Abstract:Objectives: (1) To synthesize 3mol% yttria-stabilized zirconia (3Y-TZP) powders via coprecipitation route, (2) to obtain zirconia ceramic specimens, analyze surface characteristics, and mechanical properties, and (3) to compare the processed material with three reinforced dental ceramics. Methods: A coprecipitation route was used to synthesize a 3mol% yttria-stabilized zirconia ceramic processed by uniaxial compaction and pressureless sintering. Commercially available alumina or alumina/zirconia ceramics, namely Procera AllCeram (PA), In-Ceram Zirconia Block (CAZ) and In-Ceram Zirconia (IZ) were chosen for comparison. All specimens (6mmx5mmx5mm) were polished and ultrasonically cleaned. Qualitative phase analysis was performed by XRD and apparent densities were measured on the basis of Archimedes principle. Ceramics were also characterized using SEM, TEM and EDS. The hardness measurements were made employing Vickers hardness test. Fracture toughness (K(IC)) was calculated. Data were analyzed using one-way analysis of variance (ANOVA) and Tukey's test (alpha=0.05). Results: ANOVA revealed that the Vickers hardness (p<0.0001) and fracture toughness (p<0.0001) were affected by the ceramic materials composition. It was confirmed that the PA ceramic was constituted of a rhombohedral alumina matrix, so-called alpha-alumina. Both CAZ and IZ ceramics presented tetragonal zirconia and alpha-alumina mixture of phases. The SEM/EDS analysis confirmed the presence of aluminum in PA ceramic. In the IZ and CAZ ceramics aluminum, zirconium and cerium in grains involved by a second phase containing aluminum, silicon and lanthanum were identified. PA showed significantly higher mean Vickers hardness values (H(V)) (18.4+/-0.5GPa) compared to vitreous CAZ (10.3+/-0.2GPa) and IZ (10.6+/-0.4GPa) ceramics. Experimental Y-TZP showed significantly lower results than that of the other monophased ceramic (PA) (p<0.05) but it showed significantly higher fracture toughness (6.0+/-0.2MPam(1/2)) values when compared to the other tested ceramics (p<0.05). Significance: The coprecipitation method used to synthesize zirconia powders and the adopted ceramic processing conditions led to ceramics with mechanical properties comparable to commercially available reinforced ceramic materials.

Study of Non-Transformable t'-YSZ by Addition of Niobia for TBC Application

In-situ Synthesis of Gadolinium Niobate Quasi-Binary Composites with Balanced Mechanical and Thermal Properties for Thermal Barrier Coatings

Cyclic fatigue behavior of Y‐TZP nanostructures with non‐homogeneous yttria distribution

High Temperature Mechanical Properties of Zirconia Metastable T '-Phase Degraded Yttria Stabilized Zirconia

Single-step laser sintering of YSZ powder-beds to TBC applications

3Y-TZP ceramics toughened by Sr2Nb2O7 secondary phase

Thermo-physical properties and ferroelastic toughening of non-transformable t’-yttria-stabilized hafnia-zirconia solid solution

Improvement in Thermal Shock Resistance of Gadolinium Zirconate Coating by Addition of Nanostructured Yttria Partially-Stabilized Zirconia

Effect of mol.% of Yttria in Zirconia matrix alongside a comparative study among YSZ, alumina & ZTA ceramics in terms of mechanical and functional properties

Synthesis of Gadolinium Zirconate by Coprecipitaiton and Its Properties for TBC Application

Y-TZP ceramic processing from coprecipitated powders: a comparative study with three commercial dental ceramics

Multicomponent high‐entropy Zr‐Y‐Yb‐Ta‐Nb‐O oxides for next‐generation thermal barrier coating applications

Enhancing Fracture Toughness of Dental Zirconia through Incorporation of Nb into the Surface

Thermophysical and mechanical properties of cubic, tetragonal and monoclinic ZrO2

Effect of TZP nanoparticles synthesized by RCVD on mechanical properties of ZTA composites sintered by SPS

Stabilize Consequences of Y2O3 in Zirconia Thermal Barrier Coatings (TBC)

A New Al2O3‐Protected EB‐PVD TBC with Superior CMAS Resistance

Mechanical behavior and microstructural characterization of different zirconia polycrystals in different thicknesses

Zirconia-based Nanocomposite Toughened by Functionalized Multi-Wall Carbon Nanotubes

Thermal Transport in Nanoporous Yttria-Stabilized Zirconia by Molecular Dynamics Simulation

Ferroelastic Domain Identification and Toughening Mechanism for Yttrium Tantalate–zirconium Oxide