Abstract:The manufacturing industry is currently grappling with issues related to energy dissipation and product quality, both of which significantly impact productivity. In addressing this pertinent concern, this study endeavours to identify the key indicators that contribute a crucial role in machining process. The Dry EDM (DEDM) emerges as a novel technology, wherein environmentally friendly gases serve as an alternative dielectric medium instead of liquid EDM approaches. In conventional EDM process, hydrocarbon oils release toxic emissions while the gases used in Dry EDM process don't produce harmful emissions and hence make the DEDM process sustainable. An investigation has been carried out to observe the influence of different gases like O2, N2 and Air on Siliconized Silicon-Carbide plate (SiSiC) of ø50mm*2 mm under Dry Electrical Discharge Machining. Effect of different tools is also observed using varying shapes of electrodes like plane Cu electrode of ø6 mm diameter with 60 mm length and tubular shape with outer diameter ø6mm and inner diameter ø5.1 mm with a length of 60 mm. The three gases are one by one supplied through a nozzle in the presence of plane Cu electrode to make the holes in SiSiC plate. The same process is executed with tubular Cu electrode. Modified Taguchi Orthogonal Array is applied to analyze the effect of control factors such as gap voltage, discharge current and pulse on-time through a series of experiments. Effect of different shape of tools and different gases is observed for the material removal rate (MRR) and surface roughness (SR) of specimen. In this paper, a latest DEDM process of swirl assisted flushing is proposed which provides a new technique to solve the problems of low MRR and poor surface integrity. Swirl assisted flushing works on Decay Law and also microscopic investigation justifies its validity. It is concluded by this research that current and Pulse on time are more contributing factors about 53.3 % and 27 % respectively. Furthermore, it is noted that DEDM increases MRR 19.5 % and lowers Ra approximately 2/3 than traditional machining. The MRR of O2 is about 3.1 times more than Air and N2 comes at least position while N2 creates better quality of surface due to formation of an inert nitride layer. Empirical relations are established for SR and MRR using Minitab 18 Software to develop a robust model. Confirmation test is performed to check the validity of developed mathematical model. The Novelty of this research is also extended by introducing a new method SAF. The results are finally evaluated by ANOVA.

Performance Analysis of Different Dielectric on Electrical Discharge Machined AA8011/SiC/Si3N4 Composites using Taguchi Coupled ELECTRE Approach

Electric Discharge Machining of AA7075/SiCP/B4CP Hybrid Composites machined with Al2O3 Mixed Used Engine Oil Dielectric fluid

Performance Analysis and Optimization of Different Electrode Materials and Dielectric Fluids on Machining of High Carbon High Chromium Steel in Electrical Discharge Machining

Investigation of process parameters for modeling of ceramic composite SiSiC IN dry EDM (DEDM) cutting

Machinability Analysis and Optimization of Electrical Discharge Machining in AA6061-T6/15wt.% SiC Composite by the Multi-criteria Decision-Making Approach

Near Dry Powder Mixed Electric Discharge Machining of AA7050 Hybrid Composites Utilizing Composite Tool Materials

Experimental investigation and multi-objective optimization of eco-friendly near-dry electrical discharge machining of shape memory alloy using Cu/SiC/Gr composite electrode

Research on EDM Performance of Renewable Dielectrics under Different Electrodes for Machining SKD11

Optimization of EDM Machining of High Carbon High Chromium Steel Using Zirconium and Nickel Powder Mixed Dielectric by Grey Relational Analysis

Enhanced machining of Al 10%SiCmicro 1%SiCnano hybrid composite using rotary tool rotary workpiece EDM with bio dielectrics and treated tools

Sustainable electric discharge machining using alumina-mixed deionized water as dielectric: Process modelling by artificial neural networks underpinning net-zero from industry

Assessment of electro-discharge machining for nimonic C-263 utilizing aluminum powder-infused green dielectric

Multi-objective Optimization of Electric Discharge Machining of Al-SiCp Composite by Taguchi-PCA, Firefly and Cuckoo Search Algorithm

Optimization of the Material Removal Rate and Electrode Wear Ratio in Electrical Discharge Machining of Reaction-bonded Silicon Carbide by Response Surface Methodology

Investigation on the Effect of Different Dielectric Fluids During Powder Mixed EDM of Alloy Steel

Study of Correlation of Machining Performance and Geometrical Tolerances of Si3N4-TiN Composites Using EDM Process

Analyzing the geometrical errors of silicon nitride-titanium nitride on performing electric discharge machining using response surface methodology

Surface Characterization and Tribological Performance Analysis of Electric Discharge Machined Duplex Stainless Steel

Powder Mixed Dielectric: An Approach for Improved Process Performance in EDM

Application of non-ionic liquids-based modified dielectrics during electric discharge machining (EDM) of Ti6Al4V alloy to enhance machining efficiency and process optimization

A Hybrid Design of Experiment Approach in Analyzing the Electrical Discharge Machining Influence on Stir Cast Al7075/B4C Metal Matrix Composites