysis and Fabrication of a Nested Antiresonant Hollow-Core Fiber with Low Tight Bend Loss

Design and analysis for a bend-resistant and large-mode-area photonic crystal fiber with hybrid cladding

Optimization method for low-loss single-mode bending negative curvature anti-resonant hollow-core fiber designed by mode modification.

Reseach Progress of Bent Waveguide and Its Applications

Antiresonant Hollow-core Fiber with Ultralow Bending Loss

Analytical formulation for the bend-loss in single-ring hollow-core photonic crystal fibers

The Research on Large-Mode-Area Anti-Bending, Polarization-Insensitive, and Non-Resonant Optical Fibers

Recent Progress in Low-Loss Hollow-Core Anti-Resonant Fibers and Their Applications

Design and Analysis of a Large Mode Field Area and Low Bending Loss Multi-Cladding Fiber with Comb-Index Core and Gradient-Refractive Index Ring

Design of 2 μm Low-Loss Hollow-Core Anti-Resonant Fibers

Low bending loss few-mode hollow-core anti-resonant fiber with glass-sheet conjoined nested tubes

Design of Solid-Core Bragg Few-Mode Fiber for Short-Reach MDM Networks in O+C+L Band

Design of single-moded holey fibers with large-mode-area and low bending losses: the significance of the ring-core region

A Broadband Optical Fiber Coupler Based on Dual-Hollow Core Fiber