Abstract:To investigate the effect of hot and humid environmental factors on the mechanical properties of asphalt mixtures research, in this paper, the dynamic modulus of asphalt mixtures under the effects of aging, dry–wet cycling, and coupled effects of aging and dry–wet cycling were measured by the simple performance tester (SPT) system, and the dynamic modulus principal curves were fitted based on the sigmoidal function. The results show that under the aging effect, the dynamic modulus of asphalt mixture increases with the aging degree; the dynamic modulus of short-term aged, medium-term aged, long-term aged, and ultra-long-term aged asphalt mixtures increased by 9.3%, 26.4%, 44.8%, and 57%, respectively, compared to unaged asphalt mixtures at 20 °C and 10 Hz; the high-temperature stability performance is enhanced, and the low temperature cracking resistance performance is enhanced; under the dry–wet cycle, the aging effect of asphalt water is more obvious in the early stage, and dynamic modulus of resilience of the mixture is slightly increased. In the long-term wet–dry cycle process, water on the asphalt and aggregate erosion increased, the structural bearing capacity attenuation, and the dynamic modulus of rebound greatly reduced at 20 °C and 10 Hz. For example, the dynamic modulus of asphalt mixtures with seven wet and dry cycles increased by 3% compared to asphalt mixtures without wet and dry cycles, and the dynamic modulus of asphalt mixtures with 14 cycles of wet and dry cycles and 21 cycles of wet and dry cycles decreased by 10.8% and 16.5%, respectively, compared to asphalt mixtures without wet and dry cycles. The main curve as a whole shifted downward; the high-temperature performance decreased significantly; in the aging wet–dry cycle coupling, the aging asphalt mixture is more susceptible to water erosion, and the first wet–dry cycle after the mix by the degree of water erosion is relatively small, along with the dynamic modulus of rebound. The dynamic modulus of resilience is relatively larger, and the high-temperature performance is relatively better, while the low-temperature performance is worse.

Investigation into the Impact of Humidity on Early Age Cement Concrete Pavement Behavior in Hot and Humid Regions

Study on the Evolution Behavior of Humidity Fields in Cement Concrete Pavements of a Coastal Airport During Early Stages in Humid and Hot Areas

Evaluating Hydration Characteristics and HIPERPAV Prediction of Temperature Development in Early-Age Concrete Pavement

Research on the Behavior of Rigid Pavement of Basalt Fiber Reinforced Dowel Bar under the Condition of Variable Temperature

Modeling Hydration Properties and Temperature Developments of Early-Age Concrete Pavement Using Calorimetry Tests

Modelling on Temperature Field of High-Strength Concrete Pavement with the Impact of Internal Curing

Optimization and regulation of pavement concrete properties in plateau environment with large daily temperature difference: From mixture design to field application

Research And Application On Performance-Based Optimization Of Concrete Structure Construction

Study on the Effect of Hot and Humid Environmental Factors on the Mechanical Properties of Asphalt Concrete

Temperature Spatial and Temporal Distributions of Pavements with Various Paving Materials

Development of Water Retentive and Thermal Resistant Cement Concrete and Cooling Effects Evaluation

The Effect of Water on Pavement Response Based on 3D FEM Simulation and Experiment Evaluation

SIMULATION OF TEMPERATURE FIELD OF CONCRETE PAVEMENT AT EARLY-AGE

Effects of Construction Conditions on Built-In Temperature Gradient of Concrete Pavement: A Numerical Study

Fatigue behaviour of rock asphalt concrete considering moisture, high-temperature, and stress level

Moisture Movement in Early-Age Concrete under Cement Hydration and Environmental Drying

Structural Response of a Cement Concrete Pavement with a Buffer Layer to Temperature and Moving-Load Effects

Chloride Permeability and Deterioration Mechanism of Pavement Concrete Under Load–Temperature Coupling

Moisture Diffusion Coefficient of Concrete under Different Conditions

Interior Relative Humidity of Normal- and High-Strength Concrete at Early Age

Calculation of shrinkage strain in early-age concrete structures---an example with concrete pavements