Abstract:Sulfide-based all-solid-state Li-ion batteries (ASSLIBs) are recognized as promising next-generation batteries, due to its advantage of high energy density, high safety and high Li+ diffusivity in sulfide solid electrolytes (SEs). However, interfacial instability between cathode (like LiCoO2) and sulfide SEs hinders its commercial applica-tions. Herein, a simple mechanochemical strategy, which mechanically mixed polyanionic borate precursor and Li2CO3 residue on LiCoO2 (LCO) cathode with subsequent thermochemical reactions, was proposed to achieve analogous "solid electrolyte interphase (SEI)" to address such issues. The artificial SEI consists of crystalline LiBa (B3O5)3 (LBBO), Li3BO3 (LBO) and amorphous lithium boron oxide (Li-B-O). Therein, the former two endow high interfacial stability with SEs and ionic conductivity respectively, while the latter presented in the former interspace isolated the LCO cathode from Li10GeP2S12 (LGPS) solid electrolyte and constructed a continuous interlayer with LBBO and LBO. According to the phase diagram and direct observation through TEM, it is confirmed that a suitable ratio of raw LBBO precursor and Li2CO3 residue can realize an appropriate proportion of LBO to balance the interfacial stability and the diffusion of Li+ in obtained artificial interlayer, which enables high cyclability and rate performance in LCO/LGPS/Li-In ASSLIBs. Specifically, SEI with 9.4 mol.% LBO boosts an initial discharge capacity of 153.8 mAh g+1 (2.6-4.3 V (vs. Li/Li+), 0.1 C) with 74.4 % retention (150 cycles) and an excellent rate capability of 92.9 and 56.1 mAh g+1 at 1 C and 2 C respectively. Upon increased cut-off voltage of 4.5 V, an initial 167.3 mAh g+1 capacity (0.2 C) and 64.7 % retention (150 cycles) can also be ach-ieved. The present strategy utilizing mechanochemical reactions between polyanionic borate and Li2CO3 residue to construct analogous SEI will offer fresh insights to stabilize the electrode/electrolyte interface of ASSLIBs derived from diverse polyanionic-type borates or phosphates, which can be widely used in other all-solid-state batteries with various cathodes and electrolytes.

Self‐Sacrificing Reductive Interphase for Robust and High‐Performance Sulfide‐Based All‐Solid‐State Lithium Batteries

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Reducing Gases Triggered Cathode Surface Reconstruction for Stable Cathode‐Electrolyte Interface in Practical All‐Solid‐State Lithium Batteries

Mechanochemical Reactions Between Polyanionic Borate and Residue Li2CO3 on LiCoO2 to Stabilize Cathode/electrolyte Interface in Sulfide-Based All-Solid-state Batteries

Surface Engineering Strategy Enables 4.5 V Sulfide-Based All-Solid-State Batteries with High Cathode Loading and Long Cycle Life

"Win‐Win" Modification of LiCoO2 Enables Stable and Long‐Life Cycling of Sulfide‐Based All Solid‐State Batteries

Surface Reconstruction Layer Boosting Interfacial Stability of LiCoO2/Li6PS5Cl in Bulk All-Solid-State Li Batteries

Glassy/Ceramic Li2TiO3/LixByOz Analogous “solid Electrolyte Interphase” to Boost 4.5 V LiCoO2 in Sulfide‐Based All‐Solid‐State Batteries

Dual-functional interfaces for highly stable Ni-rich layered cathodes in sulfide all-solid-state batteries

Interface Engineering of Sulfide Electrolytes for All-Solid-state Lithium Batteries

All-Solid-State Lithium-Sulfur Batteries of High Cycling Stability and Rate Capability Enabled by a Self-Lithiated Sn-C Interlayer

A robust solid electrolyte interphase enabled by solvate ionic liquid for high-performance sulfide-based all-solid-state lithium metal batteries

Glassy/Ceramic Li<sub>2</sub>TiO<sub>3</sub>/Li<sub>x</sub>B<sub>y</sub>O<sub>z</sub> Analogous "Solid Electrolyte Interphase" to Boost 4.5 V LiCoO<sub>2</sub> in Sulfide-Based All-Solid-State Batteries

Interficial Engineering of Lithium Metal Anode for Sulfide Solid State Batteries

SnF2-Catalyzed Lithiophilic-Lithiophobic Gradient Interface for High-Rate PEO-Based All-Solid-State Batteries

Boosting the Interfacial Stability of the Li6PS5Cl Electrolyte with a Li Anode via In Situ Formation of a LiF-Rich SEI Layer and a Ductile Sulfide Composite Solid Electrolyte

Lithium Dendrite Suppression and Enhanced Interfacial Compatibility Enabled by an Ex Situ SEI on Li Anode for LAGP-Based All-Solid-State Batteries

Constructing Stable Anodic Interphase for Quasi-Solid-State Lithium–Sulfur Batteries

Enabling high-performance all-solid-state lithium batteries with high ionic conductive sulfide-based composite solid electrolyte and ex-situ artificial SEI film

Bidirectionally Compatible Buffering Layer Enables Highly Stable and Conductive Interface for 4.5 V Sulfide‐Based All‐Solid‐State Lithium Batteries

An optimizing hybrid interface architecture for unleashing the potential of sulfide-based all-solid-state battery