Abstract:Filament-based material extrusion additive manufacturing (MEAM) is one of the most commonly used techniques in additive manufacturing (AM). In spite of recent notable development in the MEAM process, there is still a need to develop more materials that can be printed consistently using this technique. Isotactic polypropylene (PP), a popular thermoplastic material, undergoes rapid crystallization and subsequent volume contraction. This can lead to residual stress buildup in PP parts when processed using MEAM, resulting in poor adhesion to the printing platform, poor geometric tolerance, and mechanical performance. In this work, the effects of varying composition of low molecular weight hydrocarbon resins incorporated to PP are investigated. Specifically, the thermal behavior, crystallization, morphology, and printability of the blends are studied. The rapid crystallization of PP has been delayed by the addition of hydrocarbon resins that provided a larger time window for the residual stresses to relax. The addition of the resins to the pure PP matrix lowers the crystallization temperature of PP from 121.8 to 116.0 °C, which further enables additional diffusion during the solidification process. Polarized optical microscopy demonstrates the differences in crystalline morphology, which is expected to impact the structure at the interlayer boundaries between deposited layers. The combination of modifications in crystallization rate, time, and morphology significantly affects the interlayer adhesion and residual stress state, which directly controls the mechanical properties and part warpage of printed parts. Tensile bars of the different blends were printed in two different orientations to analyze the mechanical performance and study part anisotropy. The maximum tensile stress of pure PP (26.8 ± 2.1 MPa) printed at a ±45° raster angle increased with addition of 20 wt % hydrocarbon resin (32.4 ± 3.0 MPa) when printed under the same conditions. The improvement in the tensile strength is due to a combination of changes in crystallinity, morphology, and improved interlayer adhesion during printing. The parts were annealed postprinting to improve polymer chain diffusion across the layers, thereby improving interlayer adhesion and resulting in tensile modulus and strength values in excess of 90% of injection-molded PP parts.

On the 3D printing of polypropylene and post-processing optimization of thermomechanical properties

Designing 3D printable polypropylene: Material and process optimisation through rheology

Precision control and parameter optimization in screw extrusion 3D printing of polypropylene materials

Preparation and Properties of PP/PET Filament Blends for 3 D Printing Applications

Improving the Mechanical Properties of 3D Printed Recycled Polypropylene‐based Composites Through Adjusting Printing Temperature

Extrusion 3D Printing of Polymeric Materials with Advanced Properties

Compressive behaviors of 3D printed polypropylene-based composites at low and high strain rates

Development of isotactic polypropylene‐based 3D printing materials with good dimensional accuracy and excellent impact properties

Optimizing the Rheological and Thermal Behavior of Polypropylene-Based Composites for Material Extrusion Additive Manufacturing Processes

Thinking Green on 3D Printing: Sustainable Polymer Compositions of Post-Consumer Polypropylene and Tire Rubber Crumbs Intended for Industrial Applications

Material Extrusion-Based Additive Manufacturing with Blends of Polypropylene and Hydrocarbon Resins

Thermal Post-Processing of 3D Printed Polypropylene Parts for Vacuum Systems

Printability and Warpage Evaluation of Polypropylene/Nano Precipitated Calcium Carbonate Composite Prepared by Extrusion-Based 3D Printing

The effect of Polyolefin elastomer on the 3D printing properties of Acrylonitrile butadiene styrene, Polyethylene, and Polypropylene

Desktop printing of 3D thermoplastic polyurethane parts with enhanced mechanical performance using filaments with varying stiffness

Effect of Thermal Processing and Heat Treatment Condition on 3D Printing PPS Properties

The impact of the glass microparticles features on the engineering response of isotactic polypropylene in material extrusion 3D printing

Influence of Thermal Processing Conditions on Mechanical and Material Properties of 3D Printed Thin-Structures Using PEEK Material

On the optimized 3D printing and post-processing of PETG materials

Mechanical and thermal properties of bamboo fiber reinforced polypropylene/polylactic acid composites for 3D printing

Effect of molecular weight on mechanical properties and microstructure of 3D printed poly(ether ether ketone)