Interface-Promoted Direct Oxidation of p -Arsanilic Acid and Removal of Total Arsenic by the Coupling of Peroxymonosulfate and Mn-Fe-Mixed Oxide
Ming-Kun Ke,Gui-Xiang Huang,Shu-Chuan Mei,Zhao-Hua Wang,Ying-Jie Zhang,Tian-Wei Hua,Li-Rong Zheng,Han-Qing Yu
DOI: https://doi.org/10.1021/acs.est.1c00386
2021-05-07
Abstract:As one of the extensively used feed additives in livestock and poultry breeding, <i>p</i>-arsanilic acid (<i>p</i>-ASA) has become an organoarsenic pollutant with great concern. For the efficient removal of <i>p</i>-ASA from water, the combination of chemical oxidation and adsorption is recognized as a promising process. Herein, hollow/porous Mn–Fe-mixed oxide (MnFeO) nanocubes were synthesized and used in coupling with peroxymonosulfate (PMS) to oxidize <i>p</i>-ASA and remove the total arsenic (As). Under acidic conditions, both <i>p</i>-ASA and total As could be completely removed in the PMS/MnFeO process and the overall performance was substantially better than that of the Mn/Fe monometallic system. More importantly, an interface-promoted direct oxidation mechanism was found in the <i>p</i>-ASA-involved PMS/MnFeO system. Rather than activate PMS to generate reactive oxygen species (i.e., SO<sub>4</sub><sup>·–</sup>, ·OH, and <sup>1</sup>O<sub>2</sub>), the MnFeO nanocubes first adsorbed <i>p</i>-ASA to form a ligand–oxide interface, which improved the oxidation of the adsorbed <i>p</i>-ASA by PMS and ultimately enhanced the removal of the total As. Such a direct oxidation process achieved selective oxidation of <i>p</i>-ASA and avoidance of severe interference from the commonly present constituents in real water samples. After facile elution with dilute alkali solution, the used MnFeO nanocubes exhibited superior recyclability in the repeated <i>p</i>-ASA removal experiments. Therefore, this work provides a promising approach for efficient abatement of phenylarsenical-caused water pollution based on the PMS/MnFeO oxidation process.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.est.1c00386?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.est.1c00386</a>.Text describing the detailed procedures of the chronoamperometry experiments; tables showing the concentration of the leaching metal ions after the reaction; water quality parameters of the real water samples; binding energies and relative intensities of Fe 2p<sub>3/2</sub> and Mn 2p<sub>3/2</sub> XPS results; percentages of inorganic As, residue <i>p</i>-ASA, and other As species in the different reaction systems; distribution of UPLC-QTOF-MS detected products in the different reaction systems; information on mass spectrometry piece and proposed structures of the reaction products; figures showing the N<sub>2</sub> adsorption–desorption isotherms and zeta potential of the MnFeO nanocubes; rate constant of the pseudo-first-order kinetics; effect of PMS dosage on <i>p</i>-ASA and the total As removal; removal efficiencies of <i>p</i>-ASA and total As in different reaction systems and different water samples; kinetics curves of <i>p</i>-ASA oxidation in different systems; XPS and FTIR spectra and XRD patterns of the MnFeO samples; LC–MS chromatogram and MS spectra of the intermediates of <i>p</i>-ASA oxidation; extracted ion chromatograms of <i>p</i>-azophenylarsenic acid on the catalysts in MnFeO alone and PMS/MnFeO systems; removal efficiencies of different arsenic species by the adsorption of MnFeO nanocubes (<a class="ext-link" href="/doi/suppl/10.1021/acs.est.1c00386/suppl_file/es1c00386_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
environmental sciences,engineering, environmental