Wood-Based Solar Interface Evaporation Device with Self-Desalting and High Antibacterial Activity for Efficient Solar Steam Generation

Jin Yang,Yu Chen,Xiaohua Jia,Yong Li,Sizhe Wang,Haojie Song
DOI: https://doi.org/10.1021/acsami.0c14068
2020-09-22
Abstract:The main challenges of a solar steam generation device based on biomass materials are complicated processing techniques and relatively low efficiency. To solve these problems, we reported a simple immersion treatment method by depositing polydopamine (PDA) and silver nanoparticles (AgNPs) on natural wood to prepare a novel solar interface evaporation device. exhibits a unique bilayer structure. The absorbance of the top light absorption layer is higher than 96% in a wide wavelength range (300–2500 nm). Owing to the synergistic photothermal effect between PDA and AgNPs, has ultrafast solar–thermal response (a temperature increase of 42.5 °C within 5 min under 1 sun), and more heat is located at the steam generation interface (the surface temperature is 45.1 °C). The natural wood layer at the bottom with low thermal conductivity provides sufficient water supply and reduces the bulk heat loss. A high evaporation rate of 1.58 kg m<sup>–2</sup> h<sup>–1</sup> is achieved using under 1 sun (1 kW m<sup>–2</sup>). Its evaporation efficiency reaches 88.6%. The results upon sewage treatment and seawater desalination indicate that has an excellent purification ability and self-desalting capacity. More importantly, when compared to traditional solar evaporators, exhibits high antibacterial activity. The result of this antibacterial experiment shows that this material almost completely kills harmful bacteria. Therefore, has a high application potential in seawater desalination and sewage purification, providing a significant incentive to solve the problem of insufficient freshwater supply.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c14068?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c14068</a>.Photographs of the preparation process of and ; photograph of cut out and SEM images of cut out under different magnifications; XPS results of samples; thermal conductivity results of dry wood, dry , wet wood, and wet ; adsorption dye solution test results of ; photographs of steam generation of ; evaporation rate of the four systems in the dark conditions within 1 h; <i>E. coli</i> suspension cultured with different samples for 24 h; evaporation rate and efficiency of the sample within 24 working cycles; ATR-FTIR spectra of the sample after 24 working cycles; surface temperature IR mapping images of the evaporation system under different sun conditions; evaporation rate and efficiency of the seawater as a function of time under different sun conditions; top-view of during the desalination test within 24 h; comparison results of the evaporator and other evaporators; and steady-state energy balance analysis (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c14068/suppl_file/am0c14068_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology
What problem does this paper attempt to address?