Abstract:Boron nanowires (BNWs) may have potential applications as reinforcing materials because B fibers are widely known for their excellent mechanical performance. However until now, there have been only few reports on the mechanical properties of individual BNW, and in situ transmission electron microscopy (TEM) investigations shining a light on their fracture mechanism have not been performed. In this paper, we applied in situ high-resolution TEM (HRTEM) technique to study the mechanical properties of individual BNWs using three loading schemes. The mean fracture strength and the maximum strain of individual BNWs were measured to be 10.4 GPa and 4.1%, respectively, during the tensile tests. And the averaged Young's modulus was calculated to be 308.2 GPa under tensile and compression tests. Bending experiments for the first time performed on individual BNWs revealed that their maximum bending strain could reach 9.9% and their ultimate bending stress arrived at 36.2 GPa. These figures are much higher than those of Si and ZnO nanowires known for their high bending strength. Moreover, the BNWs exhibited very high specific fracture strength (3.9 (GPa·cm(3))/g) and specific elastic modulus (130.6 (GPa·cm(3))/g), which are several dozens of times larger compared to many nanostructures known for their superb mechanical behaviors. At last, the effect of surface oxide layer on the Young's modulus, fracture strength and maximum bending strength of individual BNWs was elucidated to extract their intrinsic mechanical parameters using calculated corrections. All experimental results suggest that the present BNW are a bright promise as lightweight reinforcing fillers.

Ductile amorphous boron nitride microribbons

Deformation Mechanisms of Diamond Nanothread-Based Nanofiber

Individual Boron Nanowire Has Ultra-High Specific Young's Modulus and Fracture Strength As Revealed by in Situ Transmission Electron Microscopy.

The Effects of Morphology and Temperature on the Tensile Characteristics of Carbon Nitride Nanothreads.

Structural Evaluation And Mechanical Property Of Boron Nitride Fibers During Melt-Drawn Fabrication Process

Effect of Grafted Amine Groups on In-Plane Tensile Properties and High Temperature Structural Stability of Borophene Nanoribbons

Deformation and Bifurcation Analysis of Boron-Nitride Nanotubes

Novel Boron Nitride Hollow Nanoribbons.

High-quality boron nitride nanoribbons: unzipping during nanotube synthesis.

A molecular dynamics investigation of the mechanical properties of graphene nanochains

Nanocrystallization Enabled Tensile Ductility of Co-Based Amorphous Microwires

Ductile behavior of a penta-boron nitride nanosheet triggered by structure transition for enhancing hydrogels

Mechanical Properties of Bamboo-Like Boron Nitride Nanotubes by in Situ TEM and MD Simulations: Strengthening Effect of Interlocked Joint Interfaces.

Prediction of three-dimensional stretchable boron nitride nanoribbons

Tensile Tests on Individual Multi-Walled Boron Nitride Nanotubes

Role of 1d Edge in the Elasticity and Fracture of h-BN doped Graphene Nanoribbons

Micromechanisms of Deformation and Fracture in Rapidly Solidified Ni3al Alloys

Recent Advances in Boron Nitride Nanotubes and Nanosheets

Mechanical Strength of Boron Nitride Nanotube-Polymer Interfaces

Nanoscale Bending of Multilayered Boron Nitride and Graphene Ribbons: Experiment and Objective Molecular Dynamics Calculations

Mitigating the Formation of Amorphous Shear Band in Boron Carbide