Abstract:Ultrasonic linear arrays have great potential to generate high-quality three-dimensional (3D) images by scanning the array. However, the generated images suffer from low resolution in the elevation plane, limiting the image quality for a reliable 3D Non-Destructive Testing (NDT) inspection. Although several ultrasonic imaging methods have been implemented to inspect different types of defects, there has been limited research to characterise surface-breaking cracks (SBCs) in 3D quantitatively. To improve the characterisation of surface-breaking cracks (SBCs), a 3D hybrid imaging method is proposed by combining the Half Skip Total Focusing Method (HSTFM) and the Synthetic Aperture Focusing Technique (SAFT) using a linear array. This paper proposed the implementation of an array with a reduced element length for full matrix capture (FMC) data acquisition. In conjunction with the hybrid imaging method, a reduced element array enables the utilisation of the information from a broad ultrasonic beam in the elevation direction to achieve improved image resolution. The imaging capability is assessed via a point spread function (PSF) as well as numerical simulations. From the PSF measurements, the image resolution is shown to improve with the smaller element length of the array, which is attributable to the combination of wide beamwidth and hybrid imaging method. Thereafter, experimental validation was performed with arrays of different elevation lengths, where an excellent match with the numerical results was observed. Furthermore, the crack sizing was performed using a 6-dB-drop rule, which assisted in accurately predicting the shape and size of the SBCs and is shown to measure the depth of SBCs with greater confidence. It is shown that a reduced array elevation with the hybrid imaging method and sizing method yields improved image resolution contrary to conventional linear arrays. This approach can offer a significant improvement in manifesting complete comprehension of the spatial defect relationship, enabling NDT engineers to analyse the inspection results quantitatively in 3D for progressive reliability.

Fastener hole inspection using 2D phased array

RECONSTRUCTION OF PHASED ARRAY ULTRASONIC TESTING IMAGE OF THROUGH HOLE BASED ON FINITE ELEMENT ANALYSIS

Quantifying Hidden Defect In Multi-Layered Structures By Using Eddy Current System Combined With A Scanner

A Study of Inner Crack Testing with the Laser Phased Array Method.

Ultrasonic Array Imaging of Multilayer Structures Using Full Matrix Capture and Extended Phase Shift Migration

Ultrasonic Dynamic Plane Wave Imaging for High-Speed Railway Inspection

An Ultrasonic Phased Array System for Ndt of Steel Structures

A Study of Array Remote Field Eddy Current for Hole Edge Defect Location and Evaluation of Aircraft Fasteners

Directed Acoustic Shearography for Crack Detection Around Fastener Holes in Aluminum Plates

Wavenumber-Domain Fast Reconstruction Technique Using Ultrasonic Scanning for Transverse Wave Imaging

3-D Ultrasonic Imaging of Bolt Thread Cracks Using a Linear Array Probe

High fidelity ultrasonic measurements for defect detection and characterization

3D ultrasonic imaging of surface-breaking cracks using a linear array

Nonlinear Ultrasonic Lamb Wave Phased Array Imaging Based on Hybrid Array and Time-Reversal of Harmonic

The application of ultrasonic phased array system to the inspection of fillet weld of flat plate

Nonlinear Ultrasonic Phased Array Imaging Based on Amplitude Modulation

Detection of Longitudinal Cracks with a Serrated Columnar Phased Array Transducer: A Simulation Study

Structural health monitoring of fastener hole using ring-design direct-write piezoelectric ultrasonic transducer

Focusing phase imaging for Lamb wave phased array

Ultrasonic diffuse bulk wave passive array imaging of internal defects in a complex structure

Ultrasonic imaging algorithms with limited transmission cycles for rapid nondestructive evaluation