Abstract:Boron nanowires (BNWs) may have potential applications as reinforcing materials because B fibers are widely known for their excellent mechanical performance. However until now, there have been only few reports on the mechanical properties of individual BNW, and in situ transmission electron microscopy (TEM) investigations shining a light on their fracture mechanism have not been performed. In this paper, we applied in situ high-resolution TEM (HRTEM) technique to study the mechanical properties of individual BNWs using three loading schemes. The mean fracture strength and the maximum strain of individual BNWs were measured to be 10.4 GPa and 4.1%, respectively, during the tensile tests. And the averaged Young's modulus was calculated to be 308.2 GPa under tensile and compression tests. Bending experiments for the first time performed on individual BNWs revealed that their maximum bending strain could reach 9.9% and their ultimate bending stress arrived at 36.2 GPa. These figures are much higher than those of Si and ZnO nanowires known for their high bending strength. Moreover, the BNWs exhibited very high specific fracture strength (3.9 (GPa·cm(3))/g) and specific elastic modulus (130.6 (GPa·cm(3))/g), which are several dozens of times larger compared to many nanostructures known for their superb mechanical behaviors. At last, the effect of surface oxide layer on the Young's modulus, fracture strength and maximum bending strength of individual BNWs was elucidated to extract their intrinsic mechanical parameters using calculated corrections. All experimental results suggest that the present BNW are a bright promise as lightweight reinforcing fillers.

Tensile Tests on Individual Multi-Walled Boron Nitride Nanotubes

Tensile Properties of a Boron/nitrogen-Doped Carbon Nanotube–graphene Hybrid Structure

Coupled Thermomechanics Of Single-Wall Carbon Nanotubes

Carbon-nanotube-templated Carbon Nanofibers with Improved Mechanical Performance

In-Situ HR-TEM Characterizations on Individual Carbon Nanotubes During Its Manipulation, Deformation and Growth

Tensile Loading Of Double-Walled And Triple-Walled Carbon Nanotubes And Their Mechanical Properties

The Effects of Morphology and Temperature on the Tensile Characteristics of Carbon Nitride Nanothreads.

Deformation and Bifurcation Analysis of Boron-Nitride Nanotubes

Stiffness and Thickness of Boron-Nitride Nanotubes

Individual Boron Nanowire Has Ultra-High Specific Young's Modulus and Fracture Strength As Revealed by in Situ Transmission Electron Microscopy.

Mechanical Properties of Bamboo-Like Boron Nitride Nanotubes by in Situ TEM and MD Simulations: Strengthening Effect of Interlocked Joint Interfaces.

Revealing the Anomalous Tensile Properties of WS2 Nanotubes by in Situ Transmission Electron Microscopy.

Strength and Breaking Mechanism of Multiwalled Carbon Nanotubes Under Tensile Load

Recent Advances in Boron Nitride Nanotubes and Nanosheets

Continuum Modeling of Boron Nitride Nanotubes

Tensile Properties of Long Aligned Double-Walled Carbon Nanotube Strands

In situ study on bending modulus of Al2O3nanotubes prepared by atomic layer deposition

Nanobeam Mechanics: Elasticity, Strength, and Toughness of Nanorods and Nanotubes

In situ measurements on individual thin carbon nanotubes using nanomanipulators inside a scanning electron microscope

TEM Observations of Buckling and Fracture Modes for Compressed Thick Multiwall Carbon Nanotubes

Molecular dynamics simulation studies of mechanical properties of different carbon nanotube systems