Effect of Crude Oil Contamination on the Behavior of Soil–Geosynthetic Interfaces

Ahmad Feilinejad,Ali Lashkari

DOI: https://doi.org/10.1007/s40891-023-00505-3

2023-11-17

International Journal of Geosynthetics and Ground Engineering

Abstract:An extensive series of soil alone and soil–geosynthetic interface tests is organized and degradation of stress–displacement–strength properties following contamination of soil specimens with crude oil is evaluated. To this purpose, soil alone direct shear tests are carried out on one sand and one low plastic clay soil both sampled from south of Iran. The core of the experimental program is dedicated to constant normal load tests on the interfaces between sand and clay soil specimens in contact with a woven geotextile (GTX) and a PVC geo-membrane (GMB). The crude oil-contaminated soil alone and soil–geosynthetic interface tests are performed through homogenously mixing soil specimens with contamination contents (CC) of 2%, 5%, 10%, and 15% by dry weight of soil. Results of the direct shear experiments are compared in terms of the peak (if any), and critical state friction and maximum dilation angles. The results confirm that contamination with crude oil leads to degradation of the peak and critical state friction and dilation angles in the purely frictional sand alone and sand–geosynthetic interface tests. Unlike the sand–geosynthetic interfaces, it is shown that the clay alone and clay–geosynthetic interface specimens behave cohesive–frictional, and notable adhesion intercept terms must be employed in their shear strength envelopes. Increase in CC causes progressive degradation of the friction angle and adhesion intercept in the crude oil-contaminated clay alone and clay–GTX interface tests. Compared to the clay–GTX interfaces, the adhesion intercepts in the crude oil-contaminated clay–GMB interfaces are less sensitive to CC and from a practical view, decrease in friction angle owing to increase in CC appears negligible in the clay–GMB interfaces. Degradation of the friction and adhesion efficiencies with increase in CC for all the soil–geosynthetic interface types is also investigated.