Abstract:This paper presents large‐scale quasi‐static tests conducted to investigate the seismic behavior of slender T‐shaped walls under a high axial compression force ratio of approximately 0.19. Four specimens were designed per various codes and design methods for comparison. All specimens failed in a flexural mode, characterized by the crushing of concrete and buckling or fracture of boundary longitudinal rebars at the web toe. The specimens designed per the US code ACI 318‐19 provisions and designed using displacement‐based method exhibited satisfactory deformation capacity with an ultimate drift exceeding 2.0%, which validates the effectiveness of the provisions and displacement‐based method for T‐shaped walls under high axial force ratios. However, the specimen designed per the Chinese code GB 50011‐2010 experienced a sudden drop in strength after 1.0% drift in flange‐in‐tension loading, indicating insufficient design of the special boundary element at the web toe and the necessity of improvement of the current Chinese code provisions. The flexural strength of the T‐shaped wall specimens can be accurately estimated using cross‐sectional analysis. Analysis of the test data indicated that the effective stiffness of the T‐shaped RC walls with an axial force ratio of no greater than 0.1 was significantly lower than 0.35EcIg, while that of the T‐shaped walls with an axial force ratio of 0.19 reached 0.5–0.7EcIg. Existing equations did not provide accurate estimate of the effective stiffness of T‐shaped walls. The lateral drift limit formulation developed by Segura and Wallace could reasonably estimate the lateral drift capacities for the T‐shaped RC wall specimens under high axial force ratios. Finally, three conceptually different models, namely the MVLEM‐3D, SFI‐MVLEM‐3D, and multi‐layer shear element models were adopted for the simulation of T‐shaped RC walls. All three models reasonably predicted the flexural strength capacity (mostly less than 15% error) and the effective stiffness (13%–43% error) of the T‐shaped walls.

Seismic behavior and modeling of T‐shaped reinforced concrete walls under high axial force ratios

Seismic Performance of Reinforced Concrete Squat Walls with Embedded Cold-Formed and Thin Walled Steel Truss

Seismic behavior of high strength concrete composite walls with embedded steel truss

Experimental study and numerical simulation of seismic performance of stiffened thin steel plate shear walls considering the effect of vertical load on frame column

Coupled Axial Tension-Shear Behavior of Reinforced Concrete Walls

Experimental Study of Shear-Critical Reinforced-Concrete Shear Walls under Tension-Bending Shear-Combined Cyclic Load

Shear behavior of reinforced concrete walls under variable axial tension‐compression and cyclic lateral loads

Seismic behavior of reinforced concrete slender walls subjected to variable axial loads

Theoretical Method for Predicting the Failure Mode of Reinforced Concrete Shear Walls Subjected to Axial Tension and Cyclic Lateral Loads

Seismic behavior of reinforced concrete shear walls subjected to high axial loading

Seismic Behavior of Slender Prestressed Reinforced Concrete Short-Leg Walls

Cyclic shear behavior and strength capacity of prestressed concrete walls in high-rise buildings

Seismic Behavior and Modeling of Steel Reinforced Concrete (SRC) Walls

Behavior of Steel Tube-Reinforced Concrete Composite Walls Subjected to High Axial Force and Cyclic Loading

Experimental investigation and numerical modelling of the seismic performance of corroded T-shaped reinforced concrete shear walls

New OpenSees Material Model for Simulating Reinforced Concrete Shear Walls Subjected to Coupled Axial Tension and Cyclic Lateral Loads

Seismic behavior of composite shear walls incorporating high-strength materials and CFST boundary elements

Seismic Behavior of Steel Plate Reinforced Concrete Composite Shear Walls under Tension-Bending-Shear Combined Cyclic Load

Numerical Study of Reinforced Concrete Coupled Shear Walls Based on a Two-Dimensional Finite Element Model

Experimental Study on Seismic Behavior of Steel Plate Reinforced Concrete Composite Shear Walls with Square CFST Concealed Columns

Biaxial Constitutive Models for Simulation of Low-Aspect-Ratio Reinforced Concrete Shear Walls