Abstract:The mechanical properties of dissimilar metal-welded joint materials are heterogeneous, which is an obstacle to the safety evaluation of key welded structures. The variation of stress–strain conditions at the crack tip caused by mismatch of material mechanical properties in dissimilar metal-welded joints is an important factor affecting crack propagation behavior. To understand the influence of uneven distribution of ultimate strength of the base metal and the welded metal on the crack propagation path, fracture toughness, as well as the mechanical field at the crack tip in the small-scale yield range, the user-defined field variable subroutine method is used to express continuous variation characteristics of welded joint ultimate strength in finite element software. In addition, the J-integral during crack propagation is calculated, and the effect of the ultimate strength on the J-integral and the stress field at the crack tip are analyzed. The results show that as the crack propagation direction is perpendicular to the direction of ultimate strength, the gradient of ultimate strength increases from |Gy|= 50 to |Gy|= 100 MPa/mm, the crack deflection angle increases by 0.018%, and the crack length increases by 1.46%. The fracture toughness of the material decreased slightly during crack propagation. Under the condition that the crack propagation direction is the same as the direction of ultimate strength, the crack propagation path is a straight line. As the gradient of ultimate strength increases from Gx = 50 to Gx = 100 MPa/mm, the crack propagation length decreases by 5.17%, and the slope of fracture toughness curve increases by 51.63%. On the contrary, as the crack propagates to the low ultimate strength side, the crack propagation resistance decreases, the ultimate strength gradient increases from Gx = −100 to Gx = −50 MPa/mm, and the slope of the fracture toughness curve decreases by 51.01%. It is suggested to consider the relationship between crack growth behavior and ultimate strength when designing and evaluating the structural integrity of cracks at the material interface of dissimilar metal-welded joints.

Characterization of heterogeneous mechanical properties for thick welded joints with flow stress variation in the transverse and thickness directions

Characterization of Mechanical Heterogeneity in Dissimilar Metal Welded Joints

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

Analytical Model for Three-Dimensional Non-Uniform Temperature Field and Welding Stress of Thick Plates Via Friction Stir Weld

Three-dimensional Analytical Model for Residual Stress in the Weld of Thick Plates by Friction Stir Welding

Numerical Investigation of the Influence of Ultimate-Strength Heterogeneity on Crack Propagation and Fracture Toughness in Welded Joints

Numerical and experimental study on thermal-metallurgical-mechanical behavior of high-strength steel welded joint

Semi-analytical Model for Material Flow Behavior in Thick Plates Via Friction Stir Welding

Effect of Inhomogeneous Mechanical Properties on the Stress-Strain Field at the Crack Tip and Crack Growth Direction in Dissimilar Metal Welded Joints

The Development of a Continuous Constitutive Model for Thin-Shell Components with A Sharp Change in the Property at Welded Joints

Thermal-mechano-metallurgical coupled analysis of welding residual stress

Experimental Investigation of Fatigue Behaviour for Welded Joint with Mechanical Heterogeneity

Fracture prediction in transverse fillet welded joints of high strength structural steel

Influence of Material Model on Prediction Accuracy of Welding Residual Stress in an Austenitic Stainless Steel Multi-pass Butt-Welded Joint

Effect of microstructure heterogeneity on the mechanical properties of friction stir welded reduced activation ferritic/martensitic steel

Solid phase transformation effects on stress and strain in the thick plate EH40 welded butt joint

Effect of Mechanical Heterogeneity on Strain and Stress Fields at Crack Tips of SCC in Dissimilar Metal Welded Joints

Mechanical Characteristic and Stress-Strain Modelling of Friction Stir Welded 6061-T6 Aluminium Alloy Butt Joints

Accurate evaluation on residual stress considering solid-state phase transformation and initial stress in thick weld

Tensile Properties and Their Heterogeneity in Friction Stir Welded Joints of a Strain Hardened Aluminum Alloy(Materials, Metallurgy & Weldability)

A physically consistent 2D residual stress model for approximating 3D effects in welding