Abstract:The manufacturing industry is currently grappling with issues related to energy dissipation and product quality, both of which significantly impact productivity. In addressing this pertinent concern, this study endeavours to identify the key indicators that contribute a crucial role in machining process. The Dry EDM (DEDM) emerges as a novel technology, wherein environmentally friendly gases serve as an alternative dielectric medium instead of liquid EDM approaches. In conventional EDM process, hydrocarbon oils release toxic emissions while the gases used in Dry EDM process don't produce harmful emissions and hence make the DEDM process sustainable. An investigation has been carried out to observe the influence of different gases like O2, N2 and Air on Siliconized Silicon-Carbide plate (SiSiC) of ø50mm*2 mm under Dry Electrical Discharge Machining. Effect of different tools is also observed using varying shapes of electrodes like plane Cu electrode of ø6 mm diameter with 60 mm length and tubular shape with outer diameter ø6mm and inner diameter ø5.1 mm with a length of 60 mm. The three gases are one by one supplied through a nozzle in the presence of plane Cu electrode to make the holes in SiSiC plate. The same process is executed with tubular Cu electrode. Modified Taguchi Orthogonal Array is applied to analyze the effect of control factors such as gap voltage, discharge current and pulse on-time through a series of experiments. Effect of different shape of tools and different gases is observed for the material removal rate (MRR) and surface roughness (SR) of specimen. In this paper, a latest DEDM process of swirl assisted flushing is proposed which provides a new technique to solve the problems of low MRR and poor surface integrity. Swirl assisted flushing works on Decay Law and also microscopic investigation justifies its validity. It is concluded by this research that current and Pulse on time are more contributing factors about 53.3 % and 27 % respectively. Furthermore, it is noted that DEDM increases MRR 19.5 % and lowers Ra approximately 2/3 than traditional machining. The MRR of O2 is about 3.1 times more than Air and N2 comes at least position while N2 creates better quality of surface due to formation of an inert nitride layer. Empirical relations are established for SR and MRR using Minitab 18 Software to develop a robust model. Confirmation test is performed to check the validity of developed mathematical model. The Novelty of this research is also extended by introducing a new method SAF. The results are finally evaluated by ANOVA.

Optimization of EDM Machining of High Carbon High Chromium Steel Using Zirconium and Nickel Powder Mixed Dielectric by Grey Relational Analysis

Optimizing the powder mixed EDM process of nickel based super alloy

Performance Analysis and Optimization of Different Electrode Materials and Dielectric Fluids on Machining of High Carbon High Chromium Steel in Electrical Discharge Machining

Powder Mixed Dielectric: An Approach for Improved Process Performance in EDM

Performance comparison of powder mixed EDM and traditional EDM on TZM-molybdenum super alloy using response surface methodology

Optimization of the Material Removal Rate and Electrode Wear Ratio in Electrical Discharge Machining of Reaction-bonded Silicon Carbide by Response Surface Methodology

Near Dry Powder Mixed Electric Discharge Machining of AA7050 Hybrid Composites Utilizing Composite Tool Materials

Process parameters optimization of EDM for hybrid aluminum MMC using hybrid optimization technique

Investigation on Electrical Discharge Machining Parameters of Aluminium7075/Boron Carbide/Titanium Diboride Hybrid Composites by Grey Relational Analysis

Machining characteristics and optimization of process parameters in die-sinking EDM of Inconel 625

Parameter optimization in the enhancement of MRR of titanium alloy using newer mixing method in PMEDM process

Improvement of process performance of powder mixed electrical discharge machining by optimisation -A Review

Optimization of process parameters of powder mixed EDM for high carbon high chromium alloy steel (D2 steel) through GRA approach

Experimental investigation and multi-objective optimization of eco-friendly near-dry electrical discharge machining of shape memory alloy using Cu/SiC/Gr composite electrode

Machine learning for multi-dimensional performance optimization and predictive modelling of nanopowder-mixed electric discharge machining (EDM)

Investigation of process parameters for modeling of ceramic composite SiSiC IN dry EDM (DEDM) cutting

Experimental investigation and performance enhancements characteristics of gaseous assisted powder mixed near dry electric discharge machining

Machining Of Inconel-825 Superalloy With Magnetic Field Assisted Electrical Discharge Turning: A Optimization Approach Using Response Surface Methodology And Multi-Objective Genetic Algorithm

Assessment of electro-discharge machining for nimonic C-263 utilizing aluminum powder-infused green dielectric

Performance capabilities of EDM of high carbon high chromium steel with copper and brass electrodes

Investigation on the Effect of Different Dielectric Fluids During Powder Mixed EDM of Alloy Steel