Abstract:Using Ultra-High Toughness Cementitious Composite (UHTCC) to the wet joints of composite bridge decks (CBDs) is a new solution to the cracking issue under hogging moments. Interfacial treatments and reinforcement details play a critical role in enhancing the crack resistance performance of wet joints in CBDs, while the quantitative impact of these factors on wet joints utilizing UHTCC materials remains uncertain. In this study, three different wet joint interfacial treatments (surface roughening, smearing epoxy adhesive, applying both) were proposed and the crack resistance performance were investigated through hogging moment tests on CBDs. During the tests, failure modes, flexural capacity, deformation behavior, force mechanism, crack propagation process and strain development of the CBD specimens with different wet joint details were discussed. To investigate the crack resistance performance of different wet joint interfaces, theoretical model for calculating nominal UHTCC tensile stress considering steel/UHTCC interfacial slip was constructed. Subsequently, the development curves of maximum crack width with nominal UHTCC tensile stress at wet joint interfaces were plotted. Test results indicated that interfacial treatment methods exert a distinct influence on the crack resistance performance of wet joints in steel-UHTCC CBDs. For reinforcement-enhanced wet joints, wet joint interfaces can be treated only with surface roughening, and the crack resistance performance was comparable to that treated with the combination of surface roughening and epoxy adhesive. Wet joint interfaces treated with the combination of surface roughening and epoxy adhesive exhibit a smaller value and growth rate of maximum crack width compared to those treated only with epoxy adhesive, and the cracking stresses σ0.05, σ0.1, and σ0.2 at wet joint interfaces were improved by 41.1%, 35.7%, and 232.6%, respectively. The wet joint interfaces in conventional wet joints are recommended to be treated with a combination of surface roughening and epoxy adhesive, resulting in smaller growth rates of interfacial maximum crack width. Moreover, the cracking stresses σ0.1 and σ0.2 at these interfaces were respectively improved by 577.4% and 400% compared to those treated only with surface roughening.

Flexural behavior of wet joints in steel-UHPC composite deck slabs under hogging moment

Fatigue performance of a simply-supported T-beam UHPC bridge deck variable section joint structure

Tensile behavior of a prefabricated Steel–UHPC composite deck system with notched perfobond strips

Flexural performance of a prefabricated steel–UHPC composite deck under transverse hogging moment

Mechanical behavior of natural bonding interface in hollow steel-UHPC composite bridge deck

Experimental and numerical studies on shear behavior of prefabricated bridge deck slabs with compact UHPC wet joint

Full-scale Experimental Study on Continuous UHPC Slabs of Steel-Uhpc Composite Deck System

Cracking behavior of segmented-casting joint in steel-UHPC composite bridge deck system: Experiment and numerical simulation

Experimental study on flexural behavior of hollow steel-UHPC composite bridge deck

Experimental Study on Tensile Behavior of Wet Joints in A Prefabricated Composite Deck System Composed of Orthotropic Steel Deck and Ultrathin Reactive-Powder Concrete Layer

Experimental and Numerical Investigation on Mechanical Performance of Continuous Steel-Uhpc Composite Slabs

Flexural Behavior of Ultra-High Performance Concrete (UHPC) Deck with Joints subjected to an Improved Steel Wire Mesh (SWM) Treatment

Effect of Interfacial Treatments on Wet Joints Performance in Steel-Uhtcc Composite Bridge Decks

Flexural Performance and Design of Steel-UHTCC Composite Bridge Decks with Different Composite Degrees under Hogging Moments

Bending performance of prefabricated ultra-thin UHPC unit plate reinforced orthotropic steel bridge decks

Experimental study on flexural performance of composite slabs with bent bars and postcast ultrahigh‐performance concrete joints

Flexural Behavior of the Composite Girder of a Prestressed Segmental UHPC Channel and a Reinforced Conventional Concrete Deck

Full scale testing of ultra-high performance concrete closure joint for prefabricated full-depth precast concrete bridge deck panel system

Flexural behavior of novel profiled steel-UHTCC assembled composite bridge decks

Flexural behavior and crack width prediction of UHPC-steel strip composite decks under sagging moments

Numerical and experimental study of a segmentally prefabricated orthotropic steel–ultra-high-performance concrete composite deck for long-span cable-stayed bridges