Material characterization of iron-based shape memory alloys for use in self-centering columns
Huanpeng Hong,Bora Gencturk,Mehdi Saiid Saiidi
DOI: https://doi.org/10.1088/1361-665x/ad4d5f
IF: 4.1
2024-05-20
Smart Materials and Structures
Abstract:Iron-based shape memory alloys (FeSMA) are emerging as promising materials for use in post-tensioning concrete structures to provide self-centering capabilities during a seismic event. Past experimental studies on FeSMA focused on strengthening or repairing existing structural components. In addition to the structural rehabilitation for gravity loading, FeSMA also have potential for use in self-centering columns subjected to seismic loads. However, the basic material properties, such as strength, ductility, recovery strain, actuation stress (i.e., prestress) stability, low-cycle fatigue resistance, and temperature dependence of FeSMA related to self-centering column applications have not been studied so far. To fill this knowledge gap and determine the feasibility of using FeSMA in self-centering columns, this study performed a comprehensive characterization and analysis of FeSMA both before and after actuation (i.e., thermal stimulation). The strength, ductility, and recovery strain of FeSMA before actuation were tested at different temperatures from -40°C to 50°C. After actuation, the actuation stress, low-cycle fatigue resistance, and strain capacity of FeSMA were tested at different temperatures from -40°C to 50°C, prestrain levels from 4% to 30%, and under low-cycle fatigue loading with strain amplitudes from 0.5% to 1.0%. The results from this study demonstrated that FeSMA exhibit high ductility, cyclic actuation stress stability, and low-cycle fatigue resistance at temperatures from -40°C to 50°C. Furthermore, it was found that increasing the prestrain level can effectively increase the post-actuation strain amplitude at which the actuation stress reduces to zero. A prestrain level between 15% and 20% is recommended for application of FeSMA in self-centering columns. The research findings from this study demonstrated the feasibility of using FeSMA in self-centering columns subject to seismic loading.
materials science, multidisciplinary,instruments & instrumentation