Abstract:Advanced symmetric solid oxide fuel cells (SOFCs) with a reducible electrode were proposed. Specifically, La2NiO4 + La0.9Sr0.1Ga0.8Mg0.2O3-delta (LSGM) [or Sm0.2Ce0.8O1.9 (SDC)] composite electrodes were successfully fabricated by an infiltration method and tested for power generation. X-ray diffraction (XRD) results demonstrated there was no noticeable phase reaction between infiltrated La2NiO4 and LSGM (or SDC) scaffold, and scanning electron microscopy (SEM) analysis indicated that the La2NiO4 phase formed as nanoparticles that decorated the surface of the scaffold. Different from conventional symmetric SOFCs, the electrode material La2NiO4 of current cells was reduced under an anode atmosphere to form metallic nickel as a high active catalyst for fuel oxidation. After the reduction, the electrode morphology and geometric integrity were maintained for the infiltrated electrode. For thick electrolyte-supported symmetric SOFCs with infiltrated La2NiO4 electrodes, an attractive maximum power density of similar to 550 mW cm(-2) was achieved at 800 degrees C operating on hydrogen fuel, significantly higher than similar cells with stable perovskite oxide electrodes, as reported in the literature. It suggested that the unreduced and reduced La2NiO4 performed well as a cathode for the oxygen reduction reaction and as an anode for fuel electro-oxidation, respectively. In addition, a favorable operating stability was demonstrated for a symmetric SOFC with an infiltrated La2NiO4 electrode. It provides a new way for developing cost-effective SOFCs with huge application opportunities.

Impact of electrical conductivity and the electrochemical performance of La2NiO4+δ and La4Ni3O10±δ cathodes on symmetric cells for intermediate-temperature SOFCs

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

Electrochemical properties of La1.5Pr0.5Ni0.95−Cu Al0.05O4+ Ruddlesden-Popper phase as cathodes for intermediate-temperature solid oxide fuel cells

Preparation and Electrochemical Properties of La1.5Pr0.5NiO4 and La1.5Pr0.5Ni0.9Cu0.1O4 Cathode Materials for Intermediate-Temperature Solid Oxide Fuel Cells

Electrode redox properties of Ba 1−x La x FeO 3−δ as cobalt free cathode materials for intermediate-temperature SOFCs

Advanced Symmetric Solid Oxide Fuel Cell With An Infiltrated K2nif4-Type La2nio4 Electrode

CO2-tolerant and cobalt-free La4Ni3-xCuxO10±δ (x = 0, 0.3, 0.5 and 0.7) cathodes for intermediate-temperature solid oxide fuel cells

Enhanced Surface Exchange Activity and Electrode Performance of (la2−2xsr2x)(ni1−xmnx)o4+δ Cathode for Intermediate Temperature Solid Oxide Fuel Cells

Exploiting rare-earth-abundant layered perovskite cathodes of LnBa0.5Sr0.5Co1.5Fe0.5O5+δ (Ln=La and Nd) for SOFCs

Performance Evaluation of La0.4Sr0.6Co0.2Fe0.7Nb0.1O3−δ As Both Anode and Cathode Material in Solid Oxide Fuel Cells

Performance evaluation of highly active and novel La0.7Sr0.3Ti0.1Fe0.6Ni0.3O3-δ material both as cathode and anode for intermediate-temperature symmetrical solid oxide fuel cell

High Active Cathode for Doped Ceria Electrolyte in SOFC

Evaluation and Performance Optimization of Double-Perovskite LaSrCoTiO5+δ Cathode for Intermediate-Temperature Solid-Oxide Fuel Cells

The Investigation of Ag & LaCo0.6Ni0.4O3−δ Composites As Cathode Contact Material for Intermediate Temperature Solid Oxide Fuel Cells

Nb-doped La0.6Sr0.4FeO3−δ as an electrolyte for intermediate-temperature solid oxide fuel cells

A High Performance Ni-Free Redox Reversible Ceramic Anode R-La0.5Sr0.5Fe0.8Cu0.1Ti0.1O3-δ for Intermediate Temperature Solid Oxide Fuel Cells

A Ruddlesden–Popper Oxide As a Carbon Dioxide Tolerant Cathode for Solid Oxide Fuel Cells That Operate at Intermediate Temperatures

Development of La1.7Ca0.3Ni1−yCuyO4+δ Materials for Oxygen Permeation Membranes and Cathodes for Intermediate-Temperature Solid Oxide Fuel Cells

Improved Performance of a Symmetrical Solid Oxide Fuel Cell by Swapping the Roles of Doped Ceria and La0.6Sr1.4MnO4+δ in the Electrode

Fabrication and Performance of La, Co-Substituted SrTiO3 As Cathode Materials of Solid Oxide Fuel Cell

Electrochemical Characterization of LaBaCuCoO5+δ–Sm0.2Ce0.8O1.9 Composite Cathode for Intermediate-Temperature Solid Oxide Fuel Cells