Abstract:Good selective contacts are necessary for solar cells that are efficient and have long-term stability. Since 1998, with the advent of solid-state dye sensitized solar cells (DSSC), Spiro-OMeTAD has become the reference hole-transporting material. Yet, for efficient solar cells Spiro-OMeTAD must be partially oxidized with chemical dopants, which compromises the long-term stability of the solar cell. Alternatively, semiconductor polymers such as PTAA have been also studied, matching or improving the solar cell characteristics. However, PTAA-based devices lack long-term stability. Moreover, both Spiro-OMeTAD and PTAA are expensive materials to synthesize. Hence, approaches toward increasing the solar cell stability without compromising the device efficiency and decreasing the manufacturing cost are very desirable. In this work we have modified Spiro-OMeTAD, by an easy-to-use methodology, by introducing a carboxylic acid anchoring group (Spiro-Acid), thereby allowing the formation of self-assembled monolayers (SAMs) of the hole-transporting material in dopant-free p-i-n hybrid perovskite solar cells (iPSCs). The resulting device showed a champion efficiency of 18.15% with ultralow energy loss, which is the highest efficiency among Spiro-OMeTAD-based iPSCs, and a remarkable fill factor of over 82%, as well as excellent long-term illumination stability. Charge transfer and charge carrier dynamics are studied by using advanced transient techniques to understand the interfacial kinetics. Our results demonstrate that the Spiro-OMeTAD-based SAMs have a great potential in producing low-cost iPSC devices, due to lower material usage, good long-term stability, and high performance.

Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss

Metal Organic Framework Doped Spiro-OMeTAD with Increased Conductivity for Improving Perovskite Solar Cell Performance

Dopant-free Spiro-OMeTAD As Hole Transporting Layer for Stable and Efficient Perovskite Solar Cells

Ion-Migration Inhibitor for Spiro-OMeTAD/Perovskite Contact Toward Stable Perovskite Solar Cells

Self‐polymerized Spiro‐Type Interfacial Molecule toward Efficient and Stable Perovskite Solar Cells

Efficient and Stable Perovskite Solar Cells with a Multifunctional Spiro‐Based Hole Transport Material

Realizing Stable Perovskite Solar Cells with Efficiency Exceeding 25.6% Through Crystallization Kinetics and Spatial Orientation Regulation

Perovskite solar cells based on spiro-OMeTAD stabilized with an alkylthiol additive

Evaporated Undoped Spiro‐OMeTAD Enables Stable Perovskite Solar Cells Exceeding 20% Efficiency (Adv. Energy Mater. 22/2022)

Perovskite Solar Cells Employing a PbSO4(PbO)4 Quantum Dot-Doped Spiro-OMeTAD Hole Transport Layer with an Efficiency over 22

Self-Assembled Molecules for Hole-Selective Electrodes in Highly Stable and Efficient Inverted Perovskite Solar Cells with Ultralow Energy Loss

Sequential Molecule‐Doped Hole Conductor to Achieve >23% Perovskite Solar Cells with 3000‐hour Operational Stability

A spiro-OMeTAD based semiconductor composite with over 100 °C glass transition temperature for durable perovskite solar cells

Efficient and Stable Perovskite Solar Cell with High Open-Circuit Voltage by Dimensional Interface Modification

Iodide-Reduced Graphene Oxide With Dopant-Free Spiro-Ometad For Ambient Stable And High-Efficiency Perovskite Solar Cells

Large-area perovskite solar cells employing spiro-Naph hole transport material

A Trifluoroethoxyl Functionalized Spiro‐Based Hole‐Transporting Material for Highly Efficient and Stable Perovskite Solar Cells

A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells

Tert-butyl peroxybenzoate-doped spiro-OMeTAD for perovskite solar cells with efficiency over 23%

Stabilizing Perovskite Solar Cells Based on 2,2′,7,7′‐Tetrakis(N,N‐DI‐P‐Methoxyphenylamine)‐9,9′‐Spirobifluoren with Perfluoropolyethers

Binary Hole Transport Layer Enables Stable Perovskite Solar Cells with PCE Exceeding 24%