Abstract:Replacing the dominated hole transport material (HTM), doped Spiro-OMeTAD, in state-of-the-art perovskite solar cells (PSCs) is a challenge but an urgent issue for commercialization of this technology. Here, a solution-processable two-dimensional (2D) polymer HTM, namely, 2DP-TDB, which featuring with extended π-electron delocalization into the two-dimensions, has been successfully developed. It is found that 2DP-TDB shows multifunctional characteristics, such as dominant face-on packing orientation, good charge transport properties, efficient perovskite surface passivation capability. and hydrophobicity. As a result, planar n-i-p structured PSCs employing 2DP-TDB as dopant-free HTM exhibit a high efficiency of 21.53%, which is much larger than that using a control 2D small molecule (TB-DPP) (11.61%). Importantly, after further optimization of the perovskite film with the formamidine-based spacer, the devices based on dopant-free 2DP-TDB HTM show a champion efficiency as high as 22.17%. This work offers a fundamental strategy by developing 2D conjugated polymer HTMs for dopant-free PSCs with both high efficiency and stability.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.1c00385?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.1c00385</a>.Materials synthesis, GPC, device characterization and stability measurements, charge mobility, theoretical calculations, TGA curve, adsorption–desorption isotherms, optimized geometries, energy level diagram and CV, water droplet contact angles, film degradation evolution, device stability, photovoltaic performance variations, and FTIR, UV–vis, XRD, TEM, J–V curves, conductivity, XPS, EQE, SEM, AFM, XRD, 1H NMR, 13C NMR, and MALDI-TOF MS data (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.1c00385/suppl_file/nz1c00385_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Dimensional Tuning of Perylene Diimide‐Based Polymers for Perovskite Solar Cells with Over 24% Efficiency

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Multifunctional Two-Dimensional Polymers for Perovskite Solar Cells with Efficiency Exceeding 24%

A Polymerization‐Assisted Grain Growth Strategy for Efficient and Stable Perovskite Solar Cells

A perylene diimide based polymer: a dual function interfacial material for efficient perovskite solar cells

Improving efficiency of polymer hole transport layer based perovskite solar cells via interfacial modification

Molecular Regulation of Perylenediimide and Fluorene‐Based Cathode Interfacial Materials for Efficient Inverted Perovskite Solar Cells

Conjugated polymers of an oxa[5]helicene-derived polycyclic heteroaromatic: tailoring energy levels and compatibility for high-performance perovskite solar cells

Multifunctional Two-Dimensional Conjugated Materials for Dopant-Free Perovskite Solar Cells with Efficiency Exceeding 22%

Interfacial Molecular Doping And Energy Level Alignment Regulation For Perovskite Solar Cells With Efficiency Exceeding 23%

Spatial configuration engineering of perylenediimide-based non-fullerene electron transport materials for efficient inverted perovskite solar cells

Effect of Energy Alignment, Electron Mobility, and Film Morphology of Perylene Diimide Based Polymers As Electron Transport Layer on the Performance of Perovskite Solar Cells.

Polymeric, Cost-Effective, Dopant-Free Hole Transport Materials for Efficient and Stable Perovskite Solar Cells

Tailoring Interfacial Dipole Molecules to Mitigate Carrier and Energy Losses in Perovskite Solar Cells

A Perylenediimide Tetramer-Based 3d Electron Transport Material For Efficient Planar Perovskite Solar Cell

Interface Engineering of Perovskite Solar Cells with Multifunctional Polymer Interlayer Toward Improved Performance and Stability

Perylene Diimides: A Thickness-Insensitive Cathode Interlayer for High Performance Polymer Solar Cells

Designing a Perylene Diimide/Fullerene Hybrid As Effective Electron Transporting Material in Inverted Perovskite Solar Cells with Enhanced Efficiency and Stability

Dual Strategy Based on Quantum Dot Doping and Phenylethylamine Iodide Surface Modification for High-Performance and Stable Perovskite Solar Cells

Dual Optimization of Bulk and Interface Via the Synergistic Effect of Ligand Anchoring and Hole Transport Dopant Enables 23.28% Efficiency Inverted Perovskite Solar Cells

Reducing energy loss and stabilising the perovskite/poly (3-hexylthiophene) interface through a polyelectrolyte interlayer