Abstract:Solid-state dye-sensitized solar cells (sDSCs) are devoid of such issues as electrolyte evaporation or leakage and electrode corrosion, which are typical for traditional liquid electrolyte-based DSCs. Poly(3,4-ethylenedioxythiophene) (PEDOT) is one of the most popular and efficient p-type conducting polymers that are used in sDSCs as a solid-state hole-transporting material. The most convenient way to deposit this insoluble polymer into the dye-sensitized mesoporous working electrode is in situ photoelectrochemical polymerization. Apparently, the structure and the physicochemical properties of the generated conducting polymer, which determine the photovoltaic performance of the corresponding solar cell, can be significantly affected by the preparation conditions. Therefore, a simple and fast analytical method that can reveal information on polymer chain length, possible chemical modifications, and impurities is strongly required for the rapid development of efficient solar energy-converting devices. In this contribution, we applied matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS) for the analysis of PEDOT directly on sDSCs. It was found that the PEDOT generated in aqueous micellar medium possesses relatively shorter polymeric chains than the PEDOT deposited from an organic medium. Furthermore, the micellar electrolyte promotes a transformation of one of the thiophene terminal units to thiophenone. The introduction of a carbonyl group into the PEDOT molecule impedes the growth of the polymer chain and reduces the conductivity of the final polymer film. Both the simplicity of sample preparation (only application of the organic matrix onto the solar cell is needed) and the rapidity of analysis hold the promise of making MALDI MS an essential tool for the physicochemical characterization of conducting polymer-based sDSCs.

Effect of 1 wt% Dimethyl Sulfoxide on the Electrical and Photovoltaic Parameters of Schottky Diodes and Organic Solar Cells Based on PEDOT:PSS

Effect of DMSO Solvent Treatments on the Performance of PEDOT:PSS Based Organic Electrochemical Transistors

Characterization of doped PEDOT: PSS and its influence on the performance and degradation of organic solar cells

Improved Alignment of PEDOT:PSS Induced by in-situ Crystallization of "Green" Dimethylsulfone Molecules to Enhance the Polymer Thermoelectric Performance

Understanding the Mechanism of PEDOT: PSS Modification Via Solvent on the Morphology of Perovskite Films for Efficient Solar Cells

Dopamine Semiquinone Radical Doped PEDOT:PSS: Enhanced Conductivity, Work Function and Performance in Organic Solar Cells

Enhancing Efficiency of Organic Solar Cells with Alkyl Diamines Doped PEDOT: PSS

The Effect of Solvent Treatment on the Buried PEDOT:PSS Layer

Effect of Wetting Surfactants on the Work Function of PEDOT:PSS for Organic Solar Cells

Accurate Measurement of Performance of Polymer Solar Cell with Highly Conductive PEDOT:PSS

Series of Polar Alcohol-Additives Assisted Improvement in the PEDOT:PSS Film Property and Bulk-Heterojunction Organic Solar Cell Performance

Matrix-assisted laser desorption/ionization mass spectrometric analysis of poly(3,4-ethylenedioxythiophene) in solid-state dye-sensitized solar cells: comparison of in situ photoelectrochemical polymerization in aqueous micellar and organic media

Efficiency enhancement of polymer solar cells via zwitterion doping in PEDOT:PSS hole transport layer

In-situ doping and post-treatments modulate the photoelectrical properties and stability of electropolymerization poly(3,4-ethylenedioxythiophene)

Enhanced Photovoltaic Performance of PDPP3T Bulk Heterojunction Using D-sorbitol Doped PEDOT:PSS

Improved efficiency of organic solar cell using MoS2 doped poly(3,4-ethylenedioxythiophene)(PEDOT) as hole transport layer

One Key Issue in Characterization of Organic Solar Cells with Solution Processed Interfacial Layers

A Combined XRD, Solvatochromic, and Cyclic Voltammetric Study of Poly (3,4-Ethylenedioxythiophene) Doped with Sulfonated Polyarylethersulfones: Towards New Conducting Polymers

Cooperative Effect of Carbon Nanotubes and Dimethyl Sulfoxide on PEDOT: PSS Hole Transport Layer in Planar Perovskite Solar Cells

Low Boiling-point Solvents Treatment of PEDOT∶PSS Film for Optimized Photovoltaic Cell Performance

The Effect of Methanol Treatment on the Performance of Polymer Solar Cells