Abstract:Brillouin optical time-domain analysis (BOTDA) using distributed Brillouin amplification (DBA) only requires a milliwatt-level pump to achieve a sensing range beyond 100 km, which provides a powerful tool for temperature/strain sensing. However, similar to the majority of other long-range BOTDAs, the state-of-the-art reports require > 1000 times average, severely restricting the sensing speed. The blind area over tens of kilometers caused by the nonuniform Brillouin response and parasitic amplitude modulation (AM) are crucial factors affecting the signal-to-noise ratio (SNR). Here, a comprehensive performance optimization and substantial enhancement for BOTDA sensors was presented by the direct demodulation of an injection-locked dual-bandwidth probe wave. Injection locking (IL) can completely eliminate the impact of AM noise; dual-bandwidth probe enables self-adaptive pulse loss compensation, thereby intensifying the SNR flatness along the ultralong fiber, and direct probe demodulation can overcome nonlocal effects and allows ∼19.7 dB enhancement of probe input power. Therefore, using only 100 times average, ∼148.3 km sensing, and ∼5 m spatial resolution were achieved with < ∼0.8 MHz standard deviation of Brillouin frequency shift (BFS) over a broad range (∼131.7 km). The reduction in averages was more than 10 times that of the reported majority of long-range BOTDAs. Such performances were achieved without using time-consuming or post-processing techniques, such as optical pulse coding and image denoising. Because this approach is compatible with optical chirp chain technique without frequency sweeping, fast acquisition (0.3 s) was also realized, which has the potential for fast sensing at 3.3 Hz along a ∼150 km fiber.

Recent Progress in Long-Range Brillouin Optical Correlation Domain Analysis

Long-range high-spatial-resolution distributed Brillouin sensing enabled by correlation-domain encoding

Long-Range High-Spatial-Resolution Distributed Measurement by a Wideband Brillouin Amplification-Boosted BOCDA

Systematic-error suppression in low-coherence Brillouin optical correlation-domain reflectometry

Bi-Directional Brillouin Optical Time Domain Analyzer System for Long Range Distributed Sensing

High-Performance Distributed Brillouin Optical Fiber Sensing

Spatial-division Multiplexed Brillouin Distributed Sensing Based on a Heterogeneous Multicore Fiber

Vector Brillouin optical time-domain analysis with Raman amplification and optical pulse coding

Recent Progress in Distributed Fiber Optic Sensors

Simplified configuration of Brillouin optical correlation-domain reflectometry

Performance of long-range loss-mechanism Brillouin optical-fiber time-domain analysis

Design and Realization of Briliouin Optical Time Domain Reflectometer with 34km in Sensing Length

A Comprehensive Bibliometric Analysis of Signal Processing and Pattern Recognition Based on Distributed Optical Fiber

Towards fast sensing along ultralong BOTDA: flatness enhancement by utilizing injection-locked dual-bandwidth probe wave

Development of fully-distributed fiber sensors based on Brillouin scattering

Improvement of Strain Measurement Accuracy and Resolution by Dual-Slope-Assisted Chaotic Brillouin Optical Correlation Domain Analysis

Research hotspots of distributed optic fiber sensor based on Brillouin scattering

Distributed optical fiber sensing: Review and perspective

A Time-Differential BOCDA Sensor Measurement System Applied to a 1 km Long SMF Using a Semiconductor Optical Amplifier as a Pump Chopper

Extension of measurement range in optical correlation-domain reflectometry based on temporal gating scheme