Abstract:As one of the most innovative cement-based materials, ultra-high performance concrete (UHPC), with excellent durability and mechanical properties, has been widely used in strengthening existing bridges. In this study, in-situ four-point bending tests were carried out to investigate the flexural behavior of precast reinforced concrete (RC) hollow slab beams in service for 15 years strengthened with UHPC. Among them, three hollow slab beams were strengthened with UHPC, and the interface treatment was chiseling, planting rebars, and a combination of chiseling and planting rebars, respectively. The remaining one without any strengthening treatment was used as the control specimen. To evaluate the enhancement effect of different interface treatments on UHPC-strengthened beams, the cracking load, ultimate load, crack development and failure modes of UHPC-strengthened beams were analyzed. Results indicated that the stiffness, deflection capacity and flexural capacity of UHPC-strengthened beams was significantly improved. Meanwhile, the stiffness of UHPC-strengthened beams in the pre-damage stage was increased by 49%–94%, when compared with the unstrengthened beam. Correspondingly, the ultimate flexural capacity was increased by 29%–38%. The interface chiseling treatment was more favorable to enhance the deformation capacity of UHPC-strengthened beams. The interface planting rebar treatment was more favorable to enhancing the ductility of UHPC-strengthened beams. The crack development was effectively suppressed by the interface chiseling and planting rebars together. This contributes to a higher load capacity reserve for UHPC-strengthened beams. The bearing capacity under serviceability limit state of the UHPC-strengthened beams was increased by 1.25, 2, and 2.5 times through the interface treatments of chiseling, planting rebars, and a combination of both, respectively.

Study on Flexural and Shear Behavior of UHPC Rhombus-Strip-Shaped Joint

Fatigue performance of a simply-supported T-beam UHPC bridge deck variable section joint structure

Experimental and numerical studies on shear behavior of prefabricated bridge deck slabs with compact UHPC wet joint

Flexural Performance of UHPC-Filled Narrow Joints Between Precast Concrete Bridge Slabs

Mechanical Behavior of Stud Shear Connectors Embedded in Hfrc

Flexural Behavior of Precast UHPC Segmental Beams with Unbonded Tendons and Epoxy Resin Joints

Experimental Study on Seismic Performance of Precast Pretensioned Prestressed Concrete Beam-Column Interior Joints Using UHPC for Connection

Cost-Effective UHPC for Accelerated Bridge Construction: Material Properties, Structural Elements, and Structural Applications

Bending performance of prefabricated ultra-thin UHPC unit plate reinforced orthotropic steel bridge decks

Flexural behavior of UHPC-filled longitudinal connections with non-contacting lap-spliced reinforcements for narrow joint width

Flexural behavior of wet joints in steel-UHPC composite deck slabs under hogging moment

Interfacial shear and flexural performances of steel-precast UHPC composite beams: Full-depth slabs with studs vs. demountable slabs with bolts

Numerical and Theoretical Investigation on Interfacial Shear Performance of Prefabricated Steel-Uhpc Composite Beams with Grouped Stud-Uhpc Pocket Connections

Experimental and analytical studies on direct shear performance of UHPC keyed joints

Experimental and numerical investigations on direct shear performance of UHPC dry joints

Experimental Study On Shear Behavior Of A Uhpc Connection Between Adjacent Precast Prestressed Concrete Voided Beams

Flexural Behavior and Model of Curved Bolt Connections with UHPC Grout and CFRP Tendons for Prefabricated Concrete Panels

Experimental study on flexural performance of composite slabs with bent bars and postcast ultrahigh‐performance concrete joints

Grouped rubber-sleeved studs–UHPC pocket connections in prefabricated steel–UHPC composite beams: Shear performance under monotonic and cyclic loadings

Experimental and numerical analysis on flexural behavior of improved U-bar joint details for accelerated bridge construction

Effect of interface treatment on the flexural performance of existing RC bridge beams strengthened with UHPC