Abstract:Hydraulic and anti-clogging performances are two important evaluation indicators for drip irrigation emitters. But the two indicators are in conflict when the two design requirements for emitter channel should be satisfied simultaneously. On one hand the channel should be long, narrow and meandering to have good hydraulic performance, but on the other hand it should be short, wide and smooth to obtain good anti-clogging performance. Multi-objective optimization for the emitter channel was reported by Zhang Jun in 2009. The main difficulty lies in the lack of quantitative indicator for the anti-clogging performance of emitters. This paper applied several ways including gradual reduction, gradual divergence and dividing flow to increase local pressure loss in emitter channel design and proposed a multi-objective optimization method for the channel of drip irrigation emitter based on grey target theory. This method combined orthogonal experimental design with grey target theory which is powerful to solve the problems with the uncertainty due to less data, little sample and incomplete information to optimize the emitter channel, with the goal of obtaining reasonable hydraulic and anti-clogging performances. As Computational Fluid Dynamics(CFD) analysis has been widely used in the research on drip irrigation emitters and proved to be effective by many experts, it was adopted to get the orthogonal experimental results in this paper. First, two quantitative indicators for the emitter’s hydraulic and anti-clogging performances were defined respectively. The quantitative indicator for the hydraulic performance was flow state exponent. And the quantitative indicator for the anti-clogging performance was particle passing rate which was the ratio between the number of outgoing particles and total particles into the channel. Second, CFD analyses were carried out under different boundary conditions. Third, the results of the orthogonal design were obtained and analyzed with intuitive comparative analysis, variance analysis and linear regression analysis. And then the relationships between the two quantitative indicators and channel parameters were obtained. Fourth, the relationships were used to get more information in this problem, and the data group was extended from 16 to 256. Fifth, grey target theory was employed to analyze the data obtained. The results showed that the preferential sequence could be obtained according to the target heart rate which was an important concept in grey target theory. When the weights of hydraulic and anti-clogging performances were both 0.5, the best combination of factor levels for the emitter channel was A3B4C2D4, and the largest target heart rate was 0.795. The optimal channel had a flow state exponent of 0.5150 and a particle passing rate of 88.504%. When the channel was optimized aiming at single objective, the smallest flow state exponent was 0.5136 and the highest particle passing rate was 95.642%. Of course, seen from the comparison of the results between the multi-objective optimization and single-objective optimization, it is difficult to simultaneously get the best result for each target in multi-objective optimization. It is worth noting that when different performance combinations are needed, different weights should be given to the two quantitative indicators. This method provides a quantitative approach to guide the design of emitter channels.

The Study of Structural Optimization on Hydraulic Performance and Anti-Clogging Performance of Labyrinth Drip Irrigation Emitters

Effect of Optimization Forms of Flow Path on Emitter Hydraulic and Anti-Clogging Performance in Drip Irrigation System

Numerical Simulation and Optimisation of the Inlet Structure of Dentiform Emitters in Drip-Irrigation Systems

Optimal design and experiment for divided-flow emitter in drip irrigation

Application of Computational Fluid Dynamics to Design High Performance Drip Irrigation Emitters

Anti-clogging design method for the labyrinth channels of drip irrigation emitters

Numerical simulation and structure optimization for hydraulic performance of perforated drip irrigation emitters

Influence and Analysis of Structure Design and Optimization on the Performance of a Pit Drip Irrigation Emitter*

Influence of Geometrical Parameters of Labyrinth Flow Path of Drip Emitters on Hydraulic and Anti-Clogging Performance

Simulation and Verification of Hydraulic Performance and Energy Dissipation Mechanism of Perforated Drip Irrigation Emitters

Anti-Clogging Evaluation for Drip Irrigation Emitters Using Reclaimed Water

Structure and Hydraulic Performance Experimental Research on Labyrinth Channels of Drip Irrigation Emitters

Study of Hydraulic Performance of the Eddy Channel for Drip Emitters

Rapid Evaluations of Anticlogging Performance of Drip Emitters by Laboratorial Short-Cycle Tests

Numerical Flow Simulation and Optimum Channel Design of Drip Irrigation Emitter

Modeling of hydraulic characteristics through labyrinth emitter in drip irrigation using computational fluid dynamics

Numerical Study On Flow Property In Dentate Path Of Drip Emitters

Study on Hydraulic Performance of Drip Emitters by Computational Fluid Dynamics

Hydraulic performance and energy dissipation effect of pit structure flow channel emitter

Physical Clogging Characteristics of Labyrinth Emitters under Low-Quality (Sand-Laden Water) Irrigation

Assessment of Flat Emitter Anti-Clogging Performance in Drip Irrigation Systems