Abstract:The lateral bearing performance of a defective pile-supported wharf located on a slope was investigated through centrifuge modeling, and a numerical model was employed to back-analyze the centrifuge test data. The pile foundation system was composed of double-plumb, single-plumb, and batter piles, and the defects were located at the front row of the double-plumb piles. The failure mode, bearing lateral load, bent displacement, and pile bending moments were examined. The results show that overturning with slight torsion occurred in the bent under the lateral load. The piles clearly deformed around defects and were separated from the soil on the landside. The lateral bent displacement increased rapidly after a threshold lateral load value was reached. The bending moments were generally positive (i.e., the side facing the water was in tension) in the upper parts and negative in the lower parts of the double-plumb piles. The bending moments of the double-plumb pile heads increased with the lateral load, whereas the bending moments directly underneath the slope surface exhibited decreasing-constant tendencies with increasing lateral load. The bending moment of the single-plumb pile was generally positive above the slope surface and in compression below the slope surface, and decreasing-constant tendencies were observed with increasing lateral load just below the slope surface. The bending moment of the forward batter pile was negative and decreased with the lateral load around the slope surface and in the middle of the soil. The bending moment of the backward batter pile was generally positive above the slope surface, negative below the slope surface, and remained almost constant around the soil.

The influence of distant surcharge load with a finite length on the cantilever walls

Large Deformation Analysis of Intermittent Pile Penetration into Dense Sand Incorporating a State Dependent Mohr–Coulomb Model

Large-Deformation Finite-Element Simulation of Deformation and Strain Fields Resulting from Closed-End Displacement Pile Installation in Sand

Lateral Bearing Performance of a Defective Pile-Supported Wharf with Batter Piles

STUDY ON PILE LONGITUDINAL VIBRATION CONSIDERING EFFECT OF UNDERGROUND WATER LEVEL

Large Deformation Finite-Element Simulation of Displacement-Pile Installation Experiments in Sand

Effect of Loading Rate on Lateral Pile-Soil Interaction in Sand Considering Partially Drained Condition

Analytical Elastoplastic Solutions of Laterally Loaded Long Piles

Centrifuge Model Tests on Laterally Loaded Piles in Sand

Displacement and Force Analyses of Braced Structure of Deep Excavation Considering Unsymmetrical Surcharge Effect

Influence of the Penetration of Adjacent X-section Cast-in-place Concrete (XCC) Pile on the Existing XCC Pile in Sand

Influence Of Excavation Unloading On Vertical Bearing Behavior Of Existing Pile Groups

FEM Analysis and Simplified Approach for a Single Energy Pile Subjected to Thermomechanical Loads

A P-Y Curve Method for Horizontal Bearing Characteristics of Single Batter Pile in Sands

Behavior Analysis of Laterally Loaded Single Pile under Large Deflection

Centrifuge Testing and Numerical Modeling of Single Pile and Long-Pile Groups Adjacent to Surcharge Loads in Silt Soil

Displacement and Force Analyses of Piles in the Pile-Caisson Composite Structure under Eccentric Inclined Loading Considering Different Stratum Features

Study on Negative Friction Characteristic of Row Piles Subjected to Surcharge Nearby

Analytical method for lateral capacity of pile foundations under vertical loads considering asymmetric scour hole in sand

MPM Simulation of the Installation of an Impact-Driven Pile in Dry Sand and Subsequent Axial Bearing Capacity

The influences of vertical load on lateral dynamic responses of end-bearing friction pile