Abstract:The main challenges of a solar steam generation device based on biomass materials are complicated processing techniques and relatively low efficiency. To solve these problems, we reported a simple immersion treatment method by depositing polydopamine (PDA) and silver nanoparticles (AgNPs) on natural wood to prepare a novel solar interface evaporation device. exhibits a unique bilayer structure. The absorbance of the top light absorption layer is higher than 96% in a wide wavelength range (300–2500 nm). Owing to the synergistic photothermal effect between PDA and AgNPs, has ultrafast solar–thermal response (a temperature increase of 42.5 °C within 5 min under 1 sun), and more heat is located at the steam generation interface (the surface temperature is 45.1 °C). The natural wood layer at the bottom with low thermal conductivity provides sufficient water supply and reduces the bulk heat loss. A high evaporation rate of 1.58 kg m–2 h–1 is achieved using under 1 sun (1 kW m–2). Its evaporation efficiency reaches 88.6%. The results upon sewage treatment and seawater desalination indicate that has an excellent purification ability and self-desalting capacity. More importantly, when compared to traditional solar evaporators, exhibits high antibacterial activity. The result of this antibacterial experiment shows that this material almost completely kills harmful bacteria. Therefore, has a high application potential in seawater desalination and sewage purification, providing a significant incentive to solve the problem of insufficient freshwater supply.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c14068?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c14068</a>.Photographs of the preparation process of and ; photograph of cut out and SEM images of cut out under different magnifications; XPS results of samples; thermal conductivity results of dry wood, dry , wet wood, and wet ; adsorption dye solution test results of ; photographs of steam generation of ; evaporation rate of the four systems in the dark conditions within 1 h; E. coli suspension cultured with different samples for 24 h; evaporation rate and efficiency of the sample within 24 working cycles; ATR-FTIR spectra of the sample after 24 working cycles; surface temperature IR mapping images of the evaporation system under different sun conditions; evaporation rate and efficiency of the seawater as a function of time under different sun conditions; top-view of during the desalination test within 24 h; comparison results of the evaporator and other evaporators; and steady-state energy balance analysis (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c14068/suppl_file/am0c14068_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Biomass derived Janus solar evaporator for synergic water evaporation and purification

Biomass Waste‐Derived Solar Evaporator for Efficient and Low‐Cost Water Evaporation

Biomass‐Derived Hybrid Hydrogel Evaporators for Cost‐Effective Solar Water Purification

A Bifunctional MoS2-based Solar Evaporator for Both Efficient Water Evaporation and Clean Freshwater Collection

Biomass‐based materials for sustainably‐sourced solar‐driven interfacial steam generation

Biomass-derived three-dimensional robust solar evaporator for efficient steam generation, water purification and salt-resistant desalination

Multifunctional biomass-based solar evaporator with enhanced sterilization performance for solar-driven clean water evaporation

Wood-Based Solar Interface Evaporation Device with Self-Desalting and High Antibacterial Activity for Efficient Solar Steam Generation

Design and performance boost of a MOF-functionalized-wood solar evaporator through tuning the hydrogen-bonding interactions

A stable and efficient hydrogel/sponge solar evaporator with splendid water supply

A Lotus‐Petiole‐Inspired Hierarchical Design with Hydrophilic/Hydrophobic Management for Enhanced Solar Water Purification

Scalable and low-cost fabrication of hydrophobic PVDF/WS2 porous membrane for highly efficient solar steam generation

Sustainable lignocellulosic-based sponge with Janus salt-tolerant structure for efficient solar steam generation

Recyclable and efficient ocean biomass-derived hydrogel photothermal evaporator for thermally-localized solar desalination

Biomass photothermal structures with carbonized durian for efficient solar-driven water evaporation

High-performance bilayer solar evaporators constructed by candle-derived carbon nanoparticle/wood hybrid

Highly salt-resistant and all-weather solar-driven interfacial evaporators with photothermal and electrothermal effects based on Janus graphene@silicone sponges

Highly Efficient and Cost-Effective Water Desalination via the Hybrid Hydrogel-Based Solar-Driven Interfacial Evaporation

Banyan-inspired hierarchical evaporators for efficient solar photothermal conversion

Rational Design of High‐Performance Bilayer Solar Evaporator by Using Waste Polyester‐Derived Porous Carbon‐Coated Wood

Assembled Wood-Polyester Fabric-Hydrogel Janus Evaporator for Sustainable Seawater Desalination