Abstract:Confined walls are popular in areas exposed to seismic action. The advantage of such structures is increased load-bearing capacity, ductility, and energy dissipation. Confined masonry walls are also used to restrain the intensity of cracking and improve load-bearing capacity in areas exposed to seismic action. This paper describes the research on 18 confined walls and presents a comparison with research on unconfined walls (referenced models). The confined models were classified into three series: HOS-C-AAC-without openings and with confining elements around the perimeter; HAS-C1-AAC with a centrally positioned opening and circumferential confinement; and HAS-C2-AAC with a centrally positioned window opening and additional confinement along the vertical edges of the opening. The area of the window opening was 1.5 m2. All walls were made of autoclaved aerated concrete (AAC) masonry units of the nominal density class of 600. The walls were tested under initial compressive stresses σc = 0.1; 0.75; and 1.0 N/mm2. The reference models without confinement (six models of the series HOS-AAC without openings and the series HAS-AAC with openings) were prepared from the same masonry units, had almost the same outer dimensions, and were tested under the same initial compressive stresses σc. The analysis was performed for the morphology of cracks, stress values at the moment of cracking and failure, stiffness, and angles of shear strain. The morphology of cracks was found to depend on initial compressive stresses and the presence of an opening. A significant increase in compressive stress leading to cracks and failure stresses was observed with increasing values of initial compressive stresses. As the wall behavior was clearly non-linear, the bilinear relationship described by energy dissipation E, stiffness at the moment of cracking Kcr, and maximum displacement uu was proposed to be included in the engineering description of the relationship between horizontal load and displacement of confined walls. Confinement along the vertical edges of the opening having an area of 1.5 m2 (acc. to EN 1996-1-1) increased the maximum forces Pmax by ca. 45% and marginally affected the ductility of the wall when compared to the elements with circumferential confinement.

Evaluation of the compressive strength of autoclaved aerated concrete in existing masonry

Comparison of Influence of Superficial Strengthening with FRCM System and Kind of Mortar Type on Shear Strength of Autoclaved Aerated Concrete Masonry

Identification of Stress States in Compressed Masonry Walls Using a Non-Destructive Technique (NDT)

Use of the AE Effect to Determine the Stresses State in AAC Masonry Walls under Compression

Experimental Investigation of Bond strength Autoclaved Aerated Concrete (AAC) Masonry

Automatic Image Analysis Method as a Tool to Evaluate the Anisotropy of Autoclaved Aerated Concrete for Moisture and Heat Transport

Material Characteristics of Compressed Dry Masonry Made of Medium-Size Elements with Perlite Aggregate

Experimental and Modeling Investigations on the Water Sorption Behaviors of Autoclaved Aerated Concrete

Comparative Studies of the Confined Effect of Shear Masonry Walls Made of Autoclaved Aerated Concrete Masonry Units

Experimental Study on Basic Mechanical Properties of Core-Column Non-mortar Aerated Concrete Block Masonry

Experimental investigation on the mechanical behaviour of AAC blocks for sustainable concrete masonry

Effective thermal conductivity of moist aerated concrete with different porosities

Investigating the mechanical characteristics of unreinforced and reinforced stone masonry using an experimental database

Application Research of In Situ Axial Compression Method on Brick Masonry

Mechanical Characterization of Historical Masonry by Core Drilling and Testing of Cylindrical Samples

Finite Element Study on the Shear Capacity of Traditional Joints between Walls Made of AAC Masonry Units

Assessing Mechanical Properties of Concrete Block Masonry under Uniaxial Compression for Design Applications

A Comparative Study on Hygric Properties and Compressive Strength of Ceramic Bricks

On the Seismic Performance of Autoclaved Aerated Concrete Self-Insulation Block Walls

Study on the Mechanical Properties of Two General-Purpose Cement–Lime Mortars Prepared Based on Air Lime

Effect of Pore Structure on Thermal Conductivity and Mechanical Properties of Autoclaved Aerated Concrete