Abstract:Conventional single-mode fiber (SMF) Brillouin optical time-domain reflectometry (BOTDR) suffers from a low signal-to-noise ratio (SNR) and severe sensing reliability due to the influence of the stimulated Brillouin scattering threshold and bend loss. In this study, a simple and low-cost distributed sensing structure, with a single-mode input fiber alignment fusion and a 50 μm diameter graded index multimode sensing fiber, is designed, and the SNR characteristic is investigated. Through theoretical derivation and experimental verification, a higher SNR and excellent bending resistance are realized in BOTDR. The experimentally measured improvements in the SNR of the proposed sensing structure over the SMF at the beginning and end of a 5 km fiber are 2.5 dB and 1.3 dB, respectively. The minimum bending radius of the sensing structure is 2.25 mm, which is much better than that of the SMFs. The bidirectional optical losses between the SMF and the 50 μm graded index multimode fiber are measured by a simple experiment system and are 0.106 dB and 1.35 dB, respectively. The temperature-sensing characteristics of the sensing structure are measured by the self-built frequency-shift local heterodyne BOTDR sensor, and the measured temperature sensitivity and accuracy are 0.946 MHz/°C and 1 °C, respectively. The design provides a reference for BOTDR with a high SNR and has great potential for structural safety and health monitoring of infrastructures.

Fiber-tip temperature sensing probe based on standard Brillouin optical correlation-domain reflectometry with sinusoidal modulation

Fiber-optic temperature sensing probe using low-coherence light source

Simplified configuration of Brillouin optical correlation-domain reflectometry

Systematic-error suppression in low-coherence Brillouin optical correlation-domain reflectometry

Accurate estimation of measurement position in Brillouin optical correlation-domain reflectometry based on Rayleigh noise spectral analysis

High-resolution low-coherence Brillouin optical correlation-domain reflectometry with suppressed systematic error

Non-Step-Scanning Rayleigh–Brillouin Distributed Fiber-Optic Sensing System Utilizing Double Sideband Modulation

Study on Temperature and Current Sensors Based on Optical Driving Optical Fiber Transmission

Brillouin Optical Time-Domain Reflectometry Based on Hadamard Sequence Probe Pulse

Improvement of Spatial Resolution for BOTDR by Iterative Subdivision Method

Single-Mode Input Fiber Combined with Multimode Sensing Fiber Used in Brillouin Optical Time-Domain Reflectometry

High-speed optical correlation-domain reflectometry without using acousto-optic modulator

Towards high-sensitivity and high-accuracy forward Brillouin scattering-based optomechanical temperature sensing in thin-diameter fibers

Probe Pulse Design in Brillouin Optical Time‐domain Reflectometry

Modulated Pulses Based High Spatial Resolution Distributed Fiber System for Multi-Parameter Sensing

Alternative implementation of simplified Brillouin optical correlation-domain reflectometry

Noise mechanism clarification in external-modulation Brillouin optical correlation-domain reflectometry with double-sideband modulator

Segmental Frequency Modulated Probe for Non-Local Effect Reduction in a Pulse-Coded Brillouin Optical Time Domain Analyzer

Stimulated Brillouin scattering slow-light-based fiber-optic temperature sensor.

Fiber-Optic High-Temperature Sensor Based on Thin-Core Fiber Modal Interferometer

Noise suppression technique for distributed Brillouin sensing with polymer optical fibers