Abstract:The paper considers the influence of the parameters of the plasma spraying process on the technological characteristics of multilayer coatings based on nickel-chromium, nickel-chromium-aluminum-yttrium materials, oxide ceramics, intended for operation at high temperature and additional dynamic loads. The design of plasma coatings during their application (with subsequent high-energy processing) under such conditions requires a comprehensive solution – both the use of high-quality powder ingredients and the optimization of technological parameters. The plasma process of applying powder materials has been improved to obtain the maximum values of their utilization factors. The technological characteristics that affect the properties of plasma coatings are optimized, namely: the flow rates of the plasma-forming and materials-transporting gases, the flow rate of supplied powder materials, the current and voltage of the electric arc of the plasma torch, the distance from the plasma torch nozzle exit to the substrate. The paper presents the results of studies of the structure of coatings, performed using scanning electron microscopy. Their analysis has made it possible to form general regularities obtained by the action of radiation of compression plasma flows on coatings formed by air plasma. The considered structures are created using the processes of melting, compaction and high-speed cooling of plasma coatings. The main optimization indicators are the maximum local compaction and spillage of the obtained compositions with the absence of defects and destruction from the impact of compression plasma flows. The main effect during the action of radiation of a compression plasma flow on previously formed coatings is thermal. It contributes heating of the near-surface layer. When the coating is exposed to radiation of compression plasma flows, a remelted layer of oxides with a thickness of about 12–15 μm is created, smoothing the relief of the formed surface and creating a network of cracks on the surface, diverging into the depth of the coating. The liquid-phase processes occurring in the molten phase of the near-surface layers after exposure to compression plasma radiation change the structure of the layers and contribute to the modification of their mechanical properties. By smoothing the surface, increasing the density of the surface crystallized layer and minimizing macro-defects – pores or macrocracks – the mechanical characteristics of the coatings increase.

Development of Thermal Spray Alumina Coating for High Diffuse Reflectivity Application in Lambertian Screen

Anti-reflection Coating at 550 Nm Fabricated by Atomic Layer Deposition

Development of Thermal Spray Coating Solution for Ceramic Substrates

Study of the Mechanical Properties and Thermal Control Performance of Plasma-Sprayed Alumina Coating on Aluminum Alloy Surface

Achieving high temperature broadband electromagnetic reflection reduction via Al2O3 / FeCrAl refractory composite coating

Cobalt- and Chromium-Oxide-Based Coatings: Thermally Spraying a Glaze Layer

Improved Adhesion of Plasma-Sprayed Ceramic Coatings on Textured Ceramic Substrates

Nanoporous antireflection coating for high-temperature applications in the infrared

Metastable Phase Formation, Microstructure, and Dielectric Properties in Plasma-Sprayed Alumina Ceramic Coatings

Study of amorphous alumina coatings for next-generation nuclear reactors: High-temperature in-situ and post-mortem Raman spectroscopy and X-ray diffraction

Advanced Analyses of Heating Elements Manufactured by an Optimized Arc Spraying Process

Surface Treatment of Alumina-Based Ceramics Using Combined Laser Sources

Effect of High-Temperature Thermal Shock on Solar Absorption Rate of Alumina Coating

Broadband plasma spray anti-reflection coating technology for millimeter-wave astrophysics

Design and Development of Cost-Effective Equipment for Tribological Evaluation of Thermally Sprayed Abradable Coatings

Ultrathin protective coatings by atomic layer engineering for far ultraviolet aluminum mirrors

Multi-Layers Composite Plasma Coatings Based on Oxide Ceramics and M-Croll

Highly Efficient Thermal Barrier Coatings Based on Arc Spraying of Amorphous Fe-based Alloys and NiCrAlY for Use in LH2 Tanks and Other Cryogenic Environments

Effect of Surface Modification on Erosion Behavior of Alumina-Samarium Strontium Aluminate Composite Thermal Barrier Coatings

Effect of Droplet Initial Temperature on Substrate Melting and Its Re-solidification in Plasma Spray Process

Coating of Aluminum with High Deposition Rates through Extreme High-Speed Laser Application