Abstract:The magnitude of impact load is one main influence factor of polycrystalline diamond compact (PDC) bit impact damage when drilling in conglomerate formation. But there are many factors affecting the magnitude of impact load. To assess and mitigate these impacts, this paper establishes the discrete element model of PDC cutting‐broken conglomerate and analyzes the effects of cementation strength difference, gravel diameter, and cutting speed on impact load. This study can provide a theoretical basis for optimizing the design of a PDC bit suitable for conglomerate formation, so as to improve the rock breaking efficiency and service life of the PDC bit. It is well known that the magnitude of impact load is one main reason for polycrystalline diamond compact (PDC) cutter failure rapidly when drilling conglomerate formation. However, there are many factors affecting the magnitude of impact load. To assess and mitigate these impacts, the discrete element model of PDC cutting‐broken conglomerate has been established, and the influence law of cementation strength difference (CSD), gravel diameter, and cutting velocity on impact load and gravel fragmentation in the process of cutting broken conglomerate is performed. What is more, the laboratory experiment of rock cutting by different shaped PDC cutters under different CSD and gravel diameters has also been conducted, and the correctness of numerical simulation results is verified by laboratory experiment. Meanwhile, the cutting depth and impact load of different shape PDC cutters under different CSD and gravel diameters have been analyzed. First, the simulation results show that the stripping mode of gravel mainly occurs when the CSD is large, and the corresponding axial and tangential impact load (mean axial peak cutting force [MAPCF]/mean tangential peak cutting force [MTPCF]) is relatively small. As the decrease of CSD, the gravel will be directly broken and the magnitude of the MAPCF/MTPCF will gradually increase, and the probability of impact damage to the cutting cutter will incrementally increase. In addition, larger gravel diameter and cutting velocity will lead to larger MAPCF/MTPCF, and the mode of gravel fragmentation changes gradually from being stripped to being directly broken with the increase of gravel diameter. Second, the laboratory experiment results not only verify the correctness of the simulation results but also find that ridged diamond element cutter has the smallest impact load and the largest cutting depth under different CSD and gravel diameters. This paper can provide a theoretical foundation for the optimization of drilling parameters and PDC bit design in drilling conglomerate formation.

Influence mechanism of polycrystalline diamond compact bit temperature rise based on thermo-fluid–solid coupling

A New Strategy of Carbon Fiber Reinforced Plastic Drilling Evaluation Using Thermal Measurement

The Wear and Friction Characters of Polycrystalline Diamond under Wetting Conditions

Analysis of Drilling Failure in Soft and Hard Sandwiching of Coal Seam

Numerical Simulation of Rock Breaking by Diamond Particles Under Ultra Deep Drilling Conditions

Friction and wear of polycrystalline diamond in oil drilling: a review

Research on the Temperature Field Distribution Characteristics of Bottomhole PDC Bits during the Efficient Development of Unconventional Oil and Gas in Long Horizontal Wells

CFD modeling of the flow behavior around a PDC drill bit: effects of nano-enhanced drilling fluids on cutting transport and cooling efficiency

Modelling and Mechanical Characteristics of PDC Cutter-Rock Interaction by Combining Mixed Fragmentation Modes with Dynamic Rock Strength

Experiment Study on Hot-pressing Iron-based Impregnated Diamond Drilling Bit

Analytical model of modified diamond tools temperature by focused ion beam in dry diamond turning

Prediction and Analysis of PDC Bit Wear in Conglomerate Layer with Machine Learning and Finite-Element Method

DEM numerical investigation on the effect of back rake angle of PDC bit in drilling hard rock strata

A novel experimental setup for axial–torsional coupled vibration impact-assisted PDC drill bit drilling

Prediction of formation abrasiveness under the action of a PDC bit based on the fractal dimension of a rock surface

Intense Cooling during Composite Rock Breaking of High-Pressure CO2 Jet-Polycrystalline Diamond Cutter

Issues in Polycrystalline Diamond Compact Cutter–Rock Interaction From a Metal Machining Point of View—Part II: Bit Performance and Rock Cutting Mechanics

Assessing the Efficiency of Carbide Drill Bits and Factors Influencing Their Application to Debris-Rich Subglacial Ice

A Study on Drilling High-Strength CFRP Laminates: Frictional Heat and Cutting Temperature

Analysis of Rock Dynamic Stresses During the Drilling by Polycrystalline Diamond Compact Bits

Analysis of PDC cutter cutting‐broken conglomerate based on the discrete element method