Abstract:The use of the F-19 isotope in the nuclear fuel cycle is already well established for fuel enrichment, but future plans for Gen-IV reactors, such as Molten Salt Reactors, could utilize a fluorine-based salt as a basis for the fuel. It is therefore imperative that an understanding of the characteristics of F-19 is instituted, and one component of key interest is the quantification of reactor parameter uncertainties that arise from the uncertainties in the nuclear data. The results from such analyses can shed light on where experimentalists need to further improve nuclear data for F-19, as well as yielding critical information for developing and optimizing reactor designs thanks to greater knowledge of the uncertainties that result from nuclear data.In this work, we analysed a molten salt reactor based on the designs made by Transatomic Power. We conducted uncertainty quantification on three reactor operating modes: thermal, semi-epithermal, and epithermal. In the epithermal mode, the neutron spectrum is faster than in the thermal mode because fewer moderator rods are used. We generated nuclear data that was sampled from the covariance matrices in the JEFF-3.3 nuclear data library using SANDY[1] and NJOY. By utilising the Total Monte Carlo approach, we propagated the uncertainties from the samples to uncertainties in the neutron multiplication by simulating the reactor in OpenMC, a Monte Carlo-based neutron transport code. By perturbing individual reaction channels while keeping others constant, it was possible to quantify the amount of contribution each single reaction channel has to the overall uncertainty.For the thermal reactor, the F-19 data sampling resulted in an uncertainty in reactivity of 62 pcm. The main contributors to the reactivity uncertainty for the thermal reactor are elastic scattering, neutron capture and alpha production. The epithermal reactor, with a reactivity uncertainty of 213 pcm, is mostly affected by elastic scattering, inelastic scattering, and alpha production. The alpha production channel had an unexpectedly large contribution, and it should be investigated further. The results should be considered preliminary. Quantitatively, we observe that scattering plays a bigger role for the uncertainty in the epithermal system, a phenomenon which could be explained by the fact that with less moderation in the form of moderator rods, the role of F-19 in slowing down neutrons is greater, and hence its contribution to the uncertainty is greater.

Reactivity Impact of Updated 35Cl Nuclear Data on the Molten Chloride Reactor Experiment

Improved modeling of neutron-induced reactions on chlorine isotopes aided through new and measurements at LANSCE

Request for 35Cl(n,p) reaction cross-section measurements and re-evaluations from the standpoint of molten chloride salt fast reactor design

Measurement of the energy-differential cross section via the ratio with

Modeling of the Molten Salt Reactor Experiment with SCALE

Reactor Physics Benchmark of the First Criticality in the Molten Salt Reactor Experiment

Applications of Thermochemical Modeling in Molten Salt Reactors

Neutron cross section measurements for BUC approaches

A new methodology for measuring the enthalpies of mixing and heat capacities of molten chloride salts using high temperature drop calorimetry

Thermal properties of binary chlorides relevant to molten salt chemistry

Effect of reprocessing on neutrons of a molten chloride salt fast reactor

Nuclear Data Uncertainty Quantification for Reactor Physics Parameters in Fluorine-19-based Molten Salt Reactors

Scoping Studies of Reactor Core Parameters in Support of the Abilene Christian University Molten Salt Research Reactor

Development of Two-Step Method for Fast Chloride MSR Neutronics

An Analysis of Transport Effects in Steady-State Simulation of the Molten Salt Reactor Experiment

Preliminary Study on the Candidate Fuel Salt of Molten Chloride Salt Fast Reactor

The importance of delayed neutron precursors in gamma dose calculations for activated primary heat exchanger components in the Molten Salt Breeder Reactor

Cross sections for the reaction in the 3.3–5.3 MeV neutron energy region

Uncertainty reduction of sodium void reactivity using data from a sodium shielding experiment

Nuclear Data Uncertainty Propagation for the Molten Salt Fast Reactor Design

Monte Carlo Perturbation Analysis of Fuel Temperature Variations in the MCNP Model of the Annular Core Research Reactor