Abstract:Chemical dopants are often required in organic hole transport materials (HTMs) to enhance the film conductivity and power conversion efficiency (PCE) of solar cells. Although additives (LiTFSI + tBP) and oxidants (FK209) are key dopants in HTMs, their hygroscopic and volatile nature induce severe morphology change, ion accumulation, as well as perovskite corrosion, which significantly hinder PSC stability. Various dopant structures and compositions have been developed, but challenges remain in fundamentally understanding their complementary effects and individual roles of additives and oxidants in PSCs. In this study, dopants with different configurations were investigated thoroughly toward optimizing the device efficiency and stability. The results show that the additives LiTFSI + tBP play more essential roles in enhancing the spiro-OMeTAD (Spiro) conductivity and device efficiency, even though the oxidant FK209 produces more Spiro+ cations. Consequently, the cooperative effects of additives and oxidants enable the highest conductivity (2 × 10–5 S cm–1) and a PCE of over 21% compared to their individual counterparts. The additives LiTFSI + tBP exhibit deleterious influences on film stability under different environmental conditions, whereas FK209-only devices significantly alleviate these negative effects on device stability, meanwhile achieving a satisfied conductivity (5 × 10–6 S cm–1) and a high PCE of 19.6%. Besides, unencapsulated FK209 devices exhibit remarkable environmental and operational stability. Our work provides new insights into understanding dopants' roles in charge conduction and offers new doping approaches for organic semiconductors.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c04097.Details of device fabrication and characterization procedures; UV–vis absorption and device performance; space-charge-limited current curves; and SEM and contact angles of the films (PDF)This article has not yet been cited by other publications.

Evaporated Undoped Spiro‐OMeTAD Enables Stable Perovskite Solar Cells Exceeding 20% Efficiency (Adv. Energy Mater. 22/2022)

Metal Organic Framework Doped Spiro-OMeTAD with Increased Conductivity for Improving Perovskite Solar Cell Performance

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Dopant-free Spiro-OMeTAD As Hole Transporting Layer for Stable and Efficient Perovskite Solar Cells

Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss

Perovskite solar cells based on spiro-OMeTAD stabilized with an alkylthiol additive

Ion-Migration Inhibitor for Spiro-OMeTAD/Perovskite Contact Toward Stable Perovskite Solar Cells

Sequential Molecule‐Doped Hole Conductor to Achieve >23% Perovskite Solar Cells with 3000‐hour Operational Stability

Efficient and Stable of Perovskite Solar Cells

Iodide-Reduced Graphene Oxide With Dopant-Free Spiro-Ometad For Ambient Stable And High-Efficiency Perovskite Solar Cells

Self-Assembled Molecules for Hole-Selective Electrodes in Highly Stable and Efficient Inverted Perovskite Solar Cells with Ultralow Energy Loss

Self‐polymerized Spiro‐Type Interfacial Molecule toward Efficient and Stable Perovskite Solar Cells

Unveiling the Critical Role of Oxidants and Additives in Doped Spiro-OMeTAD toward Stable and Efficient Perovskite Solar Cells

Molecular engineering of highly efficient dopant-free spiro-type hole transporting materials for perovskite solar cells

Ion-modulated radical doping of spiro-OMeTAD for more efficient and stable perovskite solar cells

raphene oxide with dopant-free spiro-OMeTAD for ambient stable and high-e ffi ciency perovskite solar cells †

Durable Perovskite Solar Cells with 24.5% Average Efficiency: the Role of Rigid Conjugated Core in Molecular Semiconductors

A Bifunctional Saddle‐Shaped Small Molecule As a Dopant‐Free Hole Transporting Material and Interfacial Layer for Efficient and Stable Perovskite Solar Cells (solar RRL 5∕2019)

Dimensional Tuning of Perylene Diimide‐Based Polymers for Perovskite Solar Cells with Over 24% Efficiency

Solution-Processed Cu9S5 As a Hole Transport Layer for Efficient and Stable Perovskite Solar Cells.

Heteroatom engineering on spiro-type hole transporting materials for perovskite solar cells