Abstract:In order to establish quantitative process–structure–property relationships in thermal spray coatings, a robust framework for defining (micro)structural characteristics is needed. We present a quantitative characterization of the three-dimensional morphology of porosity in spray-formed tantalum samples based on high-resolution X-ray micro-computed tomography. Using synchrotron facilities, we acquired dozens of high-resolution scans, enabling a statistically meaningful comparison across multiple samples, different regions within samples, and spray processes. We quantify the spatial distribution, size, and topology of porous inclusions, with a significant focus on variability across samples and different spray processes (plasma and cold sprayed), as well as sensitivity to image segmentation and resolution. Based on a typical segmentation, we report porosities ranging from 0.9 to 1.7 pct for all samples tested, with significant sensitivity due to image segmentation resulting in estimates as low as 0.6 pct and as high as 4.8 pct. For the complex pore space morphology observed in these materials, we argue that a conventional analysis based on identifying individual pores is not well suited, and propose an alternative approach based on morphological metrics with a rich history in porous media literature, such as spatial correlations, local pore thickness, and scale-dependent sub-sampling. Spatial correlations indicate anisotropic splat structures, but only mildly anisotropic pores. Various measures of pore size show a wide distribution of sizes, ranging from sub-micron to 10-micron length scales. Scale-dependent variations in porosity suggest that representative volumes of several hundred microns are required for convergence of morphological metrics, with larger volumes for cold-spray materials. This work provides a robust quantitative basis for describing three-dimensional pore structure in thermal spray coatings.

In Situ Spatially Resolved Coating Thickness Measurements in Thermal Spraying

A Novel High-Frequency Ultrasonic Approach for Evaluation of Homogeneity and Measurement of Sprayed Coating Thickness

An Advanced Methodology for Nondestructive Measurement of Thermal Barrier Coating Thickness via Point Cloud Processing

Influence of Coating Spray on Surface Measurement Using 3D Optical Scanning Systems

Thickness Measurement Approach for Plasma Sprayed Coatings Using Ultrasonic Testing Technique

Layer Structure Formation Induced by In-Situ Deposit Surface Temperature under Different Scanning Methods During Thermal Spraying

Method of 3D Coating Accumulation Modeling Based on Inclined Spraying

Computer design of thermal sprayed metal powder coatings

Thickness evaluations for thin coatings using laser scanning thermography

Specific Measurements of In-Flight Droplet and Particle Behavior and Coating Microstructure in Suspension and Solution Plasma Spraying

Process Monitoring of Coating Temperature in Plasma Spraying

Non-destructive Evaluation of Uneven Coating Thickness Based on Active Long Pulse Thermography

Simultaneous Measurement of Thickness and Sound Velocity of Porous Coatings Based on the Ultrasonic Complex Reflection Coefficient

Highly accurate thickness measurement of multi-layered automotive paints using terahertz technology

Quantifying Pore Morphology in Spray-Formed Tantalum Using X-ray Micro-computed Tomography

An Integrated Investigation Approach for Coating Temperature Measurement and Control During Plasma Spraying

A non-destructive measurement method for thermal barrier coating thickness in a robot polishing process based on point cloud processing

Simultaneous determination of the coating thickness and its longitudinal velocity by ultrasonic nondestructive method

Monitoring the Cold Spray Process: Real-Time Particle Velocity Monitoring Through Airborne Acoustic Emission Analysis

Residual Stress in Thermal Spray Coatings Measured by Curvature Based on 3d Digital Image Correlation Technique

A Novel Integrated Temperature Investigation Approach of Sprayed Coatings During APS Process