Abstract:Systematic errors induced by distortions in the pump pulse of conventional Brillouin distributed fiber sensors are thoroughly investigated. Experimental results, supported by a theoretical analysis, demonstrate that the two probe sidebands in standard Brillouin optical time-domain analyzers provide a non-zero net gain on the pump pulse, inducing severe distortions of the pump when scanning the pump-probe frequency offset, especially at high probe power levels. Compared to the impact of non-local effects reported in the state-of-the-art, measurements here indicate that for probe powers in the mW range (below the onset of amplified spontaneous Brillouin scattering), the obtained gain and loss spectra show two strong side-lobes that lead to significant strain/temperature errors. This phenomenon is not related to the well-known spectral hole burning resulting from pump depletion, but it is strictly related to the temporal and spectral distortions that the pump pulse experiences when scanning the Brillouin gain/loss spectrum. As a solution to this problem, a novel scanning scheme for Brillouin sensing is proposed. The method relies on a fixed frequency separation between the two probe sidebands, so that a flat zero net gain is achieved on the pump pulse when scanning the pump-probe frequency offset. The proposed technique is experimentally validated, demonstrating its ability to completely cancel out non-local effects up to a probe power ultimately limited by the onset of amplified spontaneous Brillouin scattering. The method allows for one order of magnitude improvement in the figure-of-merit of optimized long-range Brillouin distributed fiber sensors, enabling measurements along a 100 km-long sensing fiber with 2 m spatial resolution and with no need of added features for performance enhancement.

Systematic-error suppression in low-coherence Brillouin optical correlation-domain reflectometry

High-resolution low-coherence Brillouin optical correlation-domain reflectometry with suppressed systematic error

Simplified configuration of Brillouin optical correlation-domain reflectometry

Accurate estimation of measurement position in Brillouin optical correlation-domain reflectometry based on Rayleigh noise spectral analysis

Noise mechanism clarification in external-modulation Brillouin optical correlation-domain reflectometry with double-sideband modulator

Recent Progress in Long-Range Brillouin Optical Correlation Domain Analysis

Fiber-tip temperature sensing probe based on standard Brillouin optical correlation-domain reflectometry with sinusoidal modulation

Alternative implementation of simplified Brillouin optical correlation-domain reflectometry

Improvement of Strain Measurement Accuracy and Resolution by Dual-Slope-Assisted Chaotic Brillouin Optical Correlation Domain Analysis

Mechanisms of multi-layered Rayleigh noise in Brillouin optical correlation-domain reflectometry

Investigation of guidelines for improving spatial resolution in direct-modulation BOCDR

Extension of measurement range in optical correlation-domain reflectometry based on temporal gating scheme

High-speed optical correlation-domain reflectometry without using acousto-optic modulator

Long-range high-spatial-resolution distributed Brillouin sensing enabled by correlation-domain encoding

A Time-Differential BOCDA Sensor Measurement System Applied to a 1 km Long SMF Using a Semiconductor Optical Amplifier as a Pump Chopper

Differential Slope-assisted BOCDA Based on Multicore Fiber for High Sensitivity Radial Vibration Measurement

Ultrahigh-speed distributed Brillouin reflectometry

Fiber-optic temperature sensing probe using low-coherence light source

Novel scanning method for distortion-free BOTDA measurements

Spatial-division Multiplexed Brillouin Distributed Sensing Based on a Heterogeneous Multicore Fiber

Noise suppression technique for distributed Brillouin sensing with polymer optical fibers