Abstract:Molten salt reactors have gained substantial interest in the last years due to their flexibility and their potential for simplified closed fuel cycle operation for massive expansion in low-carbon electricity production, which will be required for a future net-zero society. The importance of a zero-power reactor for the process of developing a new, innovative rector concept, such as that required for the molten salt fast reactor based on iMAGINE technology, which operates directly on spent nuclear fuel, is described here. It is based on historical developments as well as the current demand for experimental results and key factors that are relevant to the success of the next step in the development process of all innovative reactor types. In the systematic modelling and simulation of a zero-power molten salt reactor, the radius and the feedback effects are studied for a eutectic based system, while a heavy metal rich chloride-based system are studied depending on the uranium enrichment accompanied with the effects on neutron flux spectrum and spatial distribution. These results are used to support the relevant decision for the narrowing down of the configurations supported by considerations on cost and proliferation for the follow up 3-D analysis. The results provide for the first time a systematic modelling and simulation approach for a new reactor physics experiment for an advanced technology. The expected core volumes for these configurations have been studied using multi-group and continuous energy Monte-Carlo simulations identifying the 35% enriched systems as the most attractive. This finally leads to the choice of heavy metal rich compositions with 35% enrichment as the reference system for future studies of the next steps in the zero power reactor investigation. An alternative could be the eutectic system in the case the increased core diameter is manageable. The inter-comparison of the different applied codes and approaches available in the SCALE package has delivered a very good agreement between the results, creating trust into the developed and used models and methods.

Request for 35Cl(n,p) reaction cross-section measurements and re-evaluations from the standpoint of molten chloride salt fast reactor design

Reactivity Impact of Updated 35Cl Nuclear Data on the Molten Chloride Reactor Experiment

Measurement of the energy-differential cross section via the ratio with

Improved modeling of neutron-induced reactions on chlorine isotopes aided through new and measurements at LANSCE

Cross sections for the <SUP>35</SUP>Cl(n, ) <SUP>32</SUP>P reaction in the 3.3-5.3 MeV neutron energy region

Preliminary Study on the Candidate Fuel Salt of Molten Chloride Salt Fast Reactor

Cross sections for the reaction in the 3.3–5.3 MeV neutron energy region

Neutronics and thermal-hydraulics coupling analyses on transient and accident behaviors of molten chloride salt fast reactor

Neutron-Physical and Radiation Characteristics of Different Low Enrichment Fuels (Thorium and Uranium) in a Proposed JRTR Research Reactor

Thermal properties of binary chlorides relevant to molten salt chemistry

Studies on Flibe Blanket Designs in Helical Reactor FFHR

A new methodology for measuring the enthalpies of mixing and heat capacities of molten chloride salts using high temperature drop calorimetry

Effect of reprocessing on neutrons of a molten chloride salt fast reactor

Scoping Studies of Reactor Core Parameters in Support of the Abilene Christian University Molten Salt Research Reactor

Development of Two-Step Method for Fast Chloride MSR Neutronics

Ab-Initio molecular dynamics simulations of binary NaCl-ThCl4 and ternary NaCl-ThCl4-UCl3 molten salts

Experimental and numerical thermal-hydraulics investigation of a molten salt reactor concept core

Electrochemical and spectroscopic study on corrosion behavior of Ni-based alloys in chloride melts: Materials for an integral molten salt fast reactor

Comparison and sensitivity analysis of the core characteristics of a sodium-cooled fast breeder reactor with 750 MWe output evaluated by JENDL-4.0 and ADJ2000R

Measurement of neutron-induced fission cross sections of 232Th from 1 to 300 MeV at CSNS Back-n

On the Dimensions Required for a Molten Salt Zero Power Reactor Operating on Chloride Salts