Abstract:Mechanical properties of Al alloys make them an ideal candidate for different sections of marine, aerospace, automotive, etc. industries. Recently taking the advantages of additive manufacturing (AM), many complex infrastructures/components can be fabricated with very high design freedom via Al alloys. Although Al alloys have good natural corrosion resistance, however improving this property attracts lots of attention in the past few years. Post-processing methods can play a key role for addressing the issues related to internal and surface anomalies associated with as-built AM parts. Generally, these anomalies have detrimental effects on mechanical properties. In the present study, the effect of laser shock peening (LSP) treatment with different laser pulse overlaps and energies was investigated comprehensively on microstructure, surface texture, porosity, hardness, residual stresses as well as corrosion resistance of laser powder bed fused (L-PBF) AlSi10Mg samples. LSP provides strain deformation on the surface, and the deformation enhances by laser beam energy. LSP1 (laser energy of 1.5 J and 50% overlap) and LSP3 (laser energy of 4.5 J and 50% overlap) introduce maximum local strain of 7.5 and 10.7, respectively. The surface roughness of as-built state μm in terms of Rv was effectively diminished to 16.33 after LSP6 (laser energy of 4.5 J and 75% overlap). The results indicated that due to the modified surface texture, improved hardness and induced high compressive residual stresses in the surface layer. (surface hardness improvement and inducing high surface compressive residual stresses were obtained after LSP6 up to 26% and −289 MPa, respectively); the LSP treated samples exhibited higher corrosion resistance with the corrosion rate decreasing down to 50% as compared to the as-built state.

The effect of abrasive water jet peening and laser shock peening on the wear properties of direct metal laser sintered AlSi10Mg alloy

Effects of Laser Shock Peening on Corrosion Resistance of Additive Manufactured AlSi10Mg

An Experimental Investigation into the Dry Reciprocating Wear Behavior of Additively Manufactured AlSi10Mg Alloys

Laser Shock Peening of SiCp/2009Al Composites: Microstructural Evolution, Residual Stress and Fatigue Behavior

High-performance integrated additive manufacturing with laser shock peening –induced microstructural evolution and improvement in mechanical properties of Ti6Al4V alloy components

Tribological behavior and surface characteristics of severe surface plastic deformed as-cast and 3D-printed SS316L using LSP

Effects of Multiple Laser Shock Peening Impacts on Microstructure and Wear Performance of Wire-Based Laser Directed Energy Deposition 17-4PH Stainless Steel

Microstructural evolution and mechanical behaviors of Al-Cu-Li alloy processed by laser shock peening

Influencing laser shock peening treatment of the mechanical, tribological, corrosion, and microstructural characteristics on AA5052 alloy

On the Microstructure, Residual Stress and Fatigue Performance of Laser Metal Deposited TC17 Alloy Subjected to Laser Shock Peening

Effect of build direction and surface finish on wear behavior of AlSi10Mg alloy casted by laser powder bed fusion

Effect of laser shock peening on tribological properties of magnesium alloy ZK60

Effects of Laser Shock Peening on Microstructure and Properties of Ti–6Al–4V Titanium Alloy Fabricated via Selective Laser Melting

Wear Behavior of AlSi10Mg Alloy Produced by Laser‐Based Powder Bed Fusion and Gravity Casting

Impact of laser shock peening on microstructure hardness and corrosion properties of AA6061 alloy

Achieving excellent wear and corrosion properties in laser additive manufactured CrMnFeCoNi high-entropy alloy by laser shock peening

The Effect of Laser Shock Peening (LSP) on the Surface Roughness and Fatigue Behavior of Additively Manufactured Ti-6Al-4V Alloy

Effects of laser shock peening on the hot corrosion behaviour of the selective laser melted Ti6Al4V titanium alloy

The effect of laser shock processing on the microstructures and properties of 2060 Al Li alloys

Laser shock peening induced mechanical properties enhancement of 50CrVA alloy

Achieving high strength and ductility in selective laser melting Ti-6Al-4V alloy by laser shock peening